ForumHi guys, I am complete newbie and desperately need some help with installing IGO8 on my recently purchased Eonon GM5153 with the following GPS specifications:
Operation System: Microsoft Windows CE.NET 6.0
CPU: SIRF atlas V——500 MHZ
SDRAM: 128MB
NAND FLASH: 128M
Map Storage Mode: Micro SD CARD (with a KUDOS 4G Micro Card)
GPS Model: SIRF V
Max Channels: 64
Sensitivity: -161Dbm
Cold Start: 38S
Warm Start: < 32 S
Hot Start: < 1 S
Max altitude: 18,000 M
Max velocity: 515 M/S
SD Card slot for updating maps: Yes
Setup the world time zone freely: Yes
Complete computerized turn by turn voice guidance: Yes
Support 2D/3D Map Views: Yes
Memory stores previous destinations: Yes
POI(Point of interest) Search Option: Automotive Service/Hotel/Eat & Drink/Shopping/Leisure Centre/Medical Services/Transport Information and so on
I have owned another Chinese GPS unit for a number of years (all it sais on the box is GPS Navigator) which came with IGO 8.3.4.142975 on a MSD card and I thought I'd be able to use the latter on the Eonon but unfortunately I got the error message "program application database cannot be found". Initially the igo.exe was within a folder called IGO8 but then I installed it within the root directory on a formatted SD and still the same message appeared).
Below is a copy of the crash log:
Any help will be greatly appreciated.
- Contact •
- FAQ •
- Register •
- Login
- View unanswered posts • View active topics
-
Board index ‹ PDA/PNA Navigation ‹ iGO, MioMap and other ‹ General Discussions about iGO core
IGO 8 on Eonon GM5153
20 posts
• Page 1 of 2 • 1, 2
IGO 8 on Eonon GM5153
by navigatorbg » Fri Jul 25, 2014 10:20 am
Last edited by navigatorbg on Sat Jul 26, 2014 8:24 pm, edited 1 time in total.
-
navigatorbg
offline
- Joined: Sat Jul 12, 2014 11:22 am
- Posts: 8
- Has thanked: 3 times
- Been thanked: 0 time
Re: IGO 8 on Eonon GM5153
by filesupload100 » Fri Jul 25, 2014 11:04 am
As a good start, reading is a good idea:
About error messages read here.
In addition, you can read this tutorial of "how to install iGO"
Another option:
You didn't told us if the new device came with a navigation application, and you just want to replace it with the iGo from your old device.
First rule is that the folder of the nav app and the exe file must be the same when replacing or upgrading it.
If there is no application with the device, the device should have the option to locate (within the menu) where the application is. Point it to the location where the igo is on the SDcard.
Anyway, this is a good chance to upgrade to iGO 8.3.5.
About error messages read here.
In addition, you can read this tutorial of "how to install iGO"
Another option:
You didn't told us if the new device came with a navigation application, and you just want to replace it with the iGo from your old device.
First rule is that the folder of the nav app and the exe file must be the same when replacing or upgrading it.
If there is no application with the device, the device should have the option to locate (within the menu) where the application is. Point it to the location where the igo is on the SDcard.
Anyway, this is a good chance to upgrade to iGO 8.3.5.
-
filesupload100
offline
- Joined: Mon Nov 12, 2012 5:38 pm
- Posts: 822
- Location: Israel
- Has thanked: 88 times
- Been thanked: 1249 times
- Age: 63
Re: IGO 8 on Eonon GM5153
by nabi » Fri Jul 25, 2014 12:46 pm
The location (as I read in the crash file) seems to be : \SDMMC\IGO8\
This would be an indication about what lines should be in sys.txt, that is IF needed.
When lines that somehow look like this :
[folders]
app=”%SDCARD%/iGO8”
just comment them out. Do that by putting a semicolon - that is a ; - in front of app=”%SDCARD%/iGO8” ==> ;app=”%SDCARD%/iGO8”
When that is working, that is all there is to be done. When not, then experimenting begins. SDCARD must be SDMMC of course, but with or without the %s, with "/" or with "\", with or without the "s, ...
And let me repeat once more that the error message "map file not found" does not point to maps missing but to the file igo.map (extension .map) that is only useful to programmers and missing in the free builds.
This would be an indication about what lines should be in sys.txt, that is IF needed.
When lines that somehow look like this :
[folders]
app=”%SDCARD%/iGO8”
just comment them out. Do that by putting a semicolon - that is a ; - in front of app=”%SDCARD%/iGO8” ==> ;app=”%SDCARD%/iGO8”
When that is working, that is all there is to be done. When not, then experimenting begins. SDCARD must be SDMMC of course, but with or without the %s, with "/" or with "\", with or without the "s, ...
And let me repeat once more that the error message "map file not found" does not point to maps missing but to the file igo.map (extension .map) that is only useful to programmers and missing in the free builds.
