Hi all
Has anyone managed to upgrade the Navcore on a TomTom Start to either a full v8 ie v8.417 navcore or a better v9 navcore with a full change preference menu and a naccore that works with ALG as i have tried and cant get any version to work fully exept the one for the Start but that one has limited menu and wont let ALG work with with compatable ALG maps.
At the moment i have v9.053 on my start but it is a very basic version but i have put a better version of 9.053 on my TomTom one v4 but when i try to put it on my Start all works fine but i just can not get any sound at all.I have tried everthing but cant get any sound / speach at all.
If someone can make a working vavcore that will work on a TomTom start and has all the settings and will make ALG work can they please post a copy.
Thanks.

Not sure if it works ok on a Start but you can try the 9.205, it is for the Rider but should work on your device too.
Make a backup using the Windows Explorer first!
[Please Register or Login to download file]
Password : downunder
Copy all files and folders from the archive to the root of your device/SD card.
It is best to have a device without a Navcore installed. Maps, voices and other personal stuff can stay on the device.
After the first start which can take a while the device will reboot once - that is normal and should not be interrupted.
There are no Loquendo voices included and I think it is best to use normal voices for the first try, you can experiment with TTS if everything else works fine.
If this Navcore is a no go for you too than you can only try the Dark Mireille version for the Start.

i have the same problem. Navcore 9.205 and no sound. Which Navcore ist the most extensive and active sound.
Please help
tomtom start 1GB 32 MB

szoniu wrote:i have the same problem. Navcore 9.205 and no sound. Which Navcore ist the most extensive and active sound.
Please help
tomtom start 1GB 32 MB

Loosing sound is a commen problem with some of the newer devices with new simplified menu structure when you change the navcore to enable the full menu look. there is a work around by creating your own custom menu with free menu building software

connect the tomtom to your pc and use explorer to browse to the tom tom.
right click on the root folder and create a new folder and call it SdkRegistry.
This is case sensitive. Now copy the text below into notepad.

MENUBLOCK|BLOCK_MAIN|BTM_GPS_POSITION|
MENUPAGE|TASK_PAGE1|Hoofdmenu 1 van 3|
MENUITEM|TASK_NAVIGATE_TO|
MENUITEM|TASK_MENU_FIND_ALTERNATIVES|
MENUITEM|TASK_MENU_ROUTE_INSTRUCTIONS|
MENUITEM|TASK_MENU_DOWNLOAD|
MENUITEM|TASK_MENU_PREFERENCES|
MENUITEM|TASK_PAGE2|
MENUPAGE|TASK_PAGE2|Hoofdmenu 2 van 3|
MENUITEM|TASK_MENU_PLAN_ATOB|
MENUITEM|TASK_SHOW_MAP|
MENUITEM|TASK_DELETE_ROUTE|
MENUITEM|TASK_ADD_FAVORITE|
MENUITEM|TASK_MULTIMEDIA|
MENUITEM|TASK_PAGE3|
MENUPAGE|TASK_PAGE3|Hoofdmenu 3 van 3|
MENUITEM|TASK_MENU_PHONE|
MENUITEM|TASK_SHOW_GPS_STATUS|
MENUITEM|TASK_SET_COMPASS|
MENUITEM|TASK_ITINERARY|
MENUITEM|TASK_SWITCH_POI|
MENUITEM|TASK_PAGE1|
MENUBLOCK|BLOCK_PREF|BTM_GPS_POSITION|
MENUPAGE|TASK_PAGE4|Voorkeuren 1 van 6|
MENUITEM|TASK_SWITCH_NIGHTVIEW|
MENUITEM|TASK_CONFIGURE_POI|
MENUITEM|TASK_SET_HIDEMAP|
MENUITEM|TASK_SET_VOICE|
MENUITEM|TASK_SWITCH_SOUND|
MENUITEM|TASK_PAGE5|
MENUPAGE|TASK_PAGE5|Voorkeuren 2 van 6|
MENUITEM|TASK_SET_VOLUME|
MENUITEM|TASK_MAINTAIN_FAVORITES|
MENUITEM|TASK_CHANGE_HOME_LOCATION|
MENUITEM|TASK_MANAGE_MAPS|
MENUITEM|TASK_MAINTAIN_POI|
MENUITEM|TASK_PAGE6|
MENUPAGE|TASK_PAGE6|Voorkeuren 3 van 6|
MENUITEM|TASK_SET_STATUS|
MENUITEM|TASK_SWITCH_2D3D|
MENUITEM|TASK_ROTATE_DISPLAY|
MENUITEM|TASK_SET_COLOR_SCHEMES|
MENUITEM|TASK_SET_BRIGHTNESS|
MENUITEM|TASK_PAGE7|
MENUPAGE|TASK_PAGE7|Voorkeuren 4 van 6|
MENUITEM|TASK_SWITCH_BLUETOOTH|
MENUITEM|TASK_ABOUT|
MENUITEM|TASK_ASK_CHANGE_OWNER|
MENUITEM|TASK_SET_TOLL|
MENUITEM|TASK_MENU_TRAFFIC|
MENUITEM|TASK_PAGE8|
MENUPAGE|TASK_PAGE8|Voorkeuren 5 van 6|
MENUITEM|TASK_TUTORIAL|
MENUITEM|TASK_SET_NAME_DISPLAY|
MENUITEM|TASK_SET_DIST_UNITS|
MENUITEM|TASK_LEFTHANDED|
MENUITEM|TASK_SET_KEYBOARD_SIZE|
MENUITEM|TASK_PAGE9|
MENUPAGE|TASK_PAGE9|Voorkeuren 6 van 6|
MENUITEM|TASK_SET_LANGUAGE|
MENUITEM|TASK_SET_CLOCK_TYPE|
MENUITEM|TASK_SET_PLANTYPE|
MENUITEM|TASK_SWITCH_TIPS|
MENUITEM|TASK_RESET_SETTINGS|
MENUITEM|TASK_PAGE4|

