TT GO 730 restarting after 90sec, no GPS signal   

TT GO 730 restarting after 90sec, no GPS signal

Postby janek.vl » Sun May 26, 2013 8:38 pm

Could someone help me to find the ideal combination of Navcore and maps (CEE region) please? My Go730 hasn´t been updated for few years.
Today, after connecting to PC some updates were installed, but now the device stopped working (the old maps were cracked). It boots, but after exactly 90 second it reboots. And can not find any GPS signal. When I just run Navcore without maps loaded in device, it stays without reboots. Also when map is not activated the device stays turned on.
I tried to instal different versions of Navcore (9.051, 9.465 and 9.530SE), maps (Western_and_Central_Europe_2GB_860_3110, Central_and_Eastern_Europe_910_4892, Eastern_Europe_910_4952) but no success. I used FastActivation 04.04.2013 and Albert´s EasyActivator 0.57.21 (both gave me OK as a result).
I tried to format the internal memory (FAT16 and FAT32), to clear flash with ClearFlash (always 5x), to delete mapconfig.cfg in maps folder, to "Operate Go" in TomTom Home 2.

What´s wrong?

The device can´t also read my ADATA microSDHC 8 GB card in SD adapter - it shows me only 256 Mbytes. Why?

Thanks.

JV.
janek.vl offline


Junior Member



 
Joined: Sun May 26, 2013 8:36 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby tendriver » Sun May 26, 2013 11:47 pm

janek.vl wrote:Today, after connecting to PC some updates were installed, but now the device stopped working (the old maps were cracked).


TT Home installed navcore 9.510, which is the current navcore for your 730. Patch it with 9[size=85].510 SE ttsystem.rar[/size] & you are back in business. Everything that you did after the TT Home update was a total waste of your time.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Postby janek.vl » Mon May 27, 2013 7:37 am

tendriver: thank you for reply. But it did not help. I´ll try to describe step by step my process:

1) format the internal memory (not quick format, FAT file system)
2) run clearflash several times
3) connect to PC (TT Home 2) and install some version of Navcore
4) disconnect, boot, wait for error with "no maps found"
5) connect again, update Navcore to actual version
6) copy map directory to root directory of device
7) copy fastactivate (updated to 2013-05-20) to root
8) run fastactivate step by step
9) copy your file (ttsystem) to root
10) disconnect and reboot the device

And the problem remains. Where did I make a mistake?
janek.vl offline


Junior Member



 
Joined: Sun May 26, 2013 8:36 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby tendriver » Mon May 27, 2013 3:59 pm

janek.vl wrote:And the problem remains. Where did I make a mistake?


Please run TomTom Current Configuration {13.11.2011} Post your results here.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Postby janek.vl » Mon May 27, 2013 7:10 pm

ttgo.bif:
DeviceName=TomTom GO 730
DeviceVersionHW=GO 730
DeviceSerialNumber=J4xxxxxxxxxx
BootLoaderVersion=10012
ApplicationVersionVersionNumber=9510
ApplicationVersion=1234792.1
CurrentMap=
CurrentMapVersion=0.0

Map(s):
H:\Central_and_Eastern_Europe_910_4892\

Storage:
Size 1958MB, Free 840MB
TTGO.BIF:
DeviceName=TomTom GO 730
DeviceVersionHW=GO 730
BootLoaderVersion=55128
ApplicationVersionVersionNumber=9510
ApplicationVersion=1234792.1
CurrentMap=Central_and_Eastern_Europe_910_4892
CurrentMapVersion=910.4892
TTGO.BAK:
Not Found...
TTGO.ORI:
Not Found...
TTNAVIGATOR.BIF:
Not Found...
janek.vl offline


Junior Member



 
Joined: Sun May 26, 2013 8:36 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby tendriver » Tue May 28, 2013 2:45 am

janek.vl wrote:Also when map is not activated the device stays turned on


This quote from post 1 confirms that at that point, the navcore was not patched.

janek.vl wrote:TTGO.BIF:
DeviceName=TomTom GO 730
DeviceVersionHW=GO 730
BootLoaderVersion=55128
ApplicationVersionVersionNumber=9510
ApplicationVersion=1234792.1
CurrentMap=Central_and_Eastern_Europe_910_4892
CurrentMapVersion=910.4892


If there is a .meta & a .meta.dct file in the Central_and_Eastern_Europe_910_4892 map folder, then we are back to the 9.510 navcore not being patched.

