igo primo problems   

igo primo problems

Postby gerrayne » Sat Jun 09, 2012 5:15 am

hi guys i have a china gps with these specs and i have problem running igo primo
im from australia can someone teach me im having some memory problem4328
Operating System
Windows CE 6.0
GPS Processor
SiRF Atlas IV
Main Frequency
533MHZ
Store Space
128MB
Voice Guidance Cruise
Yes
GPS Antenna
1 GPS antenna interface on the back
GPS Dual Zone
Yes,you can enjoy music and radio while navigation
System
Form Factor
In-Dash
Enclosure Type
2 Din
Security Features
Panel-Mount For Security and Convenience
Features
Built-in Bluetooth
gerrayne offline


Junior Member



 
Joined: Fri Jun 08, 2012 12:22 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

Postby Yurbuh Tuggly » Sat Jun 09, 2012 5:56 am

Which version of Primo (and where did you get it from), and how much Program Memory (RAM...not "storage space") does your device have?

Has it always had such memory errors, or is this a new thing happening?

Oh, and Welcome to Navitotal, by the way!:grouphug:
But that's just my opinion..I could be wrong.
Y.T.
Primo2.4 PrimoAndroid TomTomAndroid
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

igo problems

Postby gerrayne » Sat Jun 09, 2012 6:00 am

hi i managed to solve it just need to figure away for the voice to work as when i was starting up primo2.0 it says voice something cant remember what it said im trying to work it out
gerrayne offline


Junior Member



 
Joined: Fri Jun 08, 2012 12:22 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

Postby Yurbuh Tuggly » Sat Jun 09, 2012 6:03 am

Will stand by for help...what kind of voice (TTS?), and is it an error that you are getting?
But that's just my opinion..I could be wrong.
Y.T.
Primo2.4 PrimoAndroid TomTomAndroid
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby gerrayne » Sat Jun 09, 2012 6:05 am

im getting an error while primo is loading up im rearranging the tts voice folder into the content folder and have a go at it again and see how it goes
gerrayne offline


Junior Member



 
Joined: Fri Jun 08, 2012 12:22 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

igo primo problems

Postby gerrayne » Sat Jun 09, 2012 7:46 am

hi there i got the same problem again i cant seem to load primo again getting the same error msg

was working awhile ago and now it cant can someone help
gerrayne offline


Junior Member



 
Joined: Fri Jun 08, 2012 12:22 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

Postby Yurbuh Tuggly » Sat Jun 09, 2012 7:46 am

The TTS VOICE files (not unzipped) go in ../content/voice.
The TTS ENGINE folder (such as tts_nua_v5) goes in the root of the Primo folder.
But that's just my opinion..I could be wrong.
Y.T.
Primo2.4 PrimoAndroid TomTomAndroid
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby gerrayne » Sat Jun 09, 2012 7:52 am

do u have msn or something i can talk to u on? just now i tried to do it but the card lost all the files and i cant remember what i did to get rid of the out of memory thing sigh this is really frustrating
gerrayne offline


Junior Member



 
Joined: Fri Jun 08, 2012 12:22 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

Postby Yurbuh Tuggly » Sat Jun 09, 2012 7:58 am

gerrayne wrote:do u have msn or something i can talk to u on

no.
gerrayne wrote:i cant remember what i did to get rid of the out of memory thing


Could be a few things:
1) You have a bad SD Card..try formatting and re-copying files.
2) Your device does not have at LEAST 64MB RAM...128 is preferred for Primo.
3) You have a flawed version of Primo...for a good one, click the Primo icon in my signature.
But that's just my opinion..I could be wrong.
Y.T.
Primo2.4 PrimoAndroid TomTomAndroid
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby gerrayne » Sat Jun 09, 2012 8:03 am

thats the one i downloaded from ur thread i did reformat the card the thing is it was working just now after i did some rearragements and added some empty folders to it than it worked but now as soon the card lost its memory and i put the files back in again it wont work. so initially it was working means i have 128 right ? or can where can i check to see how much memory i have ?
gerrayne offline


Junior Member



 
Joined: Fri Jun 08, 2012 12:22 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

Postby Yurbuh Tuggly » Sat Jun 09, 2012 8:17 am

gerrayne wrote:so initially it was working means i have 128 right

Not necessarily. Often times Primo will start on a low-memory device, but then quickly run out of working memory and error out or freeze.

gerrayne wrote:where can i check to see how much memory i have ?

See if you can manage to run this on your device:
:link:


gerrayne wrote:thats the one i downloaded from ur thread

Good. For most devices, that is one of the most trouble-free installs for Primo2 as long as the instructions are followed. Of course, every device is different, and yours may require some tweaking.
But that's just my opinion..I could be wrong.
Y.T.
Primo2.4 PrimoAndroid TomTomAndroid
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby Yurbuh Tuggly » Sat Jun 09, 2012 8:20 am

OH and PS...do you know the Screen Resolution for your device...or do you have a link to it for the specifications?
But that's just my opinion..I could be wrong.
Y.T.
Primo2.4 PrimoAndroid TomTomAndroid
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby gerrayne » Sat Jun 09, 2012 8:30 am

i have use the program to check it i have 119mb and the screen is 800x480 sigh this is frustrating was working a moment ago i tried to set it up and all and it was fine and it didnt go on error or anything so i guess i have the 128
gerrayne offline


Junior Member



 
Joined: Fri Jun 08, 2012 12:22 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

Postby Yurbuh Tuggly » Sat Jun 09, 2012 10:07 am

gerrayne wrote:119mb

Yes, that would indicate a total of 128MB available...plenty for Primo2 with all options.
gerrayne wrote:800x480

That's OK too.

I would say only a couple possibilities left:
You have some folders/files in the wrong places, your SD Card is behaving erratic..try a totally different card if possible, or there is some inherent issue or conflict with the device itself (like something big running in the background using a big chunk of memory).
But that's just my opinion..I could be wrong.
Y.T.
Primo2.4 PrimoAndroid TomTomAndroid
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby gerrayne » Sat Jun 09, 2012 10:12 am

i think its the way i put the files and folders can u teach me how to do it ?
gerrayne offline


Junior Member



 
Joined: Fri Jun 08, 2012 12:22 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

Next

Return to General Discussions about iGO core

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 19 guests