Re: IGO 8 on Eonon GM5153
by navigatorbg » Fri Jul 25, 2014 9:07 pm
Thanks for the replies! When I used the semicolon in front of app="SDMMC/iGO8" the program started without any issues. The only problem now is that it cannot find any satellites (went to the GPS settings and changed port and baud but the result was still the same)!
I also tried filesupload100's suggestion to upgrade to iGO 8.3.5 - installed the files, used the semicolon again, the program started, found the satellites (full bar) but this time the resolution was not right (the application opened in the top left corner of the screen and took approx 1/4 of it! My unit is 800x480 and the sys file is showing resolution_dir="480_272" (there is no [rawdisplay])
I also tried filesupload100's suggestion to upgrade to iGO 8.3.5 - installed the files, used the semicolon again, the program started, found the satellites (full bar) but this time the resolution was not right (the application opened in the top left corner of the screen and took approx 1/4 of it! My unit is 800x480 and the sys file is showing resolution_dir="480_272" (there is no [rawdisplay])
-
navigatorbg
offline
- Joined: Sat Jul 12, 2014 11:22 am
- Posts: 8
- Has thanked: 3 times
- Been thanked: 0 time
Re: IGO 8 on Eonon GM5153
by navigatorbg » Fri Jul 25, 2014 10:00 pm
Tried this already, but there must be sth else as well because the application is still within the top left corner, taking approx. 1/4 of the screen but inside the "small" window the object are large, hence I cannot see everything...
-
navigatorbg
offline
- Joined: Sat Jul 12, 2014 11:22 am
- Posts: 8
- Has thanked: 3 times
- Been thanked: 0 time
Re: IGO 8 on Eonon GM5153
by navigatorbg » Fri Jul 25, 2014 10:05 pm
I also added [rawdisplay] screen_x=800 screen_y=480, but then I got error messages which lead me to replace the branding and data .zip folders and still got the same error message (FFUI ERROR). Now I'm stuck...
-
navigatorbg
offline
- Joined: Sat Jul 12, 2014 11:22 am
- Posts: 8
- Has thanked: 3 times
- Been thanked: 0 time
Re: IGO 8 on Eonon GM5153
by navigatorbg » Fri Jul 25, 2014 10:34 pm
I managed to find the correct path by using a file manager (total commander). The only outstanding problem now seems to be the resolution... Below is a copy of the sys file. Any suggestions please (bearing in mind my previous posts...)?
Last edited by navigatorbg on Sat Jul 26, 2014 8:23 pm, edited 1 time in total.
-
navigatorbg
offline
- Joined: Sat Jul 12, 2014 11:22 am
- Posts: 8
- Has thanked: 3 times
- Been thanked: 0 time
Re: IGO 8 on Eonon GM5153
by nabi » Sat Jul 26, 2014 10:26 am
Where did you get that sys.txt ??
Back to the beginning. The working copy !! Not the one that gives error after error. Just one thing: in data.zip/ui_igo8 should be a 800_480 folder!
Rename the "save" folder to "saveold". Rename "sys.txt" to "sys.txt.old".
Open notepad, copy and paste these lines (it's my 8.3.5 sys.txt) in notepad, and save as "sys.txt".
Got it? Restart your device and see if it works.
If changes are needed, they can always be made. The old sys.txt could be a reference but a sys.txt should not be too long. The old save folder is only useful as a reference for some possible details to look up, however, if it's polluted with old information, that is originally from any device before yours, it's useless to keep it.
Back to the beginning. The working copy !! Not the one that gives error after error. Just one thing: in data.zip/ui_igo8 should be a 800_480 folder!
Rename the "save" folder to "saveold". Rename "sys.txt" to "sys.txt.old".
Open notepad, copy and paste these lines (it's my 8.3.5 sys.txt) in notepad, and save as "sys.txt".
Got it? Restart your device and see if it works.
If changes are needed, they can always be made. The old sys.txt could be a reference but a sys.txt should not be too long. The old save folder is only useful as a reference for some possible details to look up, however, if it's polluted with old information, that is originally from any device before yours, it's useless to keep it.
Re: IGO 8 on Eonon GM5153
by navigatorbg » Sat Jul 26, 2014 8:14 pm
Thanks nabi! The sys file is from the install in post 2 (filesupload100), I only changed the folder's path.
I followed your steps but got the following error when loading the application:
Failed to open file:
ui_igo8\960_544\loading.bmp
exiting application
I followed your steps but got the following error when loading the application:
Failed to open file:
ui_igo8\960_544\loading.bmp
exiting application
-
navigatorbg
offline
- Joined: Sat Jul 12, 2014 11:22 am
- Posts: 8
- Has thanked: 3 times
- Been thanked: 0 time
Re: IGO 8 on Eonon GM5153
by nabi » Sat Jul 26, 2014 9:28 pm
"Failed to open file: ui_igo8\960_544\loading.bmp"? This message is typical on some Windows CE6 devices - due to device typical Windows CE. We had it in the past and on some we did get iGO to work, on others we had to use another build. When I remember correctly a 8.3.4 or a Primo. Not sure about that, since it must be at least 3 years ago.
