HI

everything is said,

As soon as i put an .hsp files in /content/histSpeed, IGO reboots on any clic.

What can i do ?

I saw that it might be a LICENCE problem, but i really don't know how to solve this problem.

Thanks in advance for your answers.

A histspeed file ends in .hsp (United_Kingdom_83_NQ_60_2010.Q1_100702.hsp)

Are you sure you have the right file..?

Yes, sorry for that.

It's HSP files.
However, this morning it's working fine with them.

Don't know what happened.

elfman wrote:Don't know what happened.

Sometimes when changing content, it can take a couple start-ups before everything is registered correctly (and recorded in the Save folder).
No real pattern to it....it just happens occasionally on certain devices.

OK,

Unfortunately, at noon, after choosing a POI, the problem appeared again.
I'm running France_UNAV_60_2012.06_120612.hsp

[spoiler]
------------------------------------------------------
------------------------------------------------------
------------------ Crash Log Begin -------------------


Current System time: "2012-08-22 11:51:32"
Build version: 9.6.5.211211
Build configuration: Product--ARCHFAM
OS version: 5.0

Uptime: 0 h 0 m 24 sec 0 msec

Memory Stats:

FreeMemory: 13 MB, 752 KB, 0 B
TotalUseableMemory: 38 MB, 80 KB, 0 B
MaxMemory: 129 MB, 0 KB, 0 B
ReservedMemory: 1 MB, 0 KB, 0 B
ActualCacheSize: 9 MB, 522 KB, 828 B
GarbageSize: 8 MB, 874 KB, 978 B


Exception: 0xc0000094
At address: 0x01fb1e50
0x01fb1e50 (A)


WinCE CallStack snapshot (function names unknown - map file \My Flash Disk\Primo2\Primo2.map not found):

0x12012054 (A)
0x1201162c (A)
0x120117dc (A)
0x120118c4 (A)
0x1265048c (A)
0x13f8cc84 (A)
0x13f93914 (A)
0x8c0122b4 (A)
0x8c03bf8c (A)
0x8c0160d8 (A)
0x8c0121cc (A)
0x13fb1e50 (A)
0x12192518 (A)
0x121ad500 (A)
0x121ad360 (A)
0x12192c28 (A)
0x1212bb04 (A)
0x1212ad6c (A)
0x1212ade8 (A)
0x1212ae54 (A)
0x1210adb8 (A)
0x1206da0c (A)
0x12071950 (A)
0x12726f2c (A)
0x1204fd48 (A)
0x12050b54 (A)
0x12780f14 (A)
0x127990e0 (A)
0x1283c4b0 (A)
0x1283bb60 (A)
0x124ce54c (A)
0x125c8b68 (A)
0x125c7ab8 (A)
0x125c7624 (A)
0x125c9d80 (A)
0x125cacf4 (A)
0x1265022c (A)
0x12650440 (A)
0x1204ce68 (A)
0x13f6dd7c (A)


Global status:

bInFocus: 1
bMouseDown: 0
bInLogic: 1
bInRender: 0
CurrentState[128]: st_EasyRouteMenu
GPS Pos: (6.818032,47.514832)
Camera: pos:(6.821243,47.514897) rot:0 persp:0 zoom:327.000000 eng=0)


State queue:

0. st_MainMenu
1. st_MyRouteMenu
2. st_EasyRouteMenu


Waypoints:

0. roadpos:(6.817813,47.515640) realpos:(6.817813,47.515640) Name:Route sans nom, Montbéliard
1. roadpos:(6.825896,47.513185) realpos:(6.825901,47.513179) Name:52, Avenue Du Général Leclerc Sochaux


Route Parameters:

Vehicle type: Car
Planning method: Fastest
User pref. mask: 0x2EDE
Correctness: 88
User u-turn penalty: 3000


