I really have no idea if these lines are all there is, nor what the purpose is of every line.
- Code: Select all
;### last edited 14 nov 2010
[device]
;type="navon_N480" ; let primo find out
;### general smartzoom settings
; angle: 0 = from top, 90 = horizontal but crash (max is 89)
[camera]
; common settings
maxdistance=1000
maxdistance2d=1000
; 2D settings
minzoom2d=200
maxzoom2d=1500
defaultzoom2d=1200
; 3D settings
minzoom=40
maxzoom=100
defaultzoom3d=80
minangle=40
maxangle=89
defaultangle=85
angleoffset=25
;### test
overview_enabled=0 ;0 1 Always North Up?
overview_distance=2000
overview_zoom2d=2000
overview_zoom3d=100
overview_angle=0
;### test
speedzoom=0 ; speed dependend zoom
speedzoom_use_minmax=1 ; minzoom/maxzoom
speedangle=1 ; speed dependend cam angle
speedangle_use_minmax=1 ; minangle/maxangle
lowspeed=5 ; if minmax this speed is for min val
highspeed=70 ; if minmax this speed is for max val
;### Entries presets Smartzoom (sc_Set_Presets)
;Camera Presetid 1 (low viewpoint)
[camera1]
; common settings
maxdistance=700
maxdistance2d=700
; 2D settings
minzoom2d=100
maxzoom2d=400
defaultzoom2d=300
; 3D settings
minzoom=40
maxzoom=90
defaultzoom3d=70
minangle=50
maxangle=89
defaultangle=85
angleoffset=20
;### Entries when Signpost is visible (sc_AngleSignPost)
;Camera Presetid 11 (low viewpoint)
[camera11]
; common settings
maxdistance=700
maxdistance2d=700
; 2D settings
minzoom2d=150
maxzoom2d=600
defaultzoom2d=400
; 3D settings
minzoom=40
maxzoom=90
defaultzoom3d=90
minangle=50
maxangle=89
defaultangle=85
angleoffset=0
;Camera Presetid 2 (normal viewpoint)
;[camera2]
;maxdistance=1000
;Camera Presetid 3 (high viewpoint)
;[camera3]
;maxdistance=5000
;Camera Presetid 21 (normal viewpoint)
;[camera12]
;Camera Presetid 31 (high viewpoint)
;[camera13]
[camera.roundabout]
enabled=0 ;(1)
[camera.intersection_zoom]
enabled=1
[other.fm_transmitter]
fmtx_enabled=0 ;needs proper nnghal.dll
;[modules]
;IFM_TRANSMITTER="NNGHAL_FM_TRANSMITTER"
;IFM_TRANSMITTER_MANAGER="FM_TRANSMITTER_MANAGER_IMP"
;[swid]
;activation=device ;getsysentry card or device
[msnd]
enabled=0
;########################################################################
[2d]
carcenter_y=35
label_rendering_order="texts,shields,icons" ;(icons,shields,texts)
building_draw_outline=1 ;(0)
building_maxzoomlevel=500 ;(500)
draw_polygon_contours=0 ;(1)
drop_little_road_segments=1 ;(0)
show_planned_route_arrows=1 ;(1)
road_simplification_level=5 ;(5)
adaptive_2d=1 ;(1)
group_poi_icons=0 ;(1)
max_icons_shown=20 ;(30)
enable_icon_fight=1 ;(0)
use_r1_roadnames_for_r2_if_missing=1 ;(0)
traffic_lights=1 ;(0)
mincarsize=80 ;()
mincarsize_zoomlevel=2000
maxcarsize=150 ;()
maxcarsize_zoomlevel=200
min2dplannedroutewidth=5 ;(5)
render_during_animation=1 ;(0)
;loading_screen_text_color=0xFFFFFF ;(0)
;loading_screen_color=0xFFFF ;(0xFFFF)
double_pixel_enabled=1 ;(0)
[3d]
disable_car_normals=1 ; mdl surface normals discard
anti_alias_buildings=0 ;(0)
anti_alias_landmarks=0 ;(0)
anti_alias_shapes=0 ;(0)
landmark_min_brightness=300 ;(700)
max_pois=60 ;(97)
max_pois_on_horizont=12 ;(17)
use_all_building_textures=0 ;(1)
render_buildings_as_shapes=0 ;(0) buildings (3dc) flat on the ground
roads_as_line_stripes=1 ;(1)
reduce_line_stripes=1 ;(0)
asymmetric_projection=0 ;(0) diffr 3d view
planned_route_visible_behind_mountains=0 ;(1)
;planned_route_track_width=8 ;(10)
;planned_route_track_contour_width=1 ;(2)
;planned_route_contour_width=2 ;(4)
car_antialias_mode=edgeblur ;(supersample) edgeblur
fade_around_cursor=1 ; when click on map buildings fade
fade_distance_for_car=60 ;(20)
fade_overlap_tolerance=50 ;(32)
;tmcroadthickness="0.5" ;(0)
;plannedroutethickness="0.2" ;(0)
;guidancestrip_thickness="0.2" ;(?)