Now save this as TomTom.mnu (not as a txt file).
When this is saved copy it into the folder SdkRegistry in the tomtom.

Open setconfig.txt and replace model:X40 with modelid:39
then a 15 reset en start the device.

norbert

mattman wrote:Got it working!!! TomTom Start upgraded to full NavCore 9 with sound working.

Did you try the simple procedure in post 5?

Hi,

I just bought a Tomtom Start2 and would like to know how to install a Western Europe map?

I ve tried to read forums and tutorials, but still not sure of the correct procedure to follow...

Can someone help me or direct me to a 'safe' place?


Tomtom config:

[TomTomGo]
DeviceName=TomTom START
DeviceVersionHW=START
BootLoaderVersion=55238
LinuxVersion=483784
ApplicationVersionVersionNumber=9051
ApplicationVersion=503855.2
CurrentMap=France
CurrentMapVersion=845.2645

clubino1 wrote:Hi,

I just bought a Tomtom Start2 and would like to know how to install a Western Europe map?

Internal memory = 1GB or 2GB?

Internal memory of 2GB.

What would be the steps to upload new maps on the Tomtom Start 2 - given that the memory size is sufficient?

THanks in advance!

clubino1 wrote:Internal memory of 2GB.

What would be the steps to upload new maps on the Tomtom Start 2 - given that the memory size is sufficient?

THanks in advance!

Go here: 860 maps with installer and Fast Activate Read the instruction carefully.

Select: Western_Europe_860.3120 1,67Gb

I will tri on a Start device

Kemys wrote:I will tri on a Start device

You will try what?

norbert51 wrote:connect the tomtom to your pc and use explorer to browse to the tom tom.
right click on the root folder and create a new folder and call it SdkRegistry.
This is case sensitive. Now copy the text below into notepad.