Maps:

map\Basemap.fbl ver:0x02d6 time:0x4b277198 cid:536362529
map\Basemap.fbl ver:0x02d6 time:0x4b277198 cid:536370721
map\Basemap.fbl ver:0x02d6 time:0x4b277199 cid:536378913
map\Basemap.fbl ver:0x02d6 time:0x4b27719a cid:536387105
map\Basemap.fbl ver:0x02d6 time:0x4b27719b cid:536395297
map\Basemap.fbl ver:0x02d6 time:0x4b27719b cid:536403489
map\Basemap.fbl ver:0x02d6 time:0x4b27719c cid:536411681
map\Basemap.fbl ver:0x02d6 time:0x4b27719d cid:536419873
map\Basemap.fbl ver:0x02d6 time:0x4b2771a1 cid:536428065
map\Basemap.fbl ver:0x02d6 time:0x4b2771a2 cid:536436257
map\Basemap.fbl ver:0x02d6 time:0x4b2771a4 cid:536444449
map\Basemap.fbl ver:0x02d6 time:0x4b2771a5 cid:536452641
map\Basemap.fbl ver:0x02d6 time:0x4b2771a5 cid:536460833
map\Basemap.fbl ver:0x02d6 time:0x4b2771a6 cid:536469025
map\Basemap.fbl ver:0x02d6 time:0x4b2771a7 cid:536477217
map\Basemap.fbl ver:0x02d6 time:0x4b2771aa cid:536485409
map\Basemap.fbl ver:0x02d6 time:0x4b2771ab cid:536493601
map\Basemap.fbl ver:0x02d6 time:0x4b2771ac cid:536501793
map\Basemap.fbl ver:0x02d6 time:0x4b2771ac cid:536509985
map\Basemap.fbl ver:0x02d6 time:0x4b2771ad cid:536518177
map\Basemap.fbl ver:0x02d6 time:0x4b2771b1 cid:536526369
map\Basemap.fbl ver:0x02d6 time:0x4b2771b8 cid:536534561
map\Basemap.fbl ver:0x02d6 time:0x4b2771ba cid:536542753
map\Basemap.fbl ver:0x02d6 time:0x4b2771ba cid:536550945
map\Basemap.fbl ver:0x02d6 time:0x4b2771bb cid:536559137
map\Basemap.fbl ver:0x02d6 time:0x4b2771bb cid:536567329
map\Basemap.fbl ver:0x02d6 time:0x4b2771bc cid:536575521
map\Basemap.fbl ver:0x02d6 time:0x4b2771bd cid:536583713
map\Basemap.fbl ver:0x02d6 time:0x4b2771c1 cid:536591905
map\Basemap.fbl ver:0x02d6 time:0x4b2771c3 cid:536600097
map\Basemap.fbl ver:0x02d6 time:0x4b2771c4 cid:536608289
map\Basemap.fbl ver:0x02d6 time:0x4b2771c5 cid:536616481
map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf360 cid:7005245
map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf360 cid:7013437
map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf360 cid:7029821
map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf361 cid:7046205
map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbc152d cid:7078973
map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbc1d74 cid:7095357
map\France_R3_NQ_2012.Q1_120522.fbl ver:0x02ea time:0x4fbbf361 cid:7119933


HNR files:

map\Eastern Europe_NQ_Easy_2012.Q1_120619.hnr ver:0x007e time:0x4fe05ecf cid:1182794212
map\Eastern Europe_NQ_Economical_2012.Q1_120619.hnr ver:0x007e time:0x4fe05b86 cid:1182794213
map\Eastern Europe_NQ_Fast_2012.Q1_120619.hnr ver:0x007e time:0x4fe05553 cid:1182794214
map\Eastern Europe_NQ_Short_2012.Q1_120619.hnr ver:0x007e time:0x4fe05982 cid:1182794216


--------------------- LUA stack ----------------------


Lua stack[ 0] :
Lua stack[ 1] :
Lua stack[ 2] :
Lua stack[ 3] :
Lua stack[ 4] :
Lua stack[ 5] :
Lua stack[ 6] :
Lua stack[ 7] :
Lua stack[ 8] :
Lua stack[ 9] :
Lua stack[10] :
Lua stack[11] :
Lua stack[12] :
Lua stack[13] :
Lua stack[14] :

------------------- Crash Log End --------------------
------------------------------------------------------
------------------------------------------------------
[/spoiler]

maybe it's because i put hnr files for eastern Europe instaed of Western

And why is it looking for primo2.map?

elfman wrote:maybe it's because i put hnr files for eastern Europe instaed of Western

Probably not related. But you could remove any HNR files to see if it makes any difference.
By the way, in case you did not know: HNR files are totally ignored and not used unless ALL maps for the region are available to Primo.
For instance, if you have HNR files for Eastern Europe, you would also have to have every individual country map file for all of Eastern Europe also installed in your /map folder.

elfman wrote:And why is it looking for primo2.map?

