IGo8 on a 2Din In Car Entertainment System - Pleeeeese Help   

IGo8 on a 2Din In Car Entertainment System - Pleeeeese Help

Postby DreadManCandy » Sun Nov 20, 2011 12:36 am

Morning All.....

I am a newbie here so forgive me fro cross posting, repeating and all that:scratch_one-s_head_. One thing's for sure, I'm confident I will get the support and help here after reading a number of interesting posts.

Firstly, I'd like to say thanks to everyone on this site, it's truly interesting to read some of the postings and considering I've been unsuccessfully searching for help and advice for a while, I only stumbled upon this site yesterday.

Anyway, that was my intro, and to make a long story loooonger, here's my plea.

I purchased a double din in car entertainment system a year ago and the selling point to me was the fact that it came loaded with a GPS Programme. The product arrived and of course I was excited. Unfortunately, there was no SD Card or GPS App with it. By the way, this was the 1st time I heard about IGo8. I contacted thew chinese supplier and mentioned this to them and they apologised and suggested that I pay some more money in order for them to send me the SD CArd with the loaded app on it.

At this point, I felt I had spent enough on purchasing the product, paying for customs and for someone to fit it in my car so I told them to upload the app to their site and I'll download it.This never happended so anyway, I proceeded to learn about nav systems and apps and what works and what doesnt work.:helpsos:

However, I noticed on the packaging and in the emails that, tyhe mention of iGo Nav Software. To this end, I've been trying to get one to work on my system but it just wont load. I have followed numerous installation examples but I still cant get the damn thing to work on my system. The closest I got it working was on my Axim51V and the loading screen on my 2din system but with error codes and it crashes. Since last year, I have managed to download and huge collection of iGo navigation software, but I just cant seem to be able to get it gooooing.

Perhaps someone can help me or tutor me to make one of these work.

I like the look of the software especially on my PDA even though it crashes all the time, but I'm sure with the right configuration and set up and what not, I'll be able to get it going.

I really appreciate any responses, tutorials and links to working apps that I can get started with. I noticed there's a lot of postings and discussions, but I'm very confused as to where to start.:chok_mini:

By the way, my system runs on WinCE 5

Thanks in advance
DreadManCandy offline


Junior Member



 
Joined: Sat Nov 19, 2011 2:34 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Sun Nov 20, 2011 12:48 am

Did you get iGO to start at all? Even if all you got was an error message.

Also post the make/model number
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby DreadManCandy » Sun Nov 20, 2011 12:59 am

Morning Sir,

Thanks for your quick response.
Pheeew, I was on my way out, but I guess I'll stick around for a little bit longer.

And to answre your question, sometimes, I did get it to load the igo screen (bitmap) and then spits out an error. One of them was, cannot find language files, and the other errors were codes. And to be completely honest, I havn't clue, so I just turn the damn thing off, eject the sd card and ry another download, in the hope it might work. The latest one I tried was (iGO 8.3.4 Full Europe 2011) and that loaded an igo screen and crashed on me. Wish I could upload the whole folder, but I haven't got the facility.

Hope this responses helps and you're able to help.

Thanks
DreadManCandy offline


Junior Member



 
Joined: Sat Nov 19, 2011 2:34 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Sun Nov 20, 2011 1:55 am

This thread may be of help...

How to solve error messages

Also this one as well...

Double din GPS How to install
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby DreadManCandy » Sun Nov 20, 2011 9:56 pm

Hi Fatboyfun,

Thanks for the link.

Just wondering whether you or anyone could point me in the direction of the various downloads mentioned in the thread. I have done a test and figured out the storage name and resolution. The storage name is "StorageCard" and the Resolution is 800x480 as reported by resolution tester. I reckon, I will now need a copy of (2Din90500v1.rar) and (data_branding.rar for that resolution) as I'm starting from scratch and want to use a tried and tested setup.

I think the problem I'm having is to do with the system file (ie;sys.txt or device.ini)

If only I can figure those out or indeed whether I need them both. But I'm going to soldier on and hopefully, get this to work on my system.

Thanks in advance for any further suggestions, info or advice.

Bless up....!
DreadManCandy offline


Junior Member



 
Joined: Sat Nov 19, 2011 2:34 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby nabi » Sun Nov 20, 2011 10:24 pm

In my opinion, following the thread carefully or this one: http://www.navitotal.com/showthread.php?910-How-to-install-iGO8-from-scratch, any iGO non 2Din90500 build should end up in a working iGO.