elevate_guidance_strip=1 ;(1)
guidancestrip_elevation=0.08 ;(0)
;guidance_strip_switch_distance_meter=300 ;(600)
;guidancestrip_startscaledist=300
;guidancestrip_stretch=25
;global_ambient=0x7AE147AE ;(0x7AE147AE)
;poi_min_lod=12 ;(11)
;use_vertex_color_triangles=1 ;(1)
cell_road_density=200 ;(400)
;road_polytrack_switch_pixelwidth=10 ;(12)
minimum_flag_distance=5000 ;(50000)
;### visibility and render prio
near_road=1 ;(1)
near_road_prio=1 ;(1)
far_road=1 ;(1) don't render far roads
far_road_prio=10 ;(1)
far_road_prio_shift=10 ;(6)
shapetile=1 ;(1)
shapetile_prio=4 ;(0)
shapeline=1 ;(1)
pois=1 ;(1)
building=1 ;(1) disable buildings
building_prio=15 ;(15)
tracklog=1 ;(1)
cell_lod_modifier=12 ;(8) level of detail? no clue
;min_task_ratio=0
min_task_processing=3 ;1 or 3
;min_camera_height=1 ;(0)
;forced_fov=35 ;() overrides fov?
[3d_config]
roadsign_bitmaps=0 ;(0) 1 in igo9.ini, bmp text balloons
;are the bubbles only active in navigation mode (0) or also in drag mode(1)
;roadsign_always_framed=0 ;(0)
;roadsign_frame_space_size=4 ;(4)
;roadsign_font_size=12 ;(0)
;disable_roadsign_navigation_mode=0 ;(0)
navi_mode_roadsign_dist_limit=800 ;(0)
navi_mode_roadsign_zoomdist_limit=1500 ;(1500)
roadsign_max_refresh_time=800 ;(400)
;rotated_roadsigns=1 ;(1)
;hide_tmc_on_road=0 ;(0)
;default_label_colors=0 ;(0)
;Sprites if [3d_config] roadsign_bitmaps=1
;[roadsign_sprites]
;Sprite names, should be in theme folder
;main="street_name_main.spr"
;left="street_name_left.spr"
;right="street_name_right.spr"
;leg_left="street_name_leftleg_dn.spr"
;leg_mid="street_name_midleg_dn.spr"
;leg_right="street_name_rightleg_dn.spr"
;font_color=32,32,32
;########################################################################
[debug]
;### this creates detailed running logfile for tts etc
;log_1="\Storage Card\igo8_primo\_debug.log::5"
animations=0 ;getsysentry
disablesmartdetour=0 ;getsysentry
tmc_provider_list_plus=1 ;getsysentry
skindebug=0 ;getsysentry
showsuspendmessage=0 ;getsysentry "Back from Suspend"
usenightmode_tunel=1 ;getsysentry
petza_enabled=0 ; somethings with recording/debug?
show_battery_percent=1 ; battery level text below bat icon
experimental_features=1 ; extra settings in extra menu
;leak_check=1 ;looks like primo leaks
;skip_platformlock=1 ;(0) hmmm...
skip_wce6_deviceid=1 ;(0) hmmm...
