Need help to calibrate my TT One

Hi
I have a TomTom One with 2GB and I have installed navcore 9.510 with Benelux 980-7895
The problem is when I start the tomtom it restart it self after some time, then I have to confirm the security and it start up again until it calculate the route but then it stop and restart again
It always worked fine, what can be the problem ?

It sounds like it is running out of memory as you're using a fully featured map on a 32MB device

Does your navcore have a built in swap file for 32MB devices?

Does this happen with 980 maps ? Because I never had this problem before !
I check the swap file and it is almost 16MB

No, it's nothing to do with 980 series maps...try a different Benelux map and see if it still happens

I can and will do that but one more thing, when I want to navigate then I have to give in the address or zipcode
When I give in the zipcode 3609 then I get on display 3698 and that is all because the 0 give the 9 and the 9 give the 8
This also happen when I give in the P then I get the O or the L give me the K
So I always get the next left number or letter
I don´t know how to explain it in a better English but I hope you understand me otherwise I can make a picture.
Because of this problem I was thinking about the navcore, maybe it is corrupt

sverige wrote:I can and will do that but one more thing, when I want to navigate then I have to give in the address or zipcode
When I give in the zipcode 3609 then I get on display 3698 and that is all because the 0 give the 9 and the 9 give the 8
This also happen when I give in the P then I get the O or the L give me the K
So I always get the next left number or letter
I don´t know how to explain it in a better English but I hope you understand me otherwise I can make a picture.
Because of this problem I was thinking about the navcore, maybe it is corrupt

I don,t think it is the navcore but you can alway,s try an other one
[Please Register or Login to download file]

Hi Holyhead, I format the TTOne and reinstall the Navcore which I have including the Benelux map and try it tomorrow but I still have the other problem
When I push the P on the screen then the O light up and the O is coming in the upperline next to Plaats (see picture)
Do you know how I can fix that ?

It need calibration, Hopefully if you use the other navcore it is allright if not you have to try something else.

Download and unpack
9.510 calib.zip
Read the 9.510_Calib.txt file

I did not download the navcore file because after I start downloading my AV 360 Total Security gave alarm and my PC was infected.
Therefor I use the one I have from you at the time of the Dutch site
I hope you understand that I am afraid to download the calibration file because it took me a day to clear the PC
Maybe I did something wrong so this is what I did : click the zippyshare link - wait for the new pop-up site and click download now
Then it went wrong and all kind of things runs over my screen and 360 came up with alarms.
I install Malwarebytes and remove a lot of malware but now malwarebytes block the download of the calibration file.
Hopefully you can help me out.

sverige wrote:I did not download the navcore file because after I start downloading my AV 360 Total Security gave alarm and my PC was infected.
Therefor I use the one I have from you at the time of the Dutch site
I hope you understand that I am afraid to download the calibration file because it took me a day to clear the PC
Maybe I did something wrong so this is what I did : click the zippyshare link - wait for the new pop-up site and click download now
Then it went wrong and all kind of things runs over my screen and 360 came up with alarms.
I install Malwarebytes and remove a lot of malware but now malwarebytes block the download of the calibration file.
Hopefully you can help me out.

The navcore has not a virus and I don,t know if that method
works. I have never tried it because my devices don,t need calibration.
The malware popups I got to the first thing I do is click them away.
It has something to do with Rapidshare but I don,t know what.
If you look at the side
[Please Register or Login to download file]
then there is a How to how to calibrate.You must be very patient and
long time ago I tried it for calibration for a Go 630. It did not
work out for me.

n.b.
You can try the file in post 8 again. This is a small file and if you click for downloading click the rest you got away.
Otherwise give me a email address by PM

Now I know the problem, when I click the zippyshare link then I have to wait and in the next screen I have to click the download now button BUT I have to wait until everything is completed as I can see in the left down corner of the screen otherwise I download a malware with all the bad things.
Now that I saw that I wait and when everything was ready I could click the "download now" button and everything works fine

I try to calibrate many times but it does not solve the problem.
Something happen because when I push the "P" I get the "P" but when I push the "-" I get the "." and when I push "terug" I get the "." and so on so it has been moved but not to the correct place
Do you know an other solution ?

To me, it seems like a calibration problem. You have to change the figures in the cal.txt file. On the motorfeeds site
you can read how. You have to do it in small steps. If this not works then the only way is to put a new touchscreen in the one. You can find them on Ebay. Even then I can guaranty that it works. On an old Go 630 it took me 3 screens before it finally was oke.

I open cal.txt and these are the numbers :
986 96 921 46 988 111 952 67 991 113 996 52 986 116 924 39 988 113 951 68 1007 136 975 94 988 118 953 66 986 110 948 73

After a hard reset I only see these : 92 917 108 878

So I delete the cal.txt and make a new one with the numbers 92 917 108 878 but that gave the same problem then I change many times until 102 917 108 878 and then it works fine (so far)
Thank you for your time and helping me.
Tomorrow I try to navigate and hopefully it will not restart again by it self.
I let you know.

sverige wrote:I open cal.txt and these are the numbers :
986 96 921 46 988 111 952 67 991 113 996 52 986 116 924 39 988 113 951 68 1007 136 975 94 988 118 953 66 986 110 948 73

After a hard reset I only see these : 92 917 108 878

So I delete the cal.txt and make a new one with the numbers 92 917 108 878 but that gave the same problem then I change many times until 102 917 108 878 and then it works fine (so far)
Thank you for your time and helping me.
Tomorrow I try to navigate and hopefully it will not restart again by it self.
I let you know.

Oke save your cal.txt somewhere. If you use an other navcore then you need the cal.txt

My TTOne need to be calibrate because when I push under in the L then I get the J and when I push above in the L then I get the U
My cal.txt have the following numbers 917 92 878 108
Can someone help me to explain which numbers I must change and up or down because I try some but it does not work

When I change 92 into 112 and restart the TT it does not work and when I restart TT and keep the on/off button then I get the black screen and then I see that Touchscreen calib.data does not change and is still 92 917 108 878