Read the thread thoroughly and follow it. Do the resolution test !!! Most failures, or I should say all, had 3 reasons: wrong resolution, too little memory or user errors.
The download links to the 2Din90500 and other files are not in the open, but are in the attachment.
When you have problems, any at all, be precise and post the error message or the step iGO is in when freezing. Success!
________________________________________________________________________
When I do good, no one remembers, when I do wrong, no one forgets
.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
nabi offline


Ex Super Mod



 
Joined: Mon Dec 28, 2009 5:22 pm
Posts: 2429
Location: somewhere unknown
Has thanked: 39 times
Been thanked: 233 times

Postby DreadManCandy » Mon Nov 21, 2011 11:44 am

Hi Nabi,
Thanks for the above link.

I have thoroughly read the page contents and have a better understanding as to why iGO will and will not work.
I have followed the instructions and advice and I am confident I can get this working.

This is the result of my tests.

System running on WinCE 5.0
Memory Storage 58968kb
Available Memory 43404kb
Resolution 800x480 (using resolution tester)
SD Path is StorageCard

However, I tried one of the applications I downloaded from here and the error I got was
Program Application database cannot be found.

I believe I may have been using a PDA version.(I'm using a package I downloaded from here called HouseHold Hints.rar) Is this the one???

I now know I need a PNA Version. I would really appreciate it if you can point me in the right direction.
Also, what should my sys.txt file contain?

This is what is in the current sys.txt file.

[folders]
app="%StorageCard%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0


[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
defaulttilt3d=7600
vga=0
resolution_dir="800_480"


[map]
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0


[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80


[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street


[rawdisplay]
highres=0


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10


[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10


As you can see, I have modified the path and the resolution to fit my system and iGO.exe is in the IGO folder together with all the files and folders???

Am I doing something wrong? I think I'm sooooooo close.

Pleeeeeeease Help.

Thanks in Advance
DreadManCandy offline


Junior Member



 
Joined: Sat Nov 19, 2011 2:34 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Mon Nov 21, 2011 12:19 pm

Take another look at the how to solve error messages link above, also that sys.txt is a bit long, too many entries can lead to problems.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby chas521 » Mon Nov 21, 2011 12:35 pm

That sys.txt is mine from my program. It works 100%. Not too long and only touches upon what is necessary. If he is getting a database not found error, it's because it cannot find the correct path to the application. He must know what his SD card is called and make the name change. My program works fine with 2Din.
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1373 times

Postby nabi » Mon Nov 21, 2011 12:37 pm

I am not sure who uploaded household.rar and what build it is. By the date of the exe file (or in menu>about) you can find the build.
On http://www.navitotal.com/forumdisplay.php?83-Program-%28-data.zip-branding.zip-license%29 you will find all programs. Also there is a list of iGO8 releases on that page.
I do not have the time and possibility to check the links (I am at work ;-) ) but you will certainly find what you need, when you need another one.

The error message (application database not found) is connected to this line : app="%StorageCard%/iGO8". Check this : http://www.navitotal.com/showthread.php?914-How-to-solve-error-messages.
But it's quite possible that deleting (or better renaming sys.txt -> sys.old or likewise) will make iGO run. Try it.
The contents of your sys.txt is of not the most important to me now. Try to keep things simple, including contents. Add things one by one.
Your device has minimal - but enough - memory. First make things work.
________________________________________________________________________
When I do good, no one remembers, when I do wrong, no one forgets
.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
nabi offline


Ex Super Mod



 
Joined: Mon Dec 28, 2009 5:22 pm
Posts: 2429
Location: somewhere unknown
Has thanked: 39 times
Been thanked: 233 times

Postby Yurbuh Tuggly » Mon Nov 21, 2011 12:39 pm

DreadManCandy wrote:Program Application database cannot be found.


You could start by changing this:
[folders]
app="%StorageCard%/iGO8"


To this:
[folders]
app="/StorageCard/iGO8"


If that does not work, then try this:
;[folders]
;app="/StorageCard/iGO8"
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby chas521 » Mon Nov 21, 2011 12:43 pm

nabi wrote:I am not sure who uploaded household.rar and what build it is.


That is my program. I think I know what I'm doing.
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1373 times

Postby nabi » Mon Nov 21, 2011 12:45 pm

I could have known. Such a common title for a rar file.
________________________________________________________________________
When I do good, no one remembers, when I do wrong, no one forgets
.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
nabi offline


Ex Super Mod



 
Joined: Mon Dec 28, 2009 5:22 pm
Posts: 2429
Location: somewhere unknown
Has thanked: 39 times
Been thanked: 233 times

Postby chas521 » Mon Nov 21, 2011 12:47 pm

Had to use a simple name to protect it - I hope!
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1373 times

Postby chas521 » Mon Nov 21, 2011 1:41 pm

@DreadManCandy

Read this from post #10 http://www.navitotal.com/showthread.php?7708-Help!-Installing-iGO-8.3-Picture-goes-all-white-and-rolls!

EDIT: I see you said earlier that you modified the path. What did you do? You didn't have to do anything except change the resolution to your device.
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1373 times

Next

Return to General Discussions about iGO core

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 50 guests