It's always an X-Series that gives problems!!!

3543

Download and extract this archive, and copy to the empty SD card, reboot.

This utility will just set the system memory division, The device will not display any message, ie, nothing will appear to happen.

Copy the Primo installation back to the card, reboot and try it again.

Also try adding these lines to the sys.txt...

[debug]
max_memory=35000000
reserve_memory=1700000
cache=600000

Fatboyfun wrote:It's always an X-Series that gives problems!!!

3543

Download and extract this archive, and copy to the empty SD card, reboot.

This utility will just set the system memory division, The device will not display any message, ie, nothing will appear to happen.

Copy the Primo installation back to the card, reboot and try it again.

Also try adding these lines to the sys.txt...

[debug]
max_memory=35000000
reserve_memory=1700000
cache=600000

ive done that, loaded primo1.2 from chas link post #10,edited sys text as you said,rebooted primo starts loading up,went to settings to check what everything set at,then a box came up saying error out of memory requested 113469 cache 440,rebooted started again then i got into the sound setting then a box came up saying out of memory requested 4296 cache 440 pressed ok to clear them,then primo shut down


il will leave it for tonite,and let you have a ponder in what other way gaining more ram on this x430

thanks for your time and knowledge,ive learnt summat aswell (never buy another x430)

Try Primo 1.1 or go to iGO8

Bazzle

bazzle wrote:Try Primo 1.1 or go to iGO8

Bazzle

primo 1.1 is the same keeps crashing with memory problems

Magnu420 wrote:primo 1.1 is the same keeps crashing with memory problems

A while ago (post #4) you said you had Primo 1.2 running, but only had trouble when you tried to add the TTS-Pro voices?
Maybe you should go back to that, but without the additional TTS voices. With 64 MB of memory, you may want to avoid TTS, and some other memory intensive things like zillions of POIs, DEM files, 3d Buildings, etc. Any "bare-bones" version of Primo should run on a 64MB device without too much difficulty.

I've had a bare minimum Primo 1.1 install working on a 32MB device in the past, It may be something in the ROM that's causing the memory errors, Windows CE Dll load failures cause a not enough memory error message to be displayed.

I've said before that the X Series is the problem child of the range, Sometimes it's a case of "What's right for the device, not what's right for you" Usually it's Tomtom that gives the problems!

@Magnu420

Since you said that iGo8 was working but you didn't like the look of it, why not try using it again and do as Bazzle suggests with a different skin?