Xtrons D710G problems with IGO Primo 1.2

I gave up trying to get 1.1 to work on the xtrons unit i think its because win ce is locked up by them i am using 1.2 :D

Did you try my suggestion or not???

chas521,

Ok thanks again for the 1.1 info and will try the maps with only .fbl file. will delete the save folder and 8.3 that you gave me works ok aprt from not seeing the GPS but have put port etc in sys.txt and will test a bit later. the final test is on the way home to see if memory problems with routing. again thanks for your help.

nabi,
yes i already have tried that in my sys.txt and deleted save folder etc and still same problem with 1.2 and 1.1 but ok so far with 8.3


danny27404,
do you mean you could not get it working with 1.1 but you got 1.2 working fine?


Thanks again everyone for your help

Brian

Thanks for the info, but I am surprised it didn't work.

brian colston wrote:chas521,

Ok thanks again for the 1.1 info and will try the maps with only .fbl file. will delete the save folder and 8.3 that you gave me works ok aprt from not seeing the GPS but have put port etc in sys.txt and will test a bit later. the final test is on the way home to see if memory problems with routing. again thanks for your help.

nabi,
yes i already have tried that in my sys.txt and deleted save folder etc and still same problem with 1.2 and 1.1 but ok so far with 8.3


danny27404,
do you mean you could not get it working with 1.1 but you got 1.2 working fine?


Thanks again everyone for your help

Brian

Yea 1.1 was a no go but 1.2 the one I'm working on now works 100% all Res also. Just struggling to get hgv to work.

danny27404,

could you zip me a copy of your files so i can try on mine please thanks

I have got 8.3 working ok but the dam thing will not detect my gps. does anyone know if i need extra dll or something. I have put the port and band rate in the sys.txt file but just keeps saying automatically detecting gps but does not dectect it :( but no memory problems now when clicking on the maps so not sute if deleting the second file for the maps helped. just need to get it seing my GPS

Thanks

Brian

port 2 bitrate 32000 for xtrons systems. Does it come up with memory error memory 4036 cache 0? this one works on my 2 year old xtrons unit also. can you give me 2 days im at work untill the weekend id rather use home broadband to zip the files up then i'll pm you a link. however can you copy your new sys.txt maybe i can see what your problem is from there?

here is mine

;Truck systext mk7

[device]
type="Primo" ; Write Navi Type (Name)

[utility]
calibratefix=1 ; ; If gps signal don't lost write - "0"; if lost write "1"

[Interface]
vga=0
show_exit=1
show_minimize=1
extra_settings=1
shutdown_time=0
capture_to_jpeg=1
show_mapchanger=1
show_programs=1

[rawdisplay]
highres=0
stretch=1
screen_x=800
screen_y=480
class="landscape"

[folders]
app="\StorageCard\"
content="StorageCard\content"
map="StorageCard\content\map"
kmlpoi="userdata\poi" ;"content\poi"
kmlroute="userdata\route" ;"content\userdata\route"
has_secondary_root=0

[gps]
baud=38400 ;- write "baud rate"
port=2 ;- write port
source="virtserial"
set_messages="0" ;

[mapchanger]
map_ta="TELEATLAS" ; - you can write other title
map_nt="NAVTEQ"
map_ot="TOP MAP"

[tripcomputer]
num_of_trips=4

[vr]
disabled=0

[3d_config]
disable_roadsign_navigation_mode=0
roadsign_lines_per_screen=10
rotated_roadsigns=0

[sound]
csv_voice_enabled=1
ding=0

[debug]
skip_eula=1
screenshotsavecameraini=0
screenshotfilename="\captures\ecran_%02d.jpg"
show_battery_percent=1
experimental_features=1
show_networkservices=1

[lua]
backlightdetails=1

[gestures]
border_width=130

[network]
available="1"

[tmc-http]
enabled=1

[http]
enabled=1

[other]
demo_enabled=0

[map]
show_oneway=1
2dheadup=1
show_oneway_3d=1
poi_grouping_distance=0
3d_max_zoomlevel=800;
3d_min_zoomlevel=30;40
speedcam_visibility=500;
3d_max_tiltlevel="8700"
3d_default_tiltlevel="8200"
3d_max_zfar=5000
3d_buildings=1
3d_landmarks="1"
3d_roads="1"
3d_tunnels="1"
follow_gps=1

