IGO reboots with *.hsp files

elfman wrote:So it has the same specifications than mine.And everything is working correctly for you.

What content do you have on it (tts,3d,skin etc ...)?

the size of the hsp i have is 1*671*137 (France_UNAV_60_2012.06_120612.hsp), maybe someone can tell me if it's good or not.

Everything!

Just download it again and try.

Just downloaded and installed France_UNAV_60_2012.07_120717.hsp (thanks to bam-bam) and guess what

The device reboots.

Added

in [debug]

hsp=1
show_hsp=1

doesn't show in crash.txt.

I'm running out of ideas
Will try with a skin or maybe a minimal sys.txt

My sys.txt from the M400...

[debug]
skip_eula=1
experimental_features=1

[gps]
Port=2
Baud=4800

[interface]
show_exit=1
extra_settings=1
show_programs=1
shutdown_time=0

[other]
demo_enabled=0

[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max =10
backlight_min = 0
backlight_reverse = 0
backlight_methods = 39
backlight_events = 1
battery_warning_limit=20
battery_warning_repetition=1
skip_resume_process=1
skip_suspend_process=1
powermgm_state="0"

[route.histspeed]
enabled=1
show=1
use_timeslice=1

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1
csv_voice_enabled=1

[speedcam]
enable_at_startup=1

[tts]
automatic_direction_conversion=1
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="VERY_HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[vr]
disabled=1

[warning]
warn_distances=130:800,110:600,90:400,60:200,40:150
speedcam_max_lookahead=1000

Your [tts] file is interesting

here is my sys.txt, maybe you'll see something :

[debug]
skip_eula=1
experimental_features=1
hnr=1
show_hnr=1
hsp=1
show_hsp=1

[gps]
Port=2
Baud=4800

[interface]
show_exit=1
extra_settings=1
show_programs=1
shutdown_time=0

[other]
demo_enabled=0

[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max =10 ; Swap 10 with 75 on Navman S series!
backlight_min = 0
backlight_reverse = 0
backlight_methods = 39
backlight_events = 1
battery_warning_limit=20
battery_warning_repetition=1
skip_resume_process=1
skip_suspend_process=1
powermgm_state="0"

[route]
hnr=1

[route.histspeed]
enabled=1
show=1
use_timeslice=1

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1
manœuvrer_chimes=1
csv_voice_enabled=1

[speedcam]
enable_at_startup=1

[vr]
disabled=1

[warning]
warn_distances=130:800,110:600,90:400,60:200,40:150
speedcam_max_lookahead=1000
speedcam_warning=1
speedlimit_warning_visual=1
speedlimit_warning_voice=1
speedlimit_warning=1
speak_tts_only=1
is_spoken=1

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Attention radar fixe."

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Attention radar mobile."

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Attention! radar de vitesse moyenne."

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Attention! Radar de feux tricolore."

[speedcam_category:6]
activated_spoken_type=speech
activated_speech="Attention! Passage à niveaux."

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Attention! Zone dangereuse."

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Zone scolaire, ralentissez."

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Attention! Radar de feux rouge et de vitesse."

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Ralentissez, péage."

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Sortie d'ambulance, ralentissez."

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Sortie de Pompier, ralentissez."


While posting my sys.txt, i saw the double entry "hnr=1"

Just removed it but it's not better.

Make a copy of the sys.txt and the save folder from your primo installation onto your PC and then delete the save folder, then open the sys.txt and delete everything from it and copy/paste mine into it, start primo and go through the set up and see if it works now.

Sometimes you just need to start again...

It didn't worked.The device reboots.

OK, Worth a go, restore the save folder and your sys.txt.

I just downloaded said file and tried it on my device and it's ok for me, So let's go back to the beginning...

How did you unlock the device?
Where did you get your copy of Primo?
What other content do you have installed?
Is there any error message/sound effect when it reboots?

1) i unlocked he device with your method http://www.navitotal.com/showthread.php?8169-Run-iGO-Primo-1.2-on-Mio-Moov-and-Navman-S-series-(and-some-F-series)-in-ten-steps.
But before that i unlocked the device with miopocket 4 which caused me several problems

2)Then i gt the copy of primo in your tuto

3)I have
in primo2
MAP :France_R3_NQ_2012.Q1_120522.fbl & France_R3_NQ_2012.Q1_120522.fda

tts_nua_v5 : with some folders like phoneme etc ...

in primo2/CONTENT :
BUILDING : France_NQ_2012.Q1_120530.3dc

dem : France_MCO_83_TA_071001.dem

POI : France_NQ_2012.Q1_120410.poi

SPEEDCAM : speedcam.spdb & speedcams.txt & SpeedcamUpdates.spud

tmc : France-ViaMichelin.tmc & France-V-Trafic.tmc

VOICE : Voice_TTS-nua-fra-f1-lua-dri40-vssq5f22.zip & Voice_TTS-nua-fra-m1-lua-dri40-vssq5f22.SEB.dddd31 Belgium V6.1.zip & Voice_TTS-nua-fra-m1-lua-dri40-vssq5f22.SEB.dddd31 V6.1.zip & Voice_TTS-nua-fra-m1-lua-dri40-vssq5f22.zip

vr_vde : _MON_040c_FRF_Nuance.vn1

All these files are the ones i added myself, the rest comes with the default install of primo

That version of Primo was taken straight from my device (Mio M400) with the content, save folder and tts engine+voices removed.

This leads me to think it could be a memory issue, Try removing the .dem and .3dc files and then try again with the .hsp file.

Ok here is what i've done.

1) put the dvd of miomore on my pc then found the mio_tata_400a_leopard_setup.exe

2) as soon as my device is found, i deleted everything in my device then pushed the "next" button

3) It installed me a very minimalistic mio software on the device (no languages, no map, no everything, so that when i turn on the device, it stays on language screen selection, whithout a choice because there is none.

4) unlocked the device with Fatboyfun method

5) copy primo folder whith just 1 map

6) ran igo primo, worked fine whithout nothing but a map

7) copy of the HSP file

Guess what ........ This Fu***** device REBOOTS !!!!
I really can't find where the problem is, except that hsp files are making me crazy

So that to say that it's not 3d or dem files but maybe the Map is the problem ?

At this point I'm thinking corrupted file, the version I downloaded yesterday which worked for me was posted by Yurbuh Tuggly.

Tried France_UNAV_60_2012.06_120612.hsp from Yurbuh Tuggly and France_UNAV_60_2012.07_120717.hsp from bam-bam
Same results.

Will try to redownload everything.

If you re-download everything and it still doesn't work, I don't know what to try next.

Stupid questions, but I don't remember reading the answers anywhere.
What licenses are in the license folder?
Before you you retry, did you delete the save folder every time? If not, do it.
Is there an error message of any kind?
Is there a way of telling what process is busy when the reboot happens? (I am not familiar with Primo, but iGO8 does say what it is doing at the start screen bottom right)
Did you try with a real minimal content? I mean only voice and 1 map, nothing else. This works? Then add hsp file? does this work or crash?

nabi wrote:Did you try with a real minimal content? I mean only voice and 1 map, nothing else. This works?

Yes

nabi wrote:Then add hsp file? does this work or crash?

It crashes

I will answer the other questions this afternoon, i don't the device with me at this moment, but the question about LICENCES is interesting.