If there is a .meta.dct file in the 910_4892 folder, cut & copy it to your desktop. The 910.4892 map in now unpatched. Copy the unactivated map, referred to in line 1 of this post, into your unit. Disconnect & reboot the device. If the device does a complete boot up, this confirms that the 9.510 navcore is still not patched.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Postby janek.vl » Tue May 28, 2013 5:47 am

..:: FastActivate 25.05.2013 ::..
________________________________________________________________

Voice(s):
Complete Map(s):
Central_and_Eastern_Europe-781.meta => .dct OK
Incomplete Map(s):
Fuel prices:
Speed cameras:
________________________________________________________________

BIF File......H:\TTGO.BIF
KeyGen Type...8
Device Name...TomTom GO 730
Application...9510
Bootloader....55128
DeviceID......***********
Storage.......Size 1958MB, Free 838MB

..:: FastActivate 25.05.2013 ::..
__________________________________________________________


Your Navcore have been Patched already.


--- should i try to download another copy of this version of maps?
janek.vl offline


Junior Member



 
Joined: Sun May 26, 2013 8:36 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby janek.vl » Tue May 28, 2013 8:06 am

tendriver wrote:If there is a .meta.dct file in the 910_4892 folder, cut & copy it to your desktop. The 910.4892 map in now unpatched. Copy the unactivated map, referred to in line 1 of this post, into your unit. Disconnect & reboot the device. If the device does a complete boot up, this confirms that the 9.510 navcore is still not patched.


When i removed .meta.dct file from device and rebooted it, red screen with "the map can not be used in this device" showed up. But FastActivate says my Navcore is patched (see above).
janek.vl offline


Junior Member



 
Joined: Sun May 26, 2013 8:36 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby Downunder35m » Tue May 28, 2013 8:34 am

What about posting #2 ???
Forum rules

[Please Register or Login to download file]

If you find broken links or missing attachments in my postings, please send me PM
Password for all my files: downunder
Downunder35m offline


User avatar Elite Member



 
Joined: Wed Oct 21, 2009 4:44 am
Posts: 4250
Has thanked: 18 times
Been thanked: 572 times

Postby janek.vl » Tue May 28, 2013 9:49 am

#2 ?? Sorry, I don´t get it.
janek.vl offline


Junior Member



 
Joined: Sun May 26, 2013 8:36 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby Downunder35m » Tue May 28, 2013 11:28 am

Are you sure you used the SE ttsystem?
You are doing something wrong and I doubt FA is the problem.
And patching a SE Navcore should not be done as it is already patched!
Forum rules

[Please Register or Login to download file]

If you find broken links or missing attachments in my postings, please send me PM
Password for all my files: downunder
Downunder35m offline


User avatar Elite Member



 
Joined: Wed Oct 21, 2009 4:44 am
Posts: 4250
Has thanked: 18 times
Been thanked: 572 times

Postby tendriver » Tue May 28, 2013 4:15 pm

janek.vl wrote:When i removed .meta.dct file from device and rebooted it, red screen with "the map can not be used in this device" showed up.


You didn't follow the complete instructions in post 6.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Postby janek.vl » Tue May 28, 2013 8:16 pm

Downunder35m wrote:Are you sure you used the SE ttsystem?

I used this: "Pack Navcore SE 9.510 for GO (9.510.1-2039.CAB-navcore-GO"
janek.vl offline


Junior Member



 
Joined: Sun May 26, 2013 8:36 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby janek.vl » Tue May 28, 2013 8:21 pm

tendriver wrote:If there is a .meta & a .meta.dct file in the Central_and_Eastern_Europe_910_4892 map folder, then we are back to the 9.510 navcore not being patched.

yes, both files are there.


tendriver wrote:If there is a .meta.dct file in the 910_4892 folder, cut & copy it to your desktop. The 910.4892 map in now unpatched. Copy the unactivated map, referred to in line 1 of this post, into your unit. Disconnect & reboot the device. If the device does a complete boot up, this confirms that the 9.510 navcore is still not patched.

yes, this exactly happened.
janek.vl offline


Junior Member



 
Joined: Sun May 26, 2013 8:36 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby tendriver » Tue May 28, 2013 9:36 pm

janek.vl wrote:I used this: "Pack Navcore SE 9.510 for GO (9.510.1-2039.CAB-navcore-GO"


May I ask where you got this??
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Next

Return to General Discussions about TomTom

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 15 guests