tmc_all_stations=1 ;(0)
hnr=1 ;(1) use hnr, see [route] minimum_hnr_distance_km
skip_eula=1 ;skip end user lic aggr
;show_frc=0 ;0
smart_2d=1 ;0
earth=1 ;0
show_junction_view=1 ;0 see config\junctionviewXXX.ini
show_gps_pos=1
show_signpost=1
show_oneway=1 ;0
show_oneway_3d=1 ;0
;onewayarrowmode=2
;show_hnr=1
;show_clipboard_path=1
show_arrows_on_route=1
show_lane_info=1
show_poi_areas=1 ;(0)
show_poi_boundingrects=1 ;(0)
;plannedroutethickness="0.8"
;farguidancestripthickness=2
;tmcroadthickness="0.9"
;render_without_focus=0 ;(0)
;double_pixel_mode=0 ;(0)
; TTS settings
tts_min_ready_wav=1 ;(0)
tts_getaway_time=400 ;(0)
tts_expected_engine_delay=1200 ;(0)
reserve_memory=2097152 ;(0) default 4Mb, don't use less that 1Mb (1mb=1048576 2mb=2097152 3mb=3145728)
;memory_low_bound=1048576 ;(0) bits? kb?
;show_performance_memory=1
;show_performance=1
;show_rawdisplay_info=0 ;(0) handy for seeing what igo chooses as display driver
monkeytest_highspeedsun=0 ;(0)
;fov=45 ;(45) for 480_272 is set to 35 in igo9.ini, affects angle/zoom bigger makes 3d car smaller
logitiner=full ;(off) on full, itinerlog.csv on sdcard
;show_turn_penalty=1 ;(0)
;turn_penalty_multiplier=50 ;(100) < 100 accepts more turns in route, try 46 for ECO
turn_penalty_multiplier=40
test_recalc=1 ;(0)
;# Primo 1.1
tmc_info_in_description=1 ;(0)
tmc_extract_no_slipblocks=0 ;(0)
tmc_extract_all_segments=0 ;(0)
tmc_group_mask=xFFFFFFFF ;(0xFFFFFFFF)
use_loader_thread=0 ;(0) 1 shows no roads at all
;########################################################################
[feature]
signpost_nightshading=1 ;(0)
signpost_coloring=1 ;(0)
tmc_event_coloring=1 ;(0)
tmc_traffic_side=1 ;(0)
tmc_show_direction_arrows=1 ;(0)
tunnel_guidance=1 ;(0) 1 causes crash
;########################################################################
[folders]
app="%SDCARD%/iGO8_PRIMO" ; change this if applicable
data="/Storage Card/iGO8_PRIMO" ;
content="/Storage card/igo8/CONTENT"
kmlpoi="userdata\poi" ;"content\userdata\poi"
kmlroute="userdata\route" ;"content\userdata\route"
;user_car="mycars"
tts_nua_v5="\Storage Card\igo8_primo\tts_nua_v5"
tts_loq="\Storage Card\IGO8\TTS_LOQ" ;needs loqmsx.dll LoqTTS6.dll LoqTTS6_util.dll LoqDutch6.5.dll
has_secondary_root=0 ; do not search for other igo8 distributions
;########################################################################
[gps]
disable_advanced=0
;default_latitude="XX.3737921"
;default_longitude="XX.9059051"
read_total_timeout=50 ;(100)
read_buffer_size=128 ;(256)
discard_dop_level=49.0 ;?
