Tomtom 730   

Tomtom 730

Postby horsedentist » Mon Feb 27, 2012 6:46 pm

Hi guys
I hope one day to be in a position to post something other than questions on here but until I graduate:- After successfully upgrading my 710 I decided to get a little more bold I bought a 730 off ebay listed as "faulty just reboots on splash screen" I cleaned the internal drive and loaded up Downunder's 9400 which I have been using for the last few days and works flawlessly.
However I had got hooked on the Voice command function and my problem is that I have a TMC-RDS receiver and all the emu's on 9400 with voice command block the TMC function as they are looking for traffic on HD Live which I don't have.
What Navcore would you advocate for the 730 that will give me all the voice command functions but still allow me to use the TMC receiver.
Thanks in advance.
EC
horsedentist offline


Junior Member



 
Joined: Sat Jan 14, 2012 1:52 pm
Posts: 67
Has thanked: 0 time
Been thanked: 0 time

Postby fairytooth » Mon Feb 27, 2012 7:38 pm

why not try 8.398 and put the latest truck map on for a bit of fun
fairytooth offline


Junior Member



 
Joined: Wed Jan 05, 2011 3:19 pm
Posts: 66
Has thanked: 1 time
Been thanked: 1 time

Postby horsedentist » Mon Feb 27, 2012 9:18 pm

Well I wondered if there was anything newer than that but yes that is a possibility.
horsedentist offline


Junior Member



 
Joined: Sat Jan 14, 2012 1:52 pm
Posts: 67
Has thanked: 0 time
Been thanked: 0 time

Postby Downunder35m » Tue Feb 28, 2012 12:35 am

I use the 9.400 in X40 and the voice commands, but can't say anything about traffic as I don't use it (not that I could avoid traffic in the city though).
Forum rules

[Please Register or Login to download file]

If you find broken links or missing attachments in my postings, please send me PM
Password for all my files: downunder
Downunder35m offline


User avatar Elite Member



 
Joined: Wed Oct 21, 2009 4:44 am
Posts: 4250
Has thanked: 18 times
Been thanked: 572 times

Postby horsedentist » Tue Feb 28, 2012 1:13 pm

x40 unfortunately knocks out the tmc function will have to go to a lower navcore I think 8398 doesn't give you the voice command on the main screen. Would 9026 run on 730?
horsedentist offline


Junior Member



 
Joined: Sat Jan 14, 2012 1:52 pm
Posts: 67
Has thanked: 0 time
Been thanked: 0 time

Postby tendriver » Tue Feb 28, 2012 1:45 pm

I
horsedentist wrote:x40 unfortunately knocks out the tmc function will have to go to a lower navcore I think 8398 doesn't give you the voice command on the main screen. Would 9026 run on 730?


The issue isn't the navcore, it's the emu you are using. Voice command requires X40 or X50. X30 tmc doesn't function in X40 or X50. Bottom line is it's an either or situation, but not both.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Postby horsedentist » Tue Feb 28, 2012 3:48 pm

Ok put 8412 on run in x40 and got everything so any idea why it won't run on the 9400 x40? 9026 on 710 gives both so would 9026 work on 730?
EC
horsedentist offline


Junior Member



 
Joined: Sat Jan 14, 2012 1:52 pm
Posts: 67
Has thanked: 0 time
Been thanked: 0 time

Postby Downunder35m » Tue Feb 28, 2012 3:55 pm

He would not for my version ;)
There were some NC SE/X versions in the past that offered the hardware functions of the X30 emu in X40 too, but it only worked for the light sensor.
My version does not modify the hardware handles for the modes - it only "fools" the NC to think you have a device of the choosen emu. (simply speaking)
Why this affects the TMC functions in such a bad way is not kown to me.
Forum rules

[Please Register or Login to download file]

If you find broken links or missing attachments in my postings, please send me PM
Password for all my files: downunder
Downunder35m offline


User avatar Elite Member



 
Joined: Wed Oct 21, 2009 4:44 am
Posts: 4250
Has thanked: 18 times
Been thanked: 572 times

Postby horsedentist » Tue Feb 28, 2012 5:50 pm

It seems to be that 9400 x40 defaults to "live traffic" because when I tapped the traffic icon it kept saying " live services are not available" and when I plug the dual charger/tmc receiver in there is no traffic bar.
So:
Ok bit the bullet and loaded it up with 9026 and as far as I can tell without road testing everything seems to work except the light sensor. I can live without that as I can change it with a tap on voice command so no big deal will let you know how it performs and if it works ok on the road test.
horsedentist offline


Junior Member



 
Joined: Sat Jan 14, 2012 1:52 pm
Posts: 67
Has thanked: 0 time
Been thanked: 0 time

Postby horsedentist » Sun Mar 04, 2012 5:52 pm

Just an update after road testing the unit. Had some problems with 9026 TMC receiver just could not find a signal so tried 9150 se and hey presto everything works fine except light sensor and as I said I can change that with a quick tap on voice command so now a happy bunny got everything I wanted. Thanks a lot chaps.
horsedentist offline


Junior Member



 
Joined: Sat Jan 14, 2012 1:52 pm
Posts: 67
Has thanked: 0 time
Been thanked: 0 time

Postby tendriver » Sun Mar 04, 2012 6:40 pm

horsedentist wrote:so tried 9150 se and hey presto everything works fine except light sensor


What emu is 9150 set for??
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Postby horsedentist » Wed Mar 07, 2012 10:37 am

Sorry for the delay in replying have been working away.
To be truthful I am not sure (I am a bit new to this lark) I assume it is a modified 40? I used the navcore ; se 9150.564646 for 64mb devices which is self instaling and there does not appear to be a config file in it. I did not mess with anything in it after instal other than to create a ttgo.bak file and overwrite the TTS file with my old one and it works like a dream as is.
In fact I get a better lock on with my TMC receiver than I have ever had before so it seems to suit the device really well (it did take about 72 hours to lock on initially). Have voice command and every other function except light sensor. 885 UK/IRL map and 880 France map as I work over there.

If any one is playing with TMC receivers I have noticed that when you first instal them it some times takes a long time for them to lock on to a station in the first instance. However if you get the mctx file right after the first log on it creates a data file and then seems to log on ok there after. It may be worth saving the gns.dat file on your old navcore and transferring it after upgrade (I have not tried this yet) but it does seem that it needs this file to get a quick fix. Mine is now logging on to the station in my drive where as my old tomtom 710 never found a signal at home even with its proper navcore.
horsedentist offline


Junior Member



 
Joined: Sat Jan 14, 2012 1:52 pm
Posts: 67
Has thanked: 0 time
Been thanked: 0 time

Postby tendriver » Wed Mar 07, 2012 2:31 pm

horsedentist wrote:I assume it is a modified 40? I used the navcore ; se 9150.564646 for 64mb devices which is self instaling and there does not appear to be a config file in it.


1. Is there a Music icon in the unit's Main Menu? If Yes, download the attached model.txt file & copy it to the unit. Disconnect & reboot.
2. Has the Music icon changed to a Media icon? If so, go: Change preferences, Brightness preferences & check "Switch to night colors when dark". Your unit will now switch to night based on time rather than the light sensor.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Postby horsedentist » Wed Mar 07, 2012 11:26 pm

That's fixed it!
horsedentist offline


Junior Member



 
Joined: Sat Jan 14, 2012 1:52 pm
Posts: 67
Has thanked: 0 time
Been thanked: 0 time

Postby tendriver » Thu Mar 08, 2012 12:30 am

Thanx for the update.

THREAD_CLOSED
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times


Return to General Discussions about TomTom

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 12 guests