Ive chinese 2 din gps problem

HI GUYS I'M NEWBIE TO GPS I BOUGHT 2 DIN CHINESE GPS I'M NOT ABLE TO INSTALL IGO APPLICATION ON IT IVE DOWNLOAD MANY VERSION BUT NO LUCK FOR ME PLEASE HELP ME.

GPS DETAILS:

Resulution 480 by 800
port: com1
Baud: 9600
protocol: NMEA

I ALSO CANNOT ACCESS WINCE THINK COMPANY HAS LOCKED PLS HELP HELP WITH SOLUTION.
57545755

What have you done?

i've tried igo 8 it says copy 2577 and igo folder on sd card but it crashes. what should i do

coolguy_munir wrote:i've tried igo 8 it says copy 2577 and igo folder on sd card but it crashes. what should i do

Where did you get the iGO8 program?

i download from torrent

A 2577 folder suggests an older PDA build.

Why not try this one...

http://www.navitotal.com/showthread.php?6880-Igo8-March-16-2011

i'll give it a try

Bro i tried your build and program launched when it load main screen it crashes quickly. i've also ediited sys.txt as u told in ur thread. but no luck pls tell me wht to do now

Post your sys.txt. Was there an error message?

[folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0


[interface]
resolution_dir="800_480"
vga=0

[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"


[map]
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemul=10000
3dcarsizemin=7000
3dcarsizemax=8000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0


[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80


[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street


[rawdisplay]
highres=0


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10


[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10





This is sys file check above . I've followed these steps after copying to sd card.
1. Delete the TTS_LOQ folder 2. There are 5.dlls. You're gonna delete 4 of them but not gpstmc.dll 3. Delete all the TTS voices from content\voice leaving only the non-TTS voices 4. Include your content to the appropriate content folders 5. Delete all dem and building files from your content 5. Reduce the area or delete the speedcam files 6. Reduce the map area.
5770

[folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0


[interface]
resolution_dir="800_480"
vga=0

[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"


[map]
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemul=10000
3dcarsizemin=7000
3dcarsizemax=8000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0


[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80


[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street


[rawdisplay]
highres=0


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10


[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10





This is sys file check above i tried your build again now im receiving application database error. I've followed these steps after copying to sd card.
1. Delete the TTS_LOQ folder 2. There are 5.dlls. You're gonna delete 4 of them but not gpstmc.dll 3. Delete all the TTS voices from content\voice leaving only the non-TTS voices 4. Include your content to the appropriate content folders 5. Delete all dem and building files from your content 5. Reduce the area or delete the speedcam files 6. Reduce the map area.

Application database not found error means that your device cannot find the correct path to the program's .exe. Actually this is an easy error to fix. If there is a menu on your device that has an icon for the settings then change the path to the SD card. Also if your device has 64Mb or greater RAM memory, you can use the full program and there is no need to minimize. Just make sure you keep the content to a small area and not the whole world.

Also change...

[folders]
app="%SDCARD%/iGO8"

To...

;[folders]
;app="%SDCARD%/iGO8"

Delete the save folder and try again.

it was my mistake i directly copied all files to the root of card. now i receiving this error AND PROGRAM CRASHES
5771

You're getting a data.zip error. Did you delete the save folder as you were instructed to? How exactly did you set up iGO8? Try with and without the ;.

Are you using MY iGO8 or someone elses? That blue picture is NOT my loading.bmp.