min_distance_timestamp=3000 ;(20000)
;background_navigation=1 ;(0)
delay=250 ;(250)
;########################################################################
[icon_manager]
extra_icons="ui_igo9\common\brand_icons" ; in igo9.ini
;########################################################################
[interface]
store_demo=0 ;getsysentry
show_musicplayer=1 ;getsysentry
show_pictureviewer=1 ;getsysentry
;lmg_all_days=1 ;getsysentry
shutdown_time=30 ;getsysentry-> now fixed in 22jul2010 version
show_minimize=1 ;getsysentry
show_exit=1 ;getsysentry
start_navigation_time=5 ;(10) GetSysEntry
show_tutorial=0 ;getsysentry
small_build=1 ;getsysentry
extra_settings=1 ;getsysentry
;start_state="st_MainMenu" ;getsysentry
vfont_enabled=0 ;.vfont files
font_quality=light ;normal lcd lcd_v light mono
align_style=ascender ;ascender full capheight legacy
enable_stateanim=0 ;0
uieffect_enabled=1 ;1
;show_bugreport=1 ;0
;bugreport_audio=0
unreachable_viapoint_as_target=1 ;0
max_distance_for_route_to_poi=2000 ;0x2700
;screen_snap_distance=20 ;20
;mapfontscale=100 ;100 set to 130 in skincfg.ini
;mapfontscale2d= ;
;mapfontscale3d= ;
;mapfontscale3dframed= ;
;highlighted_cityname_first=1 ;0
night_mode_altitude=1 ;0
;make_up_exonym=1 ;1
showexitnum=1 ;1
;builtin_themes= ; skin *.gro *.zip
;theme_day=
;theme_night=
use_separated_daynight_list=0 ;0
minzoom2d=100 ;100
;maxzoom2d= ;calculated
minzoomglobe=100000 ;() 100km 2d zoom before switching to globe view
blendeffect=4 ;4
;min_doubletap_ms=
;min_doubletap_px=
;cleanup_config="config/cleanup.ini"
;laneinfo_signpost_enabled=1 ;(1)
show_detailed_posinfo=1 ;0
show_tmc_config=1 ;(0)
show_gps_config=1 ;(0)
show_orientation=1 ;(0)
show_calibration=1 ;(0)
traffic_voice_recalc=1 ;(1)
traffic_voice_trafficjam=1 ;(1)
max_flag_distance_3d = 5000 ;(-1) always show dest flag in 3d
capture_to_jpeg=1 ;(0) else bmp
highlighted_cityname_first=1 ;(0)
use_autohint=1 ;(0)
useminaspect=1 ;(0)
make_up_exonym=0 ;(1)
compass_velocity=20 ;(10)
;########################################################################
[itiner]
handle_via_passing_as_destination=0 ;(0)
remove_reached_destination=0 ;(1)
pass_destination_radius=200 ;(0)
pass_destination_distance=50 ;(0)
pass_via_distance=100 ;(0)
show_prev_manuevers=1 ;(0)
show_only_till_next_viapoint=0 ;(0)
show_only_ahead_of_car=1 ;(0)
displayed_warnings="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17" ;(1,2,3,8,9,10,11,12,13,14,15,16,17)
;########################################################################
[map]
set_max_bubble_labels=8 ;(5)
3d_scale_carmodel=1 ;(1)
3dcarsizemulwithfov=50000 ;(0)
3dcarsizemin=6000 ;(10000)
3dcarsizemax=18000 ;(28000)
3dcarsizemul=30000 ;(40000)
3d_max_tiltlevel=8500 ;(7800)
3d_default_tiltlevel=8500 ;(7800)
zoomlimitedtilt=0 ;(0)
3d_min_zoomlevel=20 ;(30)
3d_max_zoomlevel=800 ;(600) before switch to 2D, getsysentry is 14000
;3d_max_zfar=64 ; still used? Not in Primo
tiltfactor=50 ;(150)
zoomfactor=1.02 ;(?)
rotfactor=20 ;(10)
;minimum_zoom_amount=70 ;()
;minimum_tilt_amount=70 ;()
;minimum_rotate_amount=15 ;()
;minimum_3d_zoom_percent=100 ;(100)
max_road_segment_count=1000 ;(2000)
sieve_mode=0 ;(1) 0=wireframe faded buildings, separate what?
;###housenr_corner_offset=0 ;(0) causes crash with 3dl/3dc on
shade_factor_min=0.5
shade_factor_max=1.3
3d_brunnel_tunnel_shutdown=5
;poi_iconid_near=1 ;(1)
;poi_iconid_distant=0 ;(0)
;poi_distant_distance=2000 ;(3000)
;poi_grouping_distance=
speedcam_visibility=1500 ;(2500)
;car2wp_as_route=1 ;(1)
;speedwarn_icon="$speedwarn.spr" ;("$speedwarn.spr")
;tmczoommin=3000 ;(3000)
;tmczoommax=60000 ;(?)
