Primo   

Postby Yurbuh Tuggly » Fri Dec 02, 2011 3:22 pm

navguy wrote:What about the GPS setup, is that automatic or do i have to set it up ?


As Chas521 said above, go outside and see.
In that particular Primo 1.2 package, there is NO setting for [GPS] in sys.txt, because that version is usually pretty good at figuring things out on it's own. Maybe not for all devices, but for most.
If, after 15-20 minutes (sometimes longer) of clear view outside no satellites are yet picked up, you may need to add in the [GPS] section in sys.txt the exact same way it is in your iGo8 install. Note: not all of sys.txt from iGo8, just the [GPS] section.
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby navguy » Sat Dec 03, 2011 1:34 am

i`m gonna try the Histspeed files and see what happens.

Are there different ones for different countries or the same for around the world ?

I found this one Histspeed files for iGOPrimo SMART ROUTE.

Do i have to add settings to my sys.txt for the speedcam to work, the off button or other things ?

[debug]
skip_eula=1
experimental_features=1

[interface]
show_exit=1
extra_settings=1
show_programs=1

[other]
demo_enabled=0

[vr]
disabled=1
navguy offline


User avatar Junior Member



 
Joined: Wed Nov 30, 2011 11:50 am
Posts: 70
Location: Australia
Has thanked: 0 time
Been thanked: 0 time

Postby zervdim » Sat Dec 03, 2011 6:59 am

I make a thread for igo Primo smart route- Hitspeed here:
http://www.navitotal.com/forums/showthread.php?7970-Histspeed-files-for-iGOPrimo-SMART-ROUTE

You must add the following to your sys.txt:
[route.histspeed]
enabled=1
show=1
use_timeslice=1

[route.histspeed.timeslice]
day=1
hour=8
minute=1


If you don't see the exit button then you must add to sys.txt:

[interface]
show_exit=1

If you like to listen the speedcam warning and the street names announced then you can add TTS Pro Nuance , you can get it here at navitotal:
http://www.navitotal.com/forums/showthread.php?6962-iGO-Primo-1.2-Nuance-TTS-Pro-Voices

Or if you like to listen loquendo TTS Pro voices you can get it here at navitotal :
http://www.navitotal.com/forums/showthread.php?7791-iGO-Primo1.2-TTS-Pro-loquendo-voices
But you must add the following to your sys.txt:
[sound]
csv_voice_enabled=1

[warning]
speedlimit_warning_visual=1
speedcam_warning=1
is_spoken=1
speedcam_max_lookahead=2000
speedcam_maxdistance_from_road=10

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Caution speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Caution mobile speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Caution traffic light camera"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,50:500,40:200,20:100"

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Caution average speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Caution traffic light ahead"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,20:500"

[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Caution bus lane camera ahead"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,20:500"

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Caution dangerous railway crossing"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Caution scholl zone ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Caution town entry point"
;overspeed_spoken_type=1
warn_distances="0:2000"

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Intimidation radar"

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Caution toll ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Caution hospital"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Caution fire Station ahead"

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Change taxi zone"

[speedcam_category:16]
activated_spoken_type=speech
activated_speech="Caution give way"
;overspeed_spoken_type=1
warn_distances="0:200"

[speedcam_category:17]
activated_spoken_type=speech
activated_speech="Caution dangerous crossing"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:18]
activated_spoken_type=speech
activated_speech="Caution speed breaker"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:19]
activated_spoken_type=speech
activated_speech="Caution Children ahead"
;overspeed_spoken_type=1
warn_distances="0:100"

[speedcam_category:20]
activated_spoken_type=speech
activated_speech="Caution dangerous Turn"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:21]
activated_spoken_type=speech
activated_speech="Caution tunnel ahead open your lights"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:22]
activated_spoken_type=speech
activated_speech="Caution dangerous road ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:23]
activated_spoken_type=speech
activated_speech="Police department"

[speedcam_category:24]
activated_spoken_type=speech
activated_speech="Caution dangerous area"
;overspeed_spoken_type=1
warn_distances="0:800"

[speedcam_category:25]
activated_spoken_type=speech
activated_speech="Caution black spot"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:26]
activated_spoken_type=speech
activated_speech="Caution closed road"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:27]
activated_spoken_type=speech
activated_speech="Caution congestion ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:28]
activated_spoken_type=speech
activated_speech="Caution constriction ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:29]
activated_spoken_type=speech
activated_speech="Caution low visibility ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:30]
activated_spoken_type=speech
activated_speech="Caution low bridge ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Caution dangerous point"
;overspeed_spoken_type=1
warn_distances="0:500"

Futhermore you must add the following to your sys.txt in order TTS could be more efficience;

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[sound]
maneuver_chimes=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
sound_q_length=200
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=1400

[route]
guidance_at_highway_entry=1

I don't know your country but if you don't here well the announced of the speedcameras then you should go to :
Primo/content/voice/nameofvoice

Pick the nameofvoice open it with winrar(do not extract it) and then go the file dictionary.voice open it with a notpad and copy this
Caution speed camera ahead="in your language Caution speed camera ahead"
Caution mobile speed camera ahead="in your language Caution mobile speed camera ahead"
etc, etc.

