minterno wrote:hi guys,i hope im not double posting here,i have Navcore.8.351.9982 on a tomtom go 530 and i want to install the uk and ireland or european maps on it,i have had a good look around the site but im still a bit confused as to what i need to do,is there a step by step guide for dummies,im looking for the map number and instructions on how to install it on my unit/memory card,regards

You might look here: 865 maps with installer and FastActivate Read ALL of the instructions CAREFULLY. You want a 865.3245 full feature map. If you have a 2GB card, the UK & ROI will be no problem. For an Europe map, You will need at least a 4GB card. If you have tried to boot the 530, with 8.351 on the card & the card in the device, look in the card for a ttgo.bif file. If it is there, then use 865 maps with installer and FastActivate to load the map of your choice onto the card.
If you have not done this, then do so to create the needed ttgo.bif file. If it is there, now use 865 maps with installer and FastActivate to load the map of your choice onto the card.

thanks tendriver,i am getting the maps now,as regards to your question in post 14 of this thread which i missed,just seen it now,when the 530 is in the charging cradle the device does ask if i want to connect to the computer and when it connects i get the message 'no maps found',regards

minterno wrote:thanks tendriver,i am getting the maps now,as regards to your question in post 14 of this thread which i missed,just seen it now,when the 530 is in the charging cradle the device does ask if i want to connect to the computer and when it connects i get the message 'no maps found',regards

Is the card inserted, when your are asked if you want to connect to your computer?

yes tendriver,the card was inserted when i was asked did i want to connect to the computer.I have installed the maps 'europe 865,3245 but i am getting an error message as follows'problem with map
you cannot use this map on this device:europe-297,if you have any ideas on what i could do from here that would be great,regards

minterno wrote:yes tendriver,the card was inserted when i was asked did i want to connect to the computer.I have installed the maps 'europe 865,3245 but i am getting an error message as follows'problem with map
you cannot use this map on this device:europe-297,if you have any ideas on what i could do from here that would be great,regards

run FastActivate Premium from root directory, be sure here is file ttgo.bif also
1. patch your navcore (button ttsystem/PNDnavigator) if not already patched
2. patch your map (button Maps/Voices/Speedcams)

where you get this error "you cannot use this map on this device"
device or TomTom HOME?

thanks PiEtU and tendriver for all the help,the unit seems to be working fine,im not familar with the unit as this is the first time i have seen it working but the maps are loaded and it look to be spot on,ye were both very helpfull thanks

Nice... You are welcome

I tried out the unit on the demo mode and it works a treat,just to recap for anyone with a similar problem,I loaded navcore and maps on the memory card itself and not the sat nav as the hdrive in the sat nav seems to be broke,the unit was stuck at start up and after following the advice of PiEtU and tendriver i now have myself a fully working tomtom and an delighted with it,regards

minterno wrote:I tried out the unit on the demo mode and it works a treat,just to recap for anyone with a similar problem,I loaded navcore and maps on the memory card itself and not the sat nav as the hdrive in the sat nav seems to be broke,the unit was stuck at start up and after following the advice of PiEtU and tendriver i now have myself a fully working tomtom and an delighted with it,regards

There is one more very important step to take before you are finished. Try to copy the contents of the card onto the internal memory. If successful, then remove the card & attempt to boot the unit. This final step will confirm whether the internal memory is actually good or bad.

tendriver wrote:There is one more very important step to take before you are finished. Try to copy the contents of the card onto the internal memory. If successful, then remove the card & attempt to boot the unit. This final step will confirm whether the internal memory is actually good or bad.

He/She cant connect it to PC with internal memory, he is tested it with several computer....
but any way... now you can try it again maybe you are lucky and you get access to internal memory also some how,
you have works SD-Card now.....

PiEtU wrote:He/She cant connect it to PC with internal memory, he is tested it with several computer.... but any way... now you can try it again maybe you are lucky and you get access to internal memory also some how,

PiEtU,

I am well aware of his/her situation!!!! As I clearly stated, "This final step will confirm whether the internal memory is actually good or bad".

tendriver wrote:PiEtU,

I am well aware of his/her situation!!!! As I clearly stated, "This final step will confirm whether the internal memory is actually good or bad".

And how he do that if not access to internal memory?

maybe some trick found... but right now it is impossible i think

PiEtU wrote:And how he do that if not access to internal memory?

maybe some trick found... but right now it is impossible i think

PiEtU,

As I clearly stated, "Try to copy the contents of the card onto the internal memory. If successful, then remove the card & attempt to boot the unit.

tendriver wrote:PiEtU,

AS I clearly stated, "Try to copy the contents of the card onto the internal memory. If successful, then remove the card & attempt to boot the unit.

I do not want to be rude, but the internal memory does not work and can not connect to the computer.
She can not TRY to copy anything if the internal memory does not appear on the computer

he say that first post....

PiEtU wrote:he say that first post....

You may wish to reread post 1.