Satellites visibility problem   

Satellites visibility problem

Postby nabilone » Fri Jun 03, 2011 11:51 am

Primo 1.2

Dear friends,

I have a problem with my satelittes visibility (as shown on picture).
Although GPS fix is OK, the satellites information is not present on "GPS informations" section.
As you can see, the Fix OK (precision : average) but 0 satellite available.

Any idea?

Thanks
nabilone offline


Junior Member



 
Joined: Thu May 20, 2010 6:31 pm
Posts: 64
Has thanked: 0 time
Been thanked: 0 time

Postby nabi » Fri Jun 03, 2011 12:19 pm

You are not a newbie, so I guess you have clear view etc ? All conditions are met to see satellites?
Is this happening only in Primo1.2? Or using other nav soft (Primo1.1, iGO8, ...) as well?
________________________________________________________________________
When I do good, no one remembers, when I do wrong, no one forgets
.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
nabi offline


Ex Super Mod



 
Joined: Mon Dec 28, 2009 5:22 pm
Posts: 2429
Location: somewhere unknown
Has thanked: 39 times
Been thanked: 233 times

Postby nabilone » Fri Jun 03, 2011 5:12 pm

Hi nabi,

This only happens with Primo 1.2 (i'm using Build 9.2.1.179499).

What do you mean by "All conditions are met to see satellites?"

Remember that I have Satellite fix (that's work), only sat visibility on sat information screen.

Thx
nabilone offline


Junior Member



 
Joined: Thu May 20, 2010 6:31 pm
Posts: 64
Has thanked: 0 time
Been thanked: 0 time

Postby jessecj » Sat Jun 04, 2011 9:02 am

I have the same problem, as is only on Primo 1.2 also. It's more a graphic error than a software or hardware problem.
The GPS connects ok, say high or average signal.. but in the display no satellites are shown.
I also find that it does not happen 100% of the time, if i suspend the device rather than shutting it down, then they are displayed, but also this is not everytime in this senario.
But saying that it does not appear to cause any problems, but would be nice to see how many satellites are connected at the time.
jessecj offline


Junior Member



 
Joined: Sun Aug 22, 2010 12:53 am
Posts: 3
Has thanked: 0 time
Been thanked: 0 time

Postby Yurbuh Tuggly » Sat Jun 04, 2011 9:29 am

Honestly, I never looked at or bothered with that particular graphic display--do I have enough of a lock to navigate with?--that's all I really care about.
However, the diMka skin for Primo 1.2 has an option near the speed display (optionally the speaker on/off button) to also display (tiny, but readable) how many satellites are currently locked onto and their respective strength. That works.
Yurbuh Tuggly offline


User avatar Ex Moderator



 
Joined: Wed May 04, 2011 7:25 am
Posts: 1410
Location: Politzania
Has thanked: 0 time
Been thanked: 797 times

Postby nabilone » Mon Jun 06, 2011 11:09 am

I found this solution, on a french forum :

adding this on sys.txt :

[gps]
port="x" ;<<--- your GPS port com
baud_rate="xxxxx" ;<<--- your GPS baud rate
set_messages="0" ; <<-- This line is supposed to resolve satelitte visibility issue

It seems to be ok but I have some doubts. I feel that information about satellites is not refreshed in real time.

If jessecj can test this solution and give us fedback...
nabilone offline


Junior Member



 
Joined: Thu May 20, 2010 6:31 pm
Posts: 64
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Mon Jun 06, 2011 11:54 am

I have a feeling that Primo 1.2 has changed the way the satellite data is read which causes problems with devices that cache their gps data.

There was another thread recently about erratic vehicle speed displayed, Possibly a bug? i don't know.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby arthurweasel » Tue Jun 07, 2011 5:31 pm

do you need to put these " " in the text as well as the figure thanxs
arthurweasel offline


V.I.P Member



 
Joined: Thu May 20, 2010 7:16 pm
Posts: 14
Has thanked: 12 times
Been thanked: 1 time

Postby Fatboyfun » Tue Jun 07, 2011 6:47 pm

arthurweasel wrote:do you need to put these " " in the text as well as the figure thanxs


I never have and it works just fine.
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby nabilone » Tue Jun 07, 2011 8:00 pm

Fatboyfun wrote:I never have and it works just fine.


Personnaly, I put it and it works. It seems that it works in both cases, with or without " ".
nabilone offline


Junior Member



 
Joined: Thu May 20, 2010 6:31 pm
Posts: 64
Has thanked: 0 time
Been thanked: 0 time

Postby arthurweasel » Wed Jun 08, 2011 5:42 pm

most of the time it takes ages for the satellites to go green... even being in the open with no trees or buildings.. on primo 1.2
it was a lot better on igo 8.3.. they normally locked straight away
i just like the skins on primo.
arthurweasel offline


V.I.P Member



 
Joined: Thu May 20, 2010 7:16 pm
Posts: 14
Has thanked: 12 times
Been thanked: 1 time

Postby jessecj » Thu Jun 09, 2011 12:08 am

I have tested Primo 1.2 with the lines that Nabilone suggested to put in the sys.txt file in all senarios, and it has appeared to have fixed this issue.
The satelittes are now showing up everytime i go into the graphic display.

Thanks Nabilone.

Cheers
Jesse

nabilone wrote:I found this solution, on a french forum :

adding this on sys.txt :

[gps]
port="x" ;<<--- your GPS port com
baud_rate="xxxxx" ;<<--- your GPS baud rate
set_messages="0" ; <<-- This line is supposed to resolve satelitte visibility issue

It seems to be ok but I have some doubts. I feel that information about satellites is not refreshed in real time.

If jessecj can test this solution and give us fedback...
jessecj offline


Junior Member



 
Joined: Sun Aug 22, 2010 12:53 am
Posts: 3
Has thanked: 0 time
Been thanked: 0 time

Postby nabilone » Fri Jun 10, 2011 12:14 am

Yes, it seems to be ok now.
Thank you for your feedback!
nabilone offline


Junior Member



 
Joined: Thu May 20, 2010 6:31 pm
Posts: 64
Has thanked: 0 time
Been thanked: 0 time

Postby arthurweasel » Fri Jun 10, 2011 7:06 am

i just cracked my satellite problem,, i moved the gps reciever under the dash, now it picks up 9 sats straight away and go green very quickly..
arthurweasel offline


V.I.P Member



 
Joined: Thu May 20, 2010 7:16 pm
Posts: 14
Has thanked: 12 times
Been thanked: 1 time


Return to General Discussions about iGO core

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: Bing [Bot] and 44 guests