;tmczoommini=30000 ;(30000)
;tmczoomsmall=8000 ;(8000)
;3d_tmc_road_extra_width=0 ;(0)
;auto_nightmode=1 ;(1)
;nightmode_dependent_backlight=1 ;(1)
3d_buildings=0 ;(1)
3d_landmarks=1 ;(1)
raster_in_2d=0 ;(1)
raster_in_3d=0 ;(0)
raster_2d_high_quality=0 ;(1)
shapes_in_2d=1 ;(1)
show_oneway=1 ;(1)
follow_gps=1
auto_set_2d_on_map=0 ;(0)
auto_set_3d_on_cockpit=0 ;(0)
poi_labels=1 ;(1)
;no_road_rotate_speed_min=10 ;(10)
enable_rotated_move=1 ;(0)
;move_zoom_divider=15 ;(15)
enable_move_cursor_on_move=1 ;(0)
;center_animation=1 ;(1)
;3d_snap_distance=50 ;(50)
;2d_snap_distance=50 ;(50)
;3d_jump_distance=500 ;(500)
;2d_jump_distance=50000 ;(50000)
;grayscale=0 ;(0)
;########################################################################
[map_update_checker]
enabled=0
;########################################################################
[mydata]
cityhistory_size=1000 ;(300)
max_quicklist=250
[mydata.smart_history]
max_smart_items=4 ;getsysentry
[mydata.tracks]
auto_track_visible=1 ;(0)
;########################################################################
[navigation]
gps_pos_to_road=1 ;(1)
waypoint_radius=800 ;(300) waypoint visited if < 300 mtr?
waypoint_radius_multiplicator=1 ;(1)
track_simulation_speed=5 ;(3)
;onlyguidancetime=5 ;(0) skip to secs before next maneuvre
;onlyguidancedist=500 ;(100) when simulate skip to distance before next maneuvre
autoreplan_action=AUTO ;(AUTO)
pedestrian_pos_filter_enabled=1 ;(1)
slowspeed_time=5 ;(5)
slowspeed_limit=5 ;(5)
show_city_in_next_street=1 ;(1)
show_city_in_next_street_distance=1000 ;(1000)
junction_view_type="NNG" ; used by UI to determine which JV type to use, other options are "NNG_NQ" or "NQ"
junction_view_at_maneuver=0 ;(1)
junction_view_on_highways_only=1 ;(1)
junction_view_distance=150 ;(200)
junction_view_distance_ramp=300 ;(400)
junction_view_distance_highway=400 ;(800)
simple_crossborder_warning=0 ;(0)
crossborder_warning=real ;(off) simple real smart
turn_direction_ding=1 ;(0) config/turndir.csv
max_exit_number=9 ;(9)
dead_reckoning_duration=480000
use_duration_for_tunnel=0
stop_at_tunnel_end=1
;sim_speed_factor=2 ;(0)
onlyguidancedist=100 ;(100) skip simu to last 100 mtr next maneuvre
onlyguidancetime=0 ;(0) skip simu to last x sec next maneuvre
;########################################################################
[oasis]
exclude_directories="PICTURE::%SDCARD%/,PICTURE::%myflashdisk%/"
include_directories="PICTURE::%SDCARD%/Pictures/"
[oasis.pictures]
slideshow_time=3
slideshow_effect=1
slideshow_loop=1
loadhq=0
large_pict_size=1024
;########################################################################
[other]
demo_enabled=0 ;1 No demo button in navigate
multiple_voice=0 ;(0) Uses english tts voice for alerts :)
;########################################################################
[phone]
show_dialer=1 ;getsysentry
show_hangup=1 ;getsysentry
show_bluetooth=1 ;getsysentry
;########################################################################
[poi]
use_multi_poi_icon=0 ;(1)
;### poi_grouping_disctance etc in mapstates.ini [default]
userpoi_has_mypoi=1 ;(0)
use_lastknowngps=1 ;(0)
; Airport, Business, Car_Dealer_Repair, Communication, Community, Finance Leisure
; Medical, Nature, Parking, Petrol_Station, Rent_A_Car, Restaurant, Shopping, Sport
; Tourist_Attractions, Transportation
sort_order="Petrol_Station,Parking,My Poi,Restaurant,Shopping,Accomodation,Medical" ;("Restaurant,Accomodation,Petrol_Station,Parking,Medical")
priority="Petrol_Station,Parking,My Poi,Restaurant,Shopping,Accomodation,Medical" ;("Restaurant,Accomodation,Petrol_Station,Parking,Medical")
sort_by_config=1 ;(0)
picturepoi_show_all_containers=1
picturepoi_has_mypicturepoi=1
;########################################################################
[power]
;skip_suspend_process_all=1 ;getsysentry
powermgm_state=1
allow_battery_full=1
;########################################################################
[rawdisplay]
gx_force_using_dll=1 ;(0)
;force_15_bpp=1 ;(0)
driver=GX ;GLES GX GDI
;see multimode.ini
;stretch=1
;stretch_x=1
;stretch_y=1
;########################################################################
[route]
min_suspend_time=1800000 ;getsysentry
trip_offset=1000 ;getsysentry
;### if you fiddle with these delete save/route.dat before starting igo
planned_route_weight=1 ;(7) smaller is less nervous recalc (0 to 10)
correctness=95 ;(88)
route_type=ECO ;(FAST,ECO,SIMPLE,SHORT,SCENIC,MOST_FREEWAYS,LEAST_FREEWAYS) GREEN
speed_profile_weight=100 ;(100)
;fixed_correctness=? ;?