Give a try.
zervdim offline


User avatar Junior Member



 
Joined: Sat Apr 30, 2011 6:41 pm
Posts: 36
Has thanked: 0 time
Been thanked: 4 times

Postby navguy » Sat Dec 03, 2011 7:28 am

Cheers zervdim
navguy offline


User avatar Junior Member



 
Joined: Wed Nov 30, 2011 11:50 am
Posts: 70
Location: Australia
Has thanked: 0 time
Been thanked: 0 time

Postby zervdim » Sat Dec 03, 2011 7:38 am

I don't have hitspeed file for Australia in my post. Sorry!!!!
zervdim offline


User avatar Junior Member



 
Joined: Sat Apr 30, 2011 6:41 pm
Posts: 36
Has thanked: 0 time
Been thanked: 4 times

Postby bazzle » Sat Dec 03, 2011 6:39 pm

I dont think they exist for Oz... yet.

navguy... go to bed and try it all out tomorrow.

Bazzle
bazzle offline


User avatar Senior Member



 
Joined: Thu May 20, 2010 2:08 am
Posts: 269
Has thanked: 2 times
Been thanked: 5 times

Postby navguy » Sun Dec 04, 2011 1:02 am

bazzle,

i`m still trying to work out these speedcam warnings for Primo and iGO8.

Thought i had iGO8 working properly but my warnings are not working.

In the sys.txt of both iGO8 & Primo would this work.

[sound]
ding=1

[warning]
speedcam_enabled=1
speedcam_warning=1
Navman S50 with iGO8 and iGO Primo on one 4GB sd card.
navguy offline


User avatar Junior Member



 
Joined: Wed Nov 30, 2011 11:50 am
Posts: 70
Location: Australia
Has thanked: 0 time
Been thanked: 0 time

Postby bazzle » Sun Dec 04, 2011 1:40 am

It may but no entry is required. You enable in settings in the program afaik..

Bazzle
bazzle offline


User avatar Senior Member



 
Joined: Thu May 20, 2010 2:08 am
Posts: 269
Has thanked: 2 times
Been thanked: 5 times

Postby chas521 » Sun Dec 04, 2011 4:21 am

This is my Primo sys.txt. Warnings work fine with audio.

[folders]
has_secondary_root=0

[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=10

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0


[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80


[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 balloon =1 in street


[rawdisplay]
highres=0


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1370 times

Postby navguy » Sun Dec 04, 2011 4:35 am

Would mine work if i copy your speedcam warning text ? and do i need to download any sound files.

[sound]
ding=1 ;=0 no ding
queue_length=200

[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10
Navman S50 with iGO8 and iGO Primo on one 4GB sd card.
navguy offline


User avatar Junior Member



 
Joined: Wed Nov 30, 2011 11:50 am
Posts: 70
Location: Australia
Has thanked: 0 time
Been thanked: 0 time

Postby chas521 » Sun Dec 04, 2011 4:45 am

Back-up your sys.txt and delete from your SD card. Copy and paste mine to your SD card and see. Mine works 100%, so should yours. BTW, did you notice that I have all my navs on one SD card? Also, I have a partial Australian speedcam .txt file. Do you want it?
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1370 times

Postby chas521 » Sun Dec 04, 2011 4:48 am

[Please Register or Login to download file]
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1370 times

Postby navguy » Sun Dec 04, 2011 4:50 am

OK i`ll back up my sys.txt.

Am i copying your sound & warning texts only ?

Yeah i`ll have your partial speed.txt.
Navman S50 with iGO8 and iGO Primo on one 4GB sd card.
navguy offline


User avatar Junior Member



 
Joined: Wed Nov 30, 2011 11:50 am
Posts: 70
Location: Australia
Has thanked: 0 time
Been thanked: 0 time

Postby chas521 » Sun Dec 04, 2011 4:53 am

No, copy my entire sys.txt. If you need your device specific entry[s] make them also.
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1370 times

Postby chas521 » Sun Dec 04, 2011 4:57 am

If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!

Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
chas521 offline


User avatar Ex Moderator



 
Joined: Sat May 15, 2010 8:50 pm
Posts: 4549
Location: Long Island, NY
Has thanked: 64 times
Been thanked: 1370 times

PreviousNext

Return to General Discussions about iGO core

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 9 guests