how do i run IGO8_8.3.2.79297 on eonon G2213D

------------------------------------------------------
------------------------------------------------------
------------------ Crash Log Begin -------------------


Current System time: "2011-12-18 03:33:33"
Build: 8.3.2.79297 Built @ Mar 2 2009 - 16:21:02

Memory Stats:

FreeMemory: 1 MB, 780 KB, 0 B
TotalUseableMemory: 27 MB, 388 KB, 0 B
MaxMemory: 132 MB, 0 KB, 0 B
ReservedMemory: 4 MB, 0 KB, 0 B
ActualCacheSize: 5 MB, 852 KB, 720 B
GarbageSize: 5 MB, 899 KB, 653 B



--------------------------------------------------------------------------
Process Name PID BaseAddr ParentPID PrioBase
--------------------------------------------------------------------------
IGO8.EXE 0x23c17e26 0x0c000000 0x00000000 0x00000003
--------------------------------------------------------------------------
--------------------------------------------------
Modules Name BaseAddr BaseSize
--------------------------------------------------
toolhelp.dll 0x03ed0000 0x00005000
oleaut32.dll 0x03a20000 0x0002f000
ole32.dll 0x03a50000 0x0002e000
coredll.dll 0x03f70000 0x0008d000
--------------------------------------------------

--------------------------------------------------------------
Threads TID BasePrio DeltaPrio
--------------------------------------------------------------
0x430eefc2 249 0
0xa19114b2 250 0
0x63450fca 251 0
0x23b9efd6 251 0
--------------------------------------------------------------


Exception: 0xc0000005
At address: 0x004a9a54
Access violation reading address: 0x80807f84
0x004a9a54 (A)


WinCE CallStack snapshot (function names unknown - map file \StorageCard\IGO8_8.3.2.79297\IGO8.map not found):

0x0c5f33b0 (A)
0x0c5f32cc (A)
0x0c5f271c (A)
0x0c5f2818 (A)
0x0c1a5b90 (A)
0x0c1a5b5c (A)
0x03fac878 (A)
0x03fb3d04 (A)
0x8022b81c (A)
0x8025551c (A)
0x8022f640 (A)
0x8022b734 (A)
0x0c4a9a54 (A)
0x0c4a9f38 (A)
0x0c4ad364 (A)
0x0c4afaf8 (A)
0x0c15f43c (A)
0x0c0f9da4 (A)
0x0c11b290 (A)
0x0c1a03f4 (A)
0x0c1a4004 (A)
0x0c1aa298 (A)
0x0c3c0278 (A)
0x0c0a22f8 (A)
0x0c0a4fb8 (A)
0x0c0a5fd8 (A)
0x0c1ab8f4 (A)
0x0c1a55c0 (A)
0x0c1a5b04 (A)
0x0c616094 (A)
0x03f8dd0c (A)


Global status:

bInFocus: 1
bMouseDown: 0
bInLogic: 0
bInRender: 1
CurrentState[128]: st_NavigateMap
GPS Pos: (150.844960,-34.667908)
Camera: pos:(150.844898,-34.667930) rot:251 persp:6208 zoom:500.000000 eng=2)


State queue:

0. st_NavigateMap


Waypoints:



Maps:

map\Australia.fbl ver:0x02d6 time:0x4b744f0d
map\Australia.fbl ver:0x02d6 time:0x4b744f0e
map\Australia.fbl ver:0x02d6 time:0x4b744f11
map\Australia.fbl ver:0x02d6 time:0x4b744f11
map\Australia.fbl ver:0x02d6 time:0x4b744f12
map\Australia.fbl ver:0x02d6 time:0x4b744f13
map\Australia.fbl ver:0x02d6 time:0x4b744f15
map\Australia.fbl ver:0x02d6 time:0x4b744f16
map\Australia.fbl ver:0x02d6 time:0x4b744f17
map\Australia.fbl ver:0x02d6 time:0x4b744f17
map\Australia.fbl ver:0x02d6 time:0x4b744f18
map\Australia.fbl ver:0x02d6 time:0x4b744f1b
map\Australia.fbl ver:0x02d6 time:0x4b744f1c
map\NewZealand.fbl ver:0x02bf time:0x493cefe7