[2d]
guidancearrow_disappearlevel=600
guidancearrow_maxshift=12
minguidancearrowsize=20
minguidancearrowsize_zoomlevel=1200
maxguidancearrowsize=65
maxguidancearrowsize_zoomlevel=0

[3d]
planned_route_track_width="5"
planned_route_track_contour_width="1"
planned_route_contour_width="1"
max_pois_on_horizont="5"

[navigation]
junction_view_distance=300 ;(200)
junction_view_distance_ramp=300 ;(400)
junction_view_distance_highway=400 ;(800)
simple_crossborder_warning=1
use_duration_for_tunnel=0
show_current_city=1
show_city_in_next_street = 1
show_city_in_next_street_distance = 1000
autoreplan_action="AUTO"
gps_pos_to_road=1
show_countrychange=1

[camera.roundabout]
enabled=0

[feature]
text_guidance=1
signpost_coloring=1
tmc_event_coloring=1
tmc_traffic_side=1
ding=0

[dynamiccompressor] ;TTS voice
compressor=1
gain=10

[tts]
automatic_direction_conversion=1
announce_exit_directions=1
always_say_road_names=3
skip_exit_numbers=1

[warning]
speedcam_enabled=1
speedcam_warning=1
speedcam_max_lookahead=1000
speedcam_maxdistance_from_road=50

; S P E E D C A M - C A T : 0
[speedcam_category:0]
approach_beep_distances="950,450"
approach_beep_sound="Fixed_Camera"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 1
[speedcam_category:1]
approach_beep_distances="450,450"
approach_beep_sound="Mobile_Camera"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 2
[speedcam_category:2]
approach_beep_distances="950,150"
approach_beep_sound="Redlight_Camera"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 3
[speedcam_category:3]
approach_beep_distances="950,150"
approach_beep_sound="Section_Start"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 4
[speedcam_category:4]
approach_beep_distances="950,150"
approach_beep_sound="Redlight_Camera2"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 5
[speedcam_category:5]
approach_beep_distances="950,150"
approach_beep_sound="Railroad"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 6
[speedcam_category:6]
approach_beep_distances="950,150"
approach_beep_sound="Give_Way2"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 7
[speedcam_category:7]
approach_beep_distances="950,550"
approach_beep_sound="FixMobil"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 8
[speedcam_category:8]
approach_beep_distances="450,150"
approach_beep_sound="Speed_Breaker"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 9
[speedcam_category:9]
approach_beep_distances="450,150"
approach_beep_sound="Children"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 10
[speedcam_category:10]
approach_beep_distances="450,450"
approach_beep_sound="Dangerous_turn"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 11
[speedcam_category:11]
approach_beep_distances="450,450"
approach_beep_sound="Tunnel"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 12
[speedcam_category:12]
approach_beep_distances="450,450"
approach_beep_sound="Dangerous_way"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 13
[speedcam_category:13]
approach_beep_distances="450,450"
approach_beep_sound="POI"
overspeed_sound="over_speed_limit"
min_frc=5

; S P E E D C A M - C A T : 14
[speedcam_category:14]
approach_beep_distances="950,150"
approach_beep_sound="RPS_Post"
overspeed_sound="over_speed_limit"
min_frc=5

brian colston wrote: I have got 8.3 working ok but the dam thing will not detect my gps. does anyone know if i need extra .dll or something. I have put the port and band rate in the sys.txt file but just keeps saying automatically detecting gps but does not detect it but no memory problems now when clicking on the maps so not sure if deleting the second file for the maps helped. just need to get it seeing my GPS

Thanks

Brian

Did you try the port and baud numbers given by danny27404?

danny27404,

yes you are correct with the error " memory error memory 4036 cache 0"

but i think there is now a problem with my unit as i put syngic back in there today and the saying hardware problems on detecting GPS. think my unit has gone and did try a reset but nothing :( so might even have to take it out and send back as i am sure the port will be in the unit and not apart of the GPS aerial.

Thanks so much for everyones help and will get back when i fix the problem with the unit

Thanks

Brian

Ok when you get it back download my finished product and you will be all on your way :D :D try resetting the system rather than rip it out and send it back they do have a habbit of randomly breaking. my 714 every now and then refuses to detect the GPS and just a simple reset fixes it.

danny27404,

Did try and reset but still not working. Did contact Xtrons and they said first try another aerial and i have ordered one before it goes back for repair. thanks for the help and if you want to send me the link then that would be good

Thanks again for yours and everyone elses help

Brian

goto my post i put the link up there.