My tomtom starts then loads to a white screen with a light blue bar on the bottom.has anybody seen this before .Is my tomtom bricked?
I have tried numerous navcore and all the tricks and tips on this site with no success:
DeviceName=TomTom
DeviceVersionHW=xxxxx
DeviceSerialNumber=xxxx
DeviceUniqueID=AKxxxx
RamDiskVersion=20040301
BootLoaderVersion=5.5138
LinuxVersion=1000
ApplicationVersionVersionNumber=8010

Ok assuming your unit has 32 mb ram use this tutorial that i got written up just change the map to your required map, to update and then see where you stand,

[color="Red"]• Do a Backup before attempting any upgrade using windows explorer [/color]
• Connect the device to your pc and format it, as you have start up problems
• Download [Please Register or Login to download file] and copy the complete contents to your device, Overwiting when/If prompted
• Download SE_ttsystem.9.026.483454 and copy the contents to your Device overwriting when/If prompted
• Download your required map I will use the next map as an example you change it to whatever map you require [Please Register or Login to download file]
• When downloaded extract the files to a folder in the root of your device named [Please Register or Login to download file] .
• Download and extract Keygen 4.1D to a folder on your PC
• Download [color="Blue"]THIS[/color]meta.txt and copy it to your keygen folder overwrighting when prompted
• In the keygen folder run this file “Tomtom4.exe” (If you use vista or Win7, Right click and run as admin), In the keygen press button “Make map keys” > “Create DCT’s” This will write a .dct for all maps/voices/cams ect on your device.
• Shut down the keygen, Disconnect device, Reeboot device and you will have a working unit

Should i put everything on a sd card or the internal?

Garcon wrote:Should i put everything on a sd card or the internal?

That is totally up to you it doesnt matter either way but some people like to update the sd card and leave the internal intact

Did not work on the internal just get the splash screen the freezes up.I have to use reset pin to restart????

I have been at this for a week now tried original navacore form tomtom home and many navcore`s mostly 8 vers I get the same result.
Funny thing is after the navcore install I get no ttgo.bif file.
I am able to use my tomtom thru the home program "operate my Tomtom" but the piece of Sxxt WON`T start.

are you using the pre patchd ttsystem i give you above or a self patchd one ?

djc151084 wrote:are you using the pre patchd ttsystem i give you above or a self patchd one ?

the prepatched you gave me

I just tried putting SE_Navcore.9.026.483454.Basicpack.and the prepatched SE_ttsystem.9.026.483454 on to a Sd card ,used the clear flash.Does the same boots and goes to white screen..

Was this happening without your input? I mean before you tried to put a different Navcore on it or after that?
If the problem started after a new Navcore than you most likely installed it wrong.
The files for a Navcore always go in the root of the device/sd card - not into a folder.
Some archives contain a folder with the Navcore version number and in there all the files and folders for the Navcore. So better double check.

Downunder35m wrote:Was this happening without your input? I mean before you tried to put a different Navcore on it or after that?
If the problem started after a new Navcore than you most likely installed it wrong.
The files for a Navcore always go in the root of the device/sd card - not into a folder.
Some archives contain a folder with the Navcore version number and in there all the files and folders for the Navcore. So better double check.

Yes the issue started before I installed a new navcore.
I have installed many navcores before with no problems.
I think i am looking at a hardware issue.

Garcon wrote:Yes the issue started before I installed a new navcore.
I have installed many navcores before with no problems.
I think i am looking at a hardware issue.

Format the device [color="Red"](Backup first)[/color] install a new navcore and run the tomtom clear flash tool, if still no luck then i am sorry to tell you that it is an hardware issue.

djc151084 wrote:Format the device [color="Red"](Backup first)[/color] install a new navcore and run the tomtom clear flash tool, if still no luck then i am sorry to tell you that it is an hardware issue.

I have done that about 5 times with different navcore.
I think its nuked.

Garcon wrote:I have done that about 5 times with different navcore.
I think its nuked.

ok then sorry to say to you it is bad hardware , time for a new better unit

I agree ,might be a problem with the memory or the controller, either way not worth fixing it.:(