------------------- Crash Log End --------------------
------------------------------------------------------

bubbsy350 wrote:yes i did but when i ran WinCE Device Information V2 it came up with 480_234 so it is 800_480 ???
just a little lost with your link im only new

I can see that you're lost and confused so I'll be more gentle. Your crash log is still showing that you're trying to run v. 79297 - actually a good version! I'm trying to update it for you with a newer version. So do this:

1. Back-up whatever is presently on your SD card to your computer in case something goes wrong. This way you'll have something to go back to.
2. AFTER backing up, delete everything from your SD card.
3. In post #6, I link you to another 2din member that I was successful with. Read it from post #10.
4. In that thread link, I want you to download my iGO8 program.
5. Using "Winrar", extract the downloaded program to your SD card.
6. Read that linked thread because there is information that you will probably need to make entries to the sys.txt and add whatever you might need to for your specific device. BTW, your resolution is 800_480 and has nothing to do with 480_234.
7. After extracting the program to your SD card, add the content. Maps [.fbl] go into content\map.
8. Completely shutdown your device, wait a few seconds and restart.

ok downloaded and put onto sd card added aus maps and pois changed sys.txt to resolution_dir="800_234"
also tried to add

[rawdisplay]
class="landscape"
highres=1
screen_x=800
screen_y=480

but i just keeps reloading i also noticed from where i bought it from says
The GPS device and the SD card aren't equipped with any version of the IGO software nor maps
ill put up new sys.txt let me know where i stufed it up
and thanks for your help

[folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0


[interface]
resolution_dir="800_480"
vga=0

[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"


[map]
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0


[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80


[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street


[rawdisplay]
highres=0


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10


[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10

bubbsy350 wrote:ok downloaded and put onto sd card added aus maps and pois changed sys.txt to resolution_dir="800_234"

NO! 800_480 not 234. Also you might need to add your device specific information.

do i add that to top of sys.txt

bubbsy350 wrote:do i add that to top of sys.txt

Yes, fine.

Post your new sys.txt with the edits.

this comes up for system info so i guess i also chang it to 800_400

WinCE Device Information V2, 2011 Fatboyfun http://www.navitotal.com

DEVICE INFORMATION.
Screen resolution 480x234
Windows CE 5
Free / Total RAM available 35976 KB / 42912KB

AVAILABLE DRIVES GREATER THAN 128MB. (Free / Total)
NOTE: Mortscript only reads up to 2047MB
\Storage Card (1323MB/1883MB)

GPS INFORMATION.
Port=1
Baudrate=38400

DEVICE INFORMATION.
Screen resolution 800x480
Windows CE 5
Free / Total RAM available 35976 KB / 42912KB

AVAILABLE DRIVES GREATER THAN 128MB. (Free / Total)
NOTE: Mortscript only reads up to 2047MB
\Storage Card (1323MB/1883MB)

GPS INFORMATION.
Port=1
Baudrate=38400


[folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0


[interface]
resolution_dir="800_480"
vga=0

[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"


[map]
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0


[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80


[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street


[rawdisplay]
highres=0


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10


[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10

If the above is the actual sys.txt you are trying to use, you have duplicate category headers:
[rawdisplay]
[map]....
This is usually not a good idea. You should consolidate these...and also, it is sometimes good to put the category headers into alphanumerical order:
[1]

[2]

[a]

[b]

etc.

ok changed back to 480_234 to see what happens and it started working but its unable to find gps signal it thinks in in another state

bubbsy350 wrote:unable to find gps signal

Did you go outside in the open air with a clear view of the sky for 30 minutes or so?

yes but it did not pick up:(

Add this to your sys.txt, restart the device, and try again:
[gps]
port=1
baud=38400