mariop1 wrote:X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
1.5594400,42.5219400,1,60,[color="#FF0000"]0[/color],0

[color="#FF0000"]That[/color] is the "Direction Type"----currently set in the example to 'All Directions'.
If you change the 0 to 1, then the theory is that you would only get an alert based on the direction of the side of the street that the camera is located, in the direction of traffic.
For cameras located at an intersection, this is a bit more complicated to define direction.

mariop1 wrote:atnav shows a speedcam in some street with 100mile speed limits but i know that there are no speedcam there

Don't be so sure about that...your database may contain Mobile Cameras which show their last REPORTED position, but they can move (obviously), and be anywhere and hard to spot. Better to be alert in an area where known mobile cameras were....they could come back.

mariop1 wrote:a way to identify the uk speedcam

If you can roughly identify your areas by latitude and longitude (such as 1.5594400,42.5219400 in the example), then you can change only within that range if you want to go to the trouble.

1.5594400,42.5219400,1,60,0,0
1.5594400,42.5219400,1,60,1,0
now it is only one direction correct?

well it alert me in my road 100mlh but i know in my road never been a speedcam because it is a closed road.

mariop1 wrote:now it is only one direction correct?

As that example is, yes that would be correct.

mariop1 wrote:well it alert me in my road 100mlh but i know in my road never been a speedcam because it is a closed road.

Certainly, some downloadable databases can contain errors (too many speedcams or not enough). Not enough is worse, I think.
With some skins you can edit easily to remove or add speedcams directly on the Map View.

ok
thank you for the help. tomorrow i will try it out. one problem sorted. now the other problem is to edit kukker skin 3.2 to add a car cursor.
thanks again for the help

This will allow you to have a "3d" car in iGo8x with no skin, or with any skin.....but only one, no choices nor changing it within the program.
Download:
[Please Register or Login to download file]

3.2MB, no password

Extract RAR file on your PC.
Choose ONE car folder from the choices (sorry, no preview or ability to see it before you add it).
Open that {car} folder of your choice and copy the gfx folder to the root of your igo8 install on your device or SD Card so the folder is like this:
{main iGo8 folder}
>branding.zip
>data.zip
>sys.txt
>content (folder)
>license (folder)
>gfx (folder)
>(any other folders or files)

Open your existing sys.txt and add this:

[Map]
3D_scale_carmodel=1
3Dcarsizemin=7000
3Dcarsizemax=8000

You can adjust the size numbers later, if you choose.
Save sys.txt.

Start iGo8 on your device, go to map view, and you should see your chosen car.
To change to some other car, delete the folder gfx under iGo8 and copy over another gfx folder from another car folder in the download.

PS; and no, I will not make you (or anybody else) any additional car choices. If you don't like the selections, find some more somewhere else.


[color="#FF0000"]I hope this answer is "good enough" for you.[/color]

hi
thanks for the help.
the sppedcam works ok now with the modification thank you again.

Regarding The 3D cars: the car shows up when i turn the device on but when the gps lock on the car disappears. if im under a tunnels and the gps signal goes the car appeares again then disappear when the gps lock on. also i tried in Simulate and Fly over but the car does not show up. I added the lines under map in the sys file as you said.
thanks

Are you sure, as in POSITIVE, that you have the map set in 3D View (not 2D)?

3D enhancements will not show in 2D mode.

If you are sure that you are always in 3D mode, then something is wrong with your install, or other entries in your sys.txt.

yes im positive because when i switch to 2D the car disappers then if i switch back to 3D the car appears but as i said only when the gps if off. i sent you a pm with the sys file please if you can look at it.
thanks

I am not the iGo8x expert around here.....I don't even USE the program except to occasionally test things for people using an emulator.
You want nabi, Chas521, or Fatboyfun to try to figure out why 3D things disappear when you get a GPS lock.
For them, I am posting your sys.txt below if they want to try to figure it out for you:
[SPOILER=sys.txt][folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0


[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
defaulttilt3d=7600
vga=0
resolution_dir="320_240"


[map]
3D_scale_carmodel=1
3Dcarsizemin=7000
3Dcarsizemax=8000
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1


[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0


[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80


[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street


[rawdisplay]
highres=0


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10


[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10 [/spoiler]

I read elsewhere that perhaps you are using an iGo8 installation from somewhere else now (not the one from Chas521). If that is the case, he may not want to take the time to try to fix what somebody else may have done, or not done.

still use the one from from Chas521. because the other one is a bit slow for my divice.
thank you very much for all your help.

From a quick glance you have two [map] sections in your sys.txt

Combine them both into one and check for more double entries...

You also may want to delete your save folder and re-do the options. The absolute worst thing you can do is to go from forum to forum and add/delete or even create something new because then we have NO idea what you have or what might be causing a conflict of sorts. I have said this a few times now. Stay with Navitotal because we offer the best support. If we cannot help THEN WE will point you elsewhere.

hi
Navitotal is the forum for me and thanks for all the help.

I did what you have suggested also deleted the save folder but still the car does disappears when the gps locks on and also if i do a simulete or fly over without gps the car still disapperas.

Did you do what Fatboyfun suggested in post #26? There appear to be two similar entries. Delete either/or but write down the numbers.

[map]
3D_scale_carmodel=1
3Dcarsizemin=7000
3Dcarsizemax=8000
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1


[map]
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000

I Did what Fatboyfun suggested in post #26 but did not work, also i did what you suggested. deleted the map entry but still the same when gps locks the car disappears,