Let's try to tell the EONON what resolution to use . Make sure these lines are in sys.txt:
[rawdisplay]
screen_x=800
screen_y=480
stretch=1
And delete the save folder every time until iGO works!!
Let's try to tell the EONON what resolution to use . Make sure these lines are in sys.txt:
[rawdisplay]
screen_x=800
screen_y=480
stretch=1
And delete the save folder every time until iGO works!!
Re: IGO 8 on Eonon GM5153
by navigatorbg » Sat Jul 26, 2014 10:27 pm
it didn't load at all - just a black screen :-(
-
navigatorbg
offline
- Joined: Sat Jul 12, 2014 11:22 am
- Posts: 8
- Has thanked: 3 times
- Been thanked: 0 time
Re: IGO 8 on Eonon GM5153
by nabi » Sun Jul 27, 2014 8:06 am
That is strange! This indicates a complete screen resolution error.
Comment out all lines that point to a resolution and delete the save folder. Let iGO find out the screen resolution itself. By the way, are you sure the data.zip/ui_igo8 contains the and 800_4800 folder?
If that doesn't help, I consider Primo2.0
Comment out all lines that point to a resolution and delete the save folder. Let iGO find out the screen resolution itself. By the way, are you sure the data.zip/ui_igo8 contains the and 800_4800 folder?
If that doesn't help, I consider Primo2.0
________________________________________________________________________
When I do good, no one remembers, when I do wrong, no one forgets.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
When I do good, no one remembers, when I do wrong, no one forgets.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
Re: IGO 8 on Eonon GM5153
by chas521 » Sun Jul 27, 2014 1:09 pm
EDIT4: There seems to be some confusion about the sys.txt entries to make when the resolution is 800_480 so I'm adding this for your information.
This is what is supposed to go into the sys.txt after removing any entry referring to 480_272:
[interface]
resolution_dir="800_480"
vga=0
[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
Don't forget to delete the save folder. If you're still having problems then I would try Primo 2.4 below.
Primo 2.4
program-data-zip-branding-zip-license-f83/english-only-primo-t15581.html#p128645
BTW, that's my sys.txt but what do I know?
This is what is supposed to go into the sys.txt after removing any entry referring to 480_272:
[interface]
resolution_dir="800_480"
vga=0
[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
Don't forget to delete the save folder. If you're still having problems then I would try Primo 2.4 below.
Primo 2.4
program-data-zip-branding-zip-license-f83/english-only-primo-t15581.html#p128645
BTW, that's my sys.txt but what do I know?
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!
Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!
Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
Re: IGO 8 on Eonon GM5153
by navigatorbg » Sun Jul 27, 2014 8:43 pm
Amended sys file as above and it works! Thanks guys! Now adding maps and will test on the road ;-)
P.S. chas521, as the sys file is yours I assume the file I downloaded and unzipped is also being used by you - I noticed that the Data folder is also unzipped and that ui_igo8 exists not only within the zipped folders. Is this how it should stay?
P.S. chas521, as the sys file is yours I assume the file I downloaded and unzipped is also being used by you - I noticed that the Data folder is also unzipped and that ui_igo8 exists not only within the zipped folders. Is this how it should stay?
-
navigatorbg
offline
- Joined: Sat Jul 12, 2014 11:22 am
- Posts: 8
- Has thanked: 3 times
- Been thanked: 0 time
20 posts
• Page 1 of 2 • 1, 2
Return to General Discussions about iGO core
-
- Related topics
- Replies
- Views
- Last post
-
- Eonon GM5163 GPS MAP help
by chikamlam0010 » Thu Oct 23, 2014 10:12 am - 2 Replies
- 2590 Views
- Last post by zdaa33
Sun Jul 12, 2020 6:57 pm
- Eonon GM5163 GPS MAP help
-
- eonon e1025
by nckfrs » Tue Feb 19, 2013 5:49 pm - 3 Replies
- 2452 Views
- Last post by nabi
Tue Feb 19, 2013 6:41 pm
- eonon e1025
-
- Eonon G2440
by mthurston » Thu Jun 27, 2013 3:25 am - 3 Replies
- 2378 Views
- Last post by chas521
Thu Jun 27, 2013 9:11 pm
- Eonon G2440
-
- IGO Primo Eonon D5150V
by maxmansson » Thu Jul 09, 2015 9:45 pm - 3 Replies
- 2222 Views
- Last post by katastrofe
Fri Jul 10, 2015 5:24 pm
- IGO Primo Eonon D5150V
-
- igo help for eonon d5151 unit
by shaunUK26 » Mon Jul 28, 2014 7:39 am - 10 Replies
- 2318 Views
- Last post by shaunUK26
Wed Jul 30, 2014 3:18 pm
- igo help for eonon d5151 unit
Who is online
Users browsing this forum: No registered users and 8 guests
News
Site map
SitemapIndex
RSS Feed