vehicle_type=7 ;0...6(7 8 9) car taxi bus truck emergency pedestrian bicycle (7=slow_car 8=fast_car 9=motorcycle)
;### vehicle_type=7 slow_car
slow_car_speed=70 ;(80) affects routing and time
slow_car_multiplactor=90 ;(80) affects routing and time
;### vehicle_type=8 fast_car
fast_car_speed=120 ;(130) affects routing and time
fast_car_multiplactor=100 ;(100) affects routing and time
;### vehicle_type=9 motorcycle
motorcycle_speed=120 ;(130) affects routing and time
motorcycle_multiplactor=100 ;(100) affects routing and time
offroad_speed=20 ;(30)
permit_penalty=1000 ;see [truck]
charge_penalty=1000 ;(0)
toll_penalty=100 ;(0)
bridge_penalty=100 ;(0) in meters?
tunnel_penalty=0 ;(0)
uturn_penalty=5000 ;(1000)
low_speed_zone_penalty=90 ;(0)
straight_start_on_recalc=0 ;(0) 1 is auto recalc bug?
continue_with_ferry=1 ;(0)
handle_freeway_as_highway=0 ;(0)
allow_offroad_waypoints=1 ;(0)
minimum_hnr_distance_km=100 ;(100) use hnr if trip > 100 km
auto_enable_crossborder=1 ;(0)
guidance_at_highway_entry=1 ;(0)
;# Primo 1.1
;allow_4wd=0 ;(0)
;fuel_consumption_urban=
;fuel_consumption_rural=
;engine_type=
fuel_cost="1.5"
[route.histspeed]
enabled=0 ;(1)
show=0 ;(0)
use_timeslice=1 ;(0) start.lua switches it off anyway
[route.histspeed.timeslice]
day=0 ;(0)
hour=0 ;(8)
minute=30 ;(0)
;########################################################################
[scheduler]
disable_smooth_anim=1 ;(0)
;########################################################################
[screen]
daymode_until_no_time_sync=1 ;(0)
;preferred_orientation=0
orientation_lock=0 ;(0)
;########################################################################
[sound]
;ding=0 ;no annoying announcement ding
maneuver_chimes=0 ;no annoying announcement ding
wheelsound=1 ;(0) scroll list sound
dynamic_volume_type=1 ;(1)
;dynamic_volume_minspeed=30 ;(90)
;dynamic_volume_maxspeed=120 ;(150)
;dynamic_volume_voicemaxspeed=100 ;(120)
;dynamic_volume_voice_volume_max=100 ;(64)
;dynamic_volume_os_volume_max=255 ;(255)
;dynamic_volume_os_amplification_step=-1 ;(-1)
;dynamic_volume_autocalc_maxvoicespeed=0 ;(0)
tts_volume=255 ;(255)
guidance_volume=255 ;(255)
alarm_volume=255 ;(255)
effect_volume=255 ;(255)
mic_volume=255 ;(255)
user_volume=175 ;(255)
;welcome="Broem"
[sound.announcer]
gps_signal_lost=1
gps_disconnected=1
[sound.speech]
delay_msec_between_speeches=600 ;(0)
advanced_guidance_ding=1 ;(0)
;########################################################################
;XXXXX_sound="!proxi"
;XXXXX_tonal_type=none ;speech alert none
;XXXXX_speech="Something to say"
;XXXXX_spoken_type=none ;speech alert none
;overspeed
;section_beep
;section_start
;section_end
;approach_beep
;activated
;Primo Speedcam Types
;0 - normal speedcam
;1 - mobile cam
;2 - Traffic Light with Speed check Camera
;3 - avarage speed trap
;4 - Redlight only
;5 -
;6 -
;7 -
;8 -
;9 -
;10 -
;11 -
;12 -
;13 -
;see also [warning]
[speedcam_category:0]
activated_spoken_type=speech
activated_speech="U nadert Flitser!"
