Read the guide first to familiarize yourself with the procedure before attempting anything!
Known Issues.
In some regions the Mio Spirit is branded as a Mio Moov Spirit or a Mio Moov S Series, This has WinCE 6 installed, which Tomtom does not run under, If you have SmartST_CE software you are OK, If you have Spirit software use iGO Primo instead!
Want to install iGO Primo as well, Click here!
Please note that for security reasons some links are hidden until the 'thanks' button below is pressed!
See 'Frequently Asked Questions' below if you're having problems!
If you unlocked your device by using another method then start from step #4
1, Connect your device to your PC with a USB cable Device will take a few moments to establish a connection
Browse your device with Windows explorer on your PC and copy everything to a safe location, Don't disconnect yet
2, Download this [Please Register or Login to download file] and extract to your PC and run Setup.exe, then click Install Desktop
[Please Register or Login to download file]
3, Now you need to safely remove the device How to do this depends on your version of Windows but usually it's done by clicking the icon in the tray, or right clicking the icon in My Computer
Your device will now reboot to a blue desktop with a start button at the top and a Smart ST icon, Tapping this icon loads the original software
4, Now you need to download Tomtom...(Passwords: navitotal)
And then download FastActivate
And then go here and download your maps (And latest postcodes if needed) be aware that on some devices you only have 2GB of storage space, and some of that will be taken up already
Also go here for speed cameras if required.
5, Reconnect your device and copy the Navigator folder to the root of your device or SD card
Also copy FastActivate.exe, your map folder and, if needed, the Zip folder as well, copy any speed camera files into the map folder.
6, Disconnect your device
7, Using FileManCE in the Start menu on your device, Navigate to Tomtom Navigator.exe and run it
Tomtom will start and complain in French about not being able to use the maps
8, Reconnect your device to your PC and run FastActivate.exe and wait until it's finished, You only need to click the Maps/Voices/Speedcams button!
9, Disconnect your device again
10, Start Tomtom again the same way as before, and set up everything according to your preferences
For the GPS settings use...
Other NMEA Receiver
Baud: 4800
SirfNavDrv
Or COM:2 if SirfNavDrv isn't available
--------------------------------------------------------------------
Frequently Asked Questions...
How do i change the language?
Go to page six of the settings and tap the icon of some flags, Select your desired language from the list.
How do i set the clock?
The clock, and thus the arrival time in most circumstances will always be wrong, just go to status bar preferences and turn them off, If you run another GPS app first the clock is right, I think Tomtom uses whatever time is in the GPS receiver (Not the system time) when it starts and doesn't update it.
Why does it crash with a 'not enough memory' error?
Tomtom will crash with an out of memory error at first satellite lock and when you change the name of the map folder, It will be OK the next time.
Why does it say 'Tomtom Navigator.exe is not a valid Windows CE application'?
This is common on lower spec devices!
Completely replace the navigator folder with this one. (Password: navitotal)
NOTE: You will have to re-patch your maps/speedcams!
Or you can install iGO 8 from here instead (Link at top of page)
Why does Tomtom say 'You cannot use this map on this device'?
Look for the presence of a {map version}.meta.dct in the map folder, If it's not there then map activation has failed, Is your device connected via Activesync/WMDC?
If it is there then check for the presence of ttgo.bif and ttgo.ori, These are related to the mapshare hack and may interfere with map activation, delete them and try again.
Otherwise check that the map is compatible with Tomtom Navigator.
Why does it say 'No GPS device' even though i set it up like the instructions said?
On some devices starting the original software to set the backlight to maximum locks out the GPS hardware from other software, Find the file Autorun.mscr and either delete it, or edit out the commands to Run, WaitFor and Kill. Please note that the backlight will not be as bright as it was!
Why does it say 'Poor GPS signal'? I set up the GPS as instructed, but it doesn't lock onto the satellites.
In some regions you may need to use 57600 instead of 4800 as the baud rate, possibly these devices have different GPS hardware for some reason.
Why doesn't Tomtom remember any settings i change?
Tomtom Navigator caches all the disk writes and will save them periodically, If you switch off the device these settings are lost. So use the exit option on page three of the main menu after setting everything up to force Tomtom to save the settings to disk, otherwise you'll have to do them again and again and again!
How do i get a shortcut on the desktop?
Open notepad on your PC and type...
"\My Flash Disk\Navigator\Tomtom Navigator.exe" Which is the path to the executable on your device within quotes, If you're installing on to a memory card the path will start \Storage Card\
Count all the characters 47 in the above example
Arrange the text like this...
47#"\My Flash Disk\Navigator\Tomtom Navigator.exe"
Save the file as...
Tomtom.lnk That's LiNK not INK
Make sure it's Tomtom.lnk and not Tomtom.lnk.txt
Your PC will hide .lnk so you'll just have an icon called Tomtom
If Tomtom is installed on a SD card, Substitute Storage Card for My Flash Disk.
Copy this file to the...
Program Files\Unlock\Desktop folder to have it on your desktop OR Program Files\Unlock\Programs to have it in the Start menu.
Sometimes the Desktop and Programs folders are in the drive root!
Or you can use this
How do i make Tomtom start automatically?
Make a shortcut as explained in How do i get a shortcut on the desktop?
Rename Tomtom.lnk to Autorun.lnk and copy it to the Unlock folder and Tomtom will autostart when the device is rebooted, When you exit Tomtom the desktop appears.
How do i stop the debug window popping up after a few minutes?
Find the file Autorun.reg at \Program Files\Unlock
Open it with Notepad, Don't double click the icon though
Copy and paste this text to the end of the file...
[HKEY_LOCAL_MACHINE\Drivers\Console]
"OutputTo"=dword:ffffffff
Save file, Reboot your device, Problem solved!
Why can't i turn off the device like i used to?
On some Mio/Navman devices the power button is not a hardware power button, Just a normal button that when pressed asks the original software to suspend the device, It does it this way so the software can complete disk operations before suspending...
The little app below just monitors the hardware buttons and runs commands based on what is in the PowerButton.ini script
Link TBC
Copy the files from the archive and place into the unlock folder on your device
Boot your device to the desktop
Open FileManCE or other file explorer on your device
Run PowerButtonTest.exe
Tap or slide the switch to off (suspend)
A dialog box should appear with a number in it
Note the number and add the line...
****=off
...to the bottom of PowerButton.ini
Example...
1058=off
Add PowerButton.exe into the Autorun.mscr script
Run (SystemPath("ScriptPath")\"PowerButton.exe")
Can i use Mapshare?
1, Make a copy of TTNAVIGATOR.BIF and rename it to TTGO.ORI and place it in the root of the drive where Tomtom is installed
2, Download and copy these files to the same root directory 4107
3, Rename your map folder to Map
4, Start Tomtom, NOTE: As the map folder has changed Tomtom will crash!
5, Download and install Tomtom Home
6, Connect your device to the PC when Tomtom Home is open, wait for the connection to be established, NOTE: The device will show as a Tomtom One
7, Click Update my device, You don't need to login so click Don't login now
8, Wait for the updates to be retrieved, As Tomtom Home thinks it's a Tomtom One it will offer updates for it, Unselect everything except Mapshare Updates
9, Click Update and wait, Disconnect when done
Can i use celebrity voices?
Yes, Some need activating and some don't, for best results, only copy the voices that need activating into the Voices folder first, run FastActivate again, then copy in the voices that do not need activating afterwards.
Some non activated voices have number id's that match activated voices, FastActivate will generate a .dct for these and they won't work.
Can i use TTS, ALG, IQ Routes, Truck maps or a V8/9 navcore?
No!