Requests--Make your requests for iGo-Primo here

hi there... any teletlas for uk latest building and dem? and what means the histspeed folder in the contents folder... i dont have anything inside the histspeed folder... thanks

maps-buildings-dem-poi-f82/roi-content-pack-t6824.html#p125225

please israel 2014 map
thank you

When they are available you will always find all maps, including Israel map here : maps-buildings-dem-poi-f82/
"Available" means : the map is out - 2014 aren't yet - and someone has shared the map.

I have been trying to get iGO North America 2013.Q3 HERE (fbl, fda, fsp. hnr, poi, rich_poi, 3dc, 3dl) for months and links always broken/removed. Could someone PM me at my gmail

Check the relevant thread on Sun. morning.

Hi, Have a couple of requests if thats ok.... I have trolled the site for answers and to be honest, if i found them, i probably wouldnt know or be to scared of messing things up to do anything with them. Any way.. Requests:

Igo Primo 2 running on a really good chinese no name machine which has wince 6. Current sys txt included at the bottom for your perusal which i hope helps..

First. How do you reduce the size of txt for street names as they seem to be very large and bleed over a few roads at once, I would of thought these might + / - with zoom but they dont.

second. Same thing with the arrow Icon.

Third. speed cams don't seem to show. i have a file called Speedcamupdates.spud but nothing else in the speedcam file. is there another file supposed to be in there and if so what and please can i have it?

I hope i have done this correctly, if not ..Sorry but please help.. Cheers and thanks.

Sys txt:

[device]
type="Generic_device"

[gps]
port=3
baud=57600

[power]
powermgm_state="1"
skip_suspend_process_all="1"

[Main]
ShowExit=1

[interface]
show_exit=1
extra_settings=1
resolution_dir="800_480"
;vga=0
;show_bugreport=1

[3d_config]
disable_roadsign_navigation_mode=1
rotated_roadsigns=1
show_guidance_arrows=1
show_guidance_strip=1

[sound]
csv_voice_enabled=1
use_method=1
queue_length=200
sound_volume=255
voice_volume=255
mute_os_key=1
ding=0

[route]
correctness=90

[warning]
speedcam_enabled=1 ;(0)
speedcam_visualtype=1 ;(1)
speedcam_soundtype=1 ;(1) 1=warn if overspeed 2=approach
speedcam_soundtype_4=2 ;
speedcam_warning=1 ;(0)
;speedcam_check_frc=1
speak_tts_only=1
speedwarn_alt_builtup_based=1 ;(0)
speedwarn_alt_limit=1 ;(0)
speedwarn_alt_tolerance=110 ;(100)
speedwarn_alt_toltype=1 ;(0) alternative tolerance type
speedwarn_tolerance=110 ;(100)
speedwarn_toltype=1 ;(0) absolute or percentage

[debug]
skip_eula=1
enable_roadshadow=1
loop_sim=1
sound_q_length=200
reserve_memory=1835008
cache=262144
experimental_features="1"

[map]
auto_nightmode=1
map_mode="3D"

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=2

For the font size:
put this line under the [interface]: mapfontscale=130
and try to play with some values (70, 80, 90 etc.)

To reduce arrow size, add this 3 lines under [map] and play with those 3D numbers [reduce] until you like it.
[map]
3dcarsizemul=10000
3dcarsizemin=7000
3dcarsizemax=8000

For the speedcams:
First, it can be that the file you have is not for your area. When you get txt file for your area, delete the file you have, copy the txt file to content/speedcam and restart the program. The speedcam DB (spud) will be created then.
Second, did you turn on the speedcam alerts from menu (Settings-> Sound and Warnings->Alert Point Settings)?
Remember, this setting become enabled when creating a route and/or outside, when you have full Satellite reception.
You will not hear speedcam alerts during route simulation, it will only be visible on map.

Every time after doing changes in your sys.txt and before you restart the program, delete the "save" folder from the root of your program. You Will be required to reconfigure some settings again.

Hi, I am seeking a working copy of Igo Primo2 and Western Europe truck maps

programs : program-data-zip-branding-zip-license-f83/
maps : maps-buildings-dem-poi-f82/

For trucks, you need the .ftr files and the correct licenses. I can not check right now for these license, but they are included in many downloads. And in the program section is a thread for a license pack as well

Hi, Help Please......

Igo Primo 2 running on wince 6.... sys txt below. very good chinese no name head unit.

My request is for help with TTS Pro voices.

found 2 TTS Pro voices on here for uk, did as was told and copied them to content/voices.

in the voice menus they are offered so i choose one and then back out of the menues. it then defaults back to a natural voice.

I have noticed a TTS section in the menu that is greyed out. and i am wondering if i have to change something in the sys txt to turn it on? Or is there something else... I am a real novice at this but i can follow instructions

would be very greatfull for any help.

[device]
type="Generic_device"

[gps]
port=3
baud=57600

[power]
powermgm_state="1"
skip_suspend_process_all="1"

[Main]
ShowExit=1

[interface]
show_exit=1
extra_settings=1
resolution_dir="800_480"
mapfontscale=150
;vga=0
;show_bugreport=1


[3d_config]
disable_roadsign_navigation_mode=1
rotated_roadsigns=1
show_guidance_arrows=1
show_guidance_strip=1

[sound]
csv_voice_enabled=1
use_method=1
queue_length=200
sound_volume=255
voice_volume=255
mute_os_key=1
ding=0

[route]
correctness=90

[warning]
speedcam_enabled=1 ;(0)
speedcam_visualtype=1 ;(1)
speedcam_soundtype=1 ;(1) 1=warn if overspeed 2=approach
speedcam_soundtype_4=2 ;
speedcam_warning=1 ;(0)
;speedcam_check_frc=1
speak_tts_only=1
speedwarn_alt_builtup_based=1 ;(0)
speedwarn_alt_limit=1 ;(0)
speedwarn_alt_tolerance=110 ;(100)
speedwarn_alt_toltype=1 ;(0) alternative tolerance type
speedwarn_tolerance=110 ;(100)
speedwarn_toltype=1 ;(0) absolute or percentage

[debug]
skip_eula=1
enable_roadshadow=1
loop_sim=1
sound_q_length=200
reserve_memory=1835008
cache=262144
experimental_features="1"

[map]
auto_nightmode=1
map_mode="3D"
3dcarsizemul=5000
3dcarsizemin=3000
3dcarsizemax=4000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=2

Delete the save folder. A new one will be created when you enter/exit the program.

Sorry, should of said .... deleted the save folder at the time of loading the 2 TTS zip files to the voice folder.
Just did it again though as you advise, but still exactly the same, thanks though, if you have any more advice, would appreciate it.

AFTER you delete the save folder, you must completely shutdown the device, wait a few seconds and then re-start.

Did you install the matching tts engine, or just the voice files?