approach_beep_spoken_type=speech
approach_beep_speech="Flitser 0"
overspeed_spoken_type=speech
overspeed_speech="Te snel. Flitser!"
activated_min_speech_repeat_delay=5000 ;msecs?
[speedcam_category:1]
activated_speech="U nadert Flitser!"
approach_beep_spoken_type=speech
approach_beep_speech="Flitser 1"
overspeed_spoken_type=speech
overspeed_speech="Te snel. Flitser!"
activated_min_speech_repeat_delay=5000 ;msecs?
[speedcam_category:2]
activated_speech="U nadert Flitser!"
approach_beep_spoken_type=speech
approach_beep_speech="Flitser 2"
overspeed_spoken_type=speech
overspeed_speech="Te snel. Flitser!"
activated_min_speech_repeat_delay=5000 ;msecs?
[speedcam_category:3]
activated_speech="U nadert traject controle!"
approach_beep_spoken_type=speech
approach_beep_speech="Flitser 3"
overspeed_spoken_type=speech
overspeed_speech="Te snel. Flitser!"
section_start_spoken_type=speech
section_start_speech="start traject controle"
section_beep_spoken_type=speech
section_beep_speech="Te snel. traject controle!"
section_end_spoken_type=speech
section_end_speech="einde traject controle"
activated_min_speech_repeat_delay=5000 ;msecs?
[speedcam_category:4]
activated_speech="U nadert Stoplicht Flitser!"
approach_beep_spoken_type=speech
approach_beep_speech="Flitser 4"
overspeed_spoken_type=speech
overspeed_speech="Te snel. Flitser!"
activated_min_speech_repeat_delay=5000 ;msecs?
[speedcam_category:10]
activated_speech="U nadert Flitser!"
approach_beep_spoken_type=speech
approach_beep_speech="Flitser 10"
overspeed_spoken_type=speech
overspeed_speech="Te snel. Flitser!"
activated_min_speech_repeat_delay=5000 ;msecs?
[speedcam_category:11]
activated_speech="U nadert Stoplicht Flitser!"
approach_beep_spoken_type=speech
approach_beep_speech="Flitser 11"
overspeed_spoken_type=speech
overspeed_speech="Te snel. Flitser!"
activated_min_speech_repeat_delay=5000 ;msecs?
[speedcam_category:15]
activated_speech="U nadert betaalde zone!"
approach_beep_spoken_type=speech
approach_beep_speech="Betaalde zone"
activated_min_speech_repeat_delay=5000 ;msecs?
[speedcam_category:31]
activated_speech="U nadert gevaarlijk punt!"
approach_beep_spoken_type=speech
approach_beep_speech="Gevaarlijk punt!"
activated_min_speech_repeat_delay=5000 ;msecs?
;########################################################################
[strapon]
discard_state_timeout=60000 ;(30000) 60 secs
max_position_distance=800 ;(300)
min_gps_precision=50 ;(0) gps.accuracy
max_gps_precision=100 ;(0) gps.accuracy
;min_discard_prob= 0.0 ;(????)