Ignore that...it's a somewhat meaningless "General Error" that is a result of how the EXE was 'fixed' to work on most devices.

I must be missing something.
hnr files are historic route files, you have them for Eastern Europe but you have no Eastern Europe map in the map folder? Then they are useless. Besides, you need ALL Eastern Europe maps for this feature. (or all Western Europe maps with Western Europe hnr or ALL)
I see no hsp file? Where did you put it? HSP files go in Primo/Content/histspeed and I don't see it at all.

map file missing is a message not to worry about. It's a Primo internal message, only for programmers (of the official build). The message appearing means your build is not obtained the official way.

Additionally, I'm starting to think that maybe you have overloaded Primo 2 with content...for your device.
According to the specs I looked up, your Mio Spirit 470 has 64MB of RAM.
That is enough to run Primo 2, but only in a more minimal configuration (no TTS, 3D features reduced, etc).
For a Full Boatload of features, Primo 2 requires 128 MB Ram.

Yurbuh Tuggly wrote:By the way, in case you did not know: HNR files are totally ignored and not used unless ALL maps for the region are available to Primo.

NO, i didn't know that.

nabi wrote:I see no hsp file? Where did you put it? HSP files go in Primo/Content/histspeed and I don't see it at all.

I mentionned it a few posts before, i'm using France_UNAV_60_2012.06_120612.hsp in the correct folder.

Yurbuh Tuggly wrote:Additionally, I'm starting to think that maybe you have overloaded Primo 2 with content...for your device.
According to the specs I looked up, your Mio Spirit 470 has 64MB of RAM.
That is enough to run Primo 2, but only in a more minimal configuration (no TTS, 3D features reduced, etc).
For a Full Boatload of features, Primo 2 requires 128 MB Ram.

Yes I know, but i find IGO navigation really really good with all it's possibilities.

I'm using 3D, buildings and TTS voices, but i didn't had any problems before this one with HSP files.

I'm trying it without the hnr and wiil edit this post.

Thank you to both of you for your replies.

EDIT: No changes whitout hnr files (so you where right it's not related)
Too bad.
But Igo is so far better than miomaps !Even without HSP :-)

elfman wrote:I mentionned it a few posts before, i'm using France_UNAV_60_2012.06_120612.hsp in the correct folder.

Yep, I saw.
But in the crash log it is missing. And you started with this:

elfman wrote:As soon as i put an .hst files in /content/histSpeed, IGO reboots on any clic.

Thus when it's loaded, it should be in the crash.txt and it isn't, while all other map files (fbl) and hnr files are.
Now I wonder this. When you have a histSpeed folder, should it not be histspeed? (small 's')

Could it be a bad download of the hsp file?

elfman wrote:I'm using 3D, buildings and TTS voices, but i didn't had any problems before this one with HSP files.

Then you found the straw that breaks the camels back.
:D

nabi wrote:Yep, I saw.
But in the crash log it is missing. And you started with this:



Thus when it's loaded, it should be in the crash.txt and it isn't, while all other map files (fbl) and hnr files are.
Now I wonder this. When you have a histSpeed folder, should it not be histspeed? (small 's')

I was drunked when i wrote that :-)
the folder is wrote with a small 's'

But you are right the crash.txt don't mentionned it so FatBoy is probably right... it's maybe a bad download .... or maybe a faulty device who is saying "replace me with a better one" :-)

I have a Mio M400 and all the content works on it including histspeed

Fatboyfun wrote:I have a Mio M400 and all the content works on it including histspeed

So it has the same specifications than mine.And everything is working correctly for you.

What content do you have on it (tts,3d,skin etc ...)?

the size of the hsp i have is 1*671*137 (France_UNAV_60_2012.06_120612.hsp), maybe someone can tell me if it's good or not.