MENUBLOCK|BLOCK_MAIN|BTM_GPS_POSITION|
MENUPAGE|TASK_PAGE1|Hoofdmenu 1 van 3|
MENUITEM|TASK_NAVIGATE_TO|
MENUITEM|TASK_MENU_FIND_ALTERNATIVES|
MENUITEM|TASK_MENU_ROUTE_INSTRUCTIONS|
MENUITEM|TASK_MENU_DOWNLOAD|
MENUITEM|TASK_MENU_PREFERENCES|
MENUITEM|TASK_PAGE2|
MENUPAGE|TASK_PAGE2|Hoofdmenu 2 van 3|
MENUITEM|TASK_MENU_PLAN_ATOB|
MENUITEM|TASK_SHOW_MAP|
MENUITEM|TASK_DELETE_ROUTE|
MENUITEM|TASK_ADD_FAVORITE|
MENUITEM|TASK_MULTIMEDIA|
MENUITEM|TASK_PAGE3|
MENUPAGE|TASK_PAGE3|Hoofdmenu 3 van 3|
MENUITEM|TASK_MENU_PHONE|
MENUITEM|TASK_SHOW_GPS_STATUS|
MENUITEM|TASK_SET_COMPASS|
MENUITEM|TASK_ITINERARY|
MENUITEM|TASK_SWITCH_POI|
MENUITEM|TASK_PAGE1|
MENUBLOCK|BLOCK_PREF|BTM_GPS_POSITION|
MENUPAGE|TASK_PAGE4|Voorkeuren 1 van 6|
MENUITEM|TASK_SWITCH_NIGHTVIEW|
MENUITEM|TASK_CONFIGURE_POI|
MENUITEM|TASK_SET_HIDEMAP|
MENUITEM|TASK_SET_VOICE|
MENUITEM|TASK_SWITCH_SOUND|
MENUITEM|TASK_PAGE5|
MENUPAGE|TASK_PAGE5|Voorkeuren 2 van 6|
MENUITEM|TASK_SET_VOLUME|
MENUITEM|TASK_MAINTAIN_FAVORITES|
MENUITEM|TASK_CHANGE_HOME_LOCATION|
MENUITEM|TASK_MANAGE_MAPS|
MENUITEM|TASK_MAINTAIN_POI|
MENUITEM|TASK_PAGE6|
MENUPAGE|TASK_PAGE6|Voorkeuren 3 van 6|
MENUITEM|TASK_SET_STATUS|
MENUITEM|TASK_SWITCH_2D3D|
MENUITEM|TASK_ROTATE_DISPLAY|
MENUITEM|TASK_SET_COLOR_SCHEMES|
MENUITEM|TASK_SET_BRIGHTNESS|
MENUITEM|TASK_PAGE7|
MENUPAGE|TASK_PAGE7|Voorkeuren 4 van 6|
MENUITEM|TASK_SWITCH_BLUETOOTH|
MENUITEM|TASK_ABOUT|
MENUITEM|TASK_ASK_CHANGE_OWNER|
MENUITEM|TASK_SET_TOLL|
MENUITEM|TASK_MENU_TRAFFIC|
MENUITEM|TASK_PAGE8|
MENUPAGE|TASK_PAGE8|Voorkeuren 5 van 6|
MENUITEM|TASK_TUTORIAL|
MENUITEM|TASK_SET_NAME_DISPLAY|
MENUITEM|TASK_SET_DIST_UNITS|
MENUITEM|TASK_LEFTHANDED|
MENUITEM|TASK_SET_KEYBOARD_SIZE|
MENUITEM|TASK_PAGE9|
MENUPAGE|TASK_PAGE9|Voorkeuren 6 van 6|
MENUITEM|TASK_SET_LANGUAGE|
MENUITEM|TASK_SET_CLOCK_TYPE|
MENUITEM|TASK_SET_PLANTYPE|
MENUITEM|TASK_SWITCH_TIPS|
MENUITEM|TASK_RESET_SETTINGS|
MENUITEM|TASK_PAGE4|

Now save this as TomTom.mnu (not as a txt file).
When this is saved copy it into the folder SdkRegistry in the tomtom.

Open setconfig.txt and replace model:X40 with modelid:39
then a 15 reset en start the device.

norbert

Will Try that.....

I have tried the procedure above and don't work very well.

Tomtom Start 1EX00
32MB
Oficial and original nav. 9.057

I have created the folder: "SdkRegistry"
Ihave created the file: "TomTom.mnu" inside with the code.
Appears a new menu but don't have the option to navigate!!!

This devide don't have the setconfig.txt file.

Downunder35m wrote:Not sure if it works ok on a Start but you can try the 9.205, it is for the Rider but should work on your device too.
Make a backup using the Windows Explorer first!
[Please Register or Login to download file]
Password : downunder
Copy all files and folders from the archive to the root of your device/SD card.
It is best to have a device without a Navcore installed. Maps, voices and other personal stuff can stay on the device.
After the first start which can take a while the device will reboot once - that is normal and should not be interrupted.
There are no Loquendo voices included and I think it is best to use normal voices for the first try, you can experiment with TTS if everything else works fine.
If this Navcore is a no go for you too than you can only try the Dark Mireille version for the Start.

I have tried this on a START works very good, but no sound, and the GPS insists to configure the bluetooth headset and can y can not cancel....