min_distance_for_move_at_low_speed=50 ;(20)
max_speed_for_stop=2 ;(0)
min_distance_for_switch_off_stopping=50 ;(100)
min_speed_for_release_stopping_off=5 ;(10)
offroad_handling=1 ;(0)
debug_offroad_alert=0 ;(0)
disable_heading=0 ;(0)
;########################################################################
[tmc]
enable_flow_icons=1 ;(0) need $traffic_speed.spr
enable_flow_events=1 ;(0) haven't seen any flowing
flow_stripe_blinking_time=1000 ;(0) in msecs
show_all_provider_list=1 ;(0)
near_provider_distance_km=100 ;(30)
auto_band_search_up=0 ;(0)
auto_tuning=1
;use_new_standard=1
ignore_sid=1
;########################################################################
[traffic.settings]
load_default_traffic_settings=1 ;config/tmcsettings.ini
traffic_enabled=1
use_extra_setting_for_flow_events=1
use_speed_color_codes=1
;flow_speed_coloring=4 ;(4)
always_use_flow_coloring=1 ;(0)
announce_recalc_on_auto_only=1 ;(0)
detour_acceptance_mode=2
detour_spare_time_threshold=900 ; detour if 15 minutes lost due to traffic
;########################################################################
[tripcomputer]
num_of_trips=3
;########################################################################
[truck]
vtr=519 ;default truck VTR
max_restriction_level=0
;########################################################################
[tts]
priority="HIGH" ; CRITICAL VERY_HIGH HIGH NORMAL LOW VERY_LOW
tts_buffer=32786 ;(10240=10k) 32786=32k
automatic_direction_conversion=1 ;(1)
announce_exit_directions=0 ;(0) 1 says first place on exit sign, 2 say road name
skip_exit_numbers=0 ;(0) 1 or 2?
skip_road_numbers=0 ;(0) 1 or 2
always_say_road_names=2 ;(0) 1 or 2 or 3 (Rijksweg A4)
;########################################################################
[warning]
approach_beep_distances="8,16,24" ;("8,16,24")
warn_distances="120:1000,100:800,80:500,50:300" ;("110:1000,80:800,60:500,40:300")
speedcam_enabled=1 ;(0)
speedcam_visualtype=1 ;(1) default visual type 0 or 1
speedcam_soundtype=1 ;(1) 1=warn if overspeed 2=approach
speedcam_soundtype_4=2 ; ()
speedcam_visualtype_4=1 ;()
speedcam_warning=1 ;(0)
;speedcam_check_frc=1
speedcam_max_lookahead=1200 ;(1000)
speedwarn_alt_builtup_based=1 ;(0)
speedwarn_alt_limit=1 ;(0)
speedwarn_alt_tolerance=110 ;(100)
speedwarn_alt_toltype=1 ;(0) alternative tolerance type
speedwarn_tolerance=110 ;(100)
speedwarn_toltype=1 ;(0) absolute or percentage
speak_tts_only=0 ;(1)
;speedcam sounds (tts and non tts] are in data.zip:project_config\igo9.ini [speedcam_category:X]
;########################################################################
[warning.driveralert.settings]
max_display_count=3 ;(3)
show_timeout=10 ;(3)
show_vehicle_pictograms=1 ;(1)
preactivate_distance=100 ;(100)
;truck_policy=0 ;(0)
;show_cat=
;warn_cat=
warn_method=2 ;(2)
;########################################################################
[Folders]
app = "Storage Card \ Primo", according to your device instead of Storage Card write SDMMC or sdcard
content = "Storage Card \ Primo \ content"
map = "Storage Card \ Primo \ content \ map"
kmlpoi = "userdata \ poi"; "content \ userdata \ poi"
kmlroute = "userdata \" route ";" content \ userdata \ "route"
has_secondary_root = 0; must have in sys.txt if you have other navs on same SD card
[Interface]
show_exit = 1
extra_settings = 1; extra settings menu to appear.
resolution_dir = "480_272"
vga = 0
[Rawdisplay]
highres = 0
screen_x = 480
screen_y = 272
stretch = 1
[Debug]
skip_eula = 1
experimental_features = 1; Speedcam insertion point, choose to be avoided over the map and so on. making them.
[Sound]
ding = 0; =0 no ding, =1 ding sound
[Shutdown_time]
interface = 0; you take the plug in the device or the vehicle's ignition and the meter is running and closes when you close the window of the SHUTDOWN, if you want to block this text to add the following entry in sys.
; (3DCarS to set the size)
[Map]
3dcarsizemin = 12000; 10000
3dcarsizemax = 18000; 15000
3dcarsizemul = 30000
[Warning]
speedcam_warning = "1"
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx