Blump3345 wrote:1. What is the difference between Loquento and Vocalizer?
2. How do I choose which type to install?

1. They are both computer voices. VocalizerTTS came first for the 32MB units. LoquendoTTS came on the scene with the roll out of 64MB units.
2. You don't have a choice. As I said Loquendo is a big problem for 32MB units.

tendriver wrote:1. They are both computer voices. VocalizerTTS came first for the 32MB units. LoquendoTTS came on the scene with the roll out of 64MB units.
2. You don't have a choice. As I said Loquendo is a big problem for 32MB units.

If I have the Vocalizer voices on my unit now, won't they still be there after new Navcore is installed? Or can I manually copy them back on after the new Navcor? I don't want a big problem.

It is always best to have full and working backup ;)

Blump3345 wrote:If I have the Vocalizer voices on my unit now, won't they still be there after new Navcore is installed? Or can I manually copy them back on after the new Navcor? I don't want a big problem.

Loading a new navcore will not affect Vocalizer voices already on the device. As Downunder stated, "It is always best to have full and working backup", just in case something else goes wrong.

hi all which truck navcore will work on my tomtom 550 t ? or which can i use to get the laytest maps to work ? i have tried different versions but when they work i have no menus ???

Please stop asking around like that.
We are here to help but by now you should have learned how to post a request properly.
There is only one Truck NC, so do your homework ;)

tendriver wrote:Loading a new navcore will not affect Vocalizer voices already on the device. As Downunder stated, "It is always best to have full and working backup", just in case something else goes wrong.

I played around with my ONE XL S for days trying all combinations of v9 SE and DSA Navcor's and played around with setconfig.txt in the SEs and I can't find any combination that lets the computer voice and RDS-TMC traffic work. I usually get one or the other working, but not both. I tried all the suggestions I found on here but still can't do it. It seems I have no choice but to stick with the 8.010 official version. Has anyone gotten any v9 to work on this unit with both computer voices and traffic?

i believe it is rather difficult to figure out which navore i need and or if i need to change the bootloader or not. Can someone give me a push in the right direction? i have tom tom go 910 thx

@Blimp: Not sure about your serial number but :
Version 8.081
(TomTom XL 30 Series with serial numbers starting with RM, RN, RO, RP, RV and ONE 30-Series with serial numbers starting with PN, PO, PP, PQ)

• Minor improvements

So maybe worth checking?

@zworba: any Navcore should work if installed correctly, your bootloader should be 5.5112 or higher.

ok thank you, so i pick the newest navcore then. i allso need an map of the BENELUX

i would pick

GO x10: (SD of 20GB) [64MB RAM] NC 8.562 SE

and map 875.3615


can i use more functions for my tomtom go910 after i installed this? or is its going to be faster or nicer looking? allso does the IQ routes or live functions allways need a subscription?

zworba wrote:ok thank you, so i pick the newest navcore then. i allso need an map of the BENELUX

i would pick

GO x10: (SD of 20GB) [64MB RAM] NC 8.562 SE

and map 875.3615


can i use more functions for my tomtom go910 after i installed this? or is its going to be faster or nicer looking? allso does the IQ routes or live functions allways need a subscription?

Navcore: 9.430.
Map: Benelux_885.4055 [95MB] OR
Benelux_885.4055 with Automatic Installer & Patcher
; Benelux 885_4055
CE 27 3B 36 38 62 F9 DB D7 A5 54 61 10 D8 AC 5F Benelux-524.meta

English ONLY, Please!!

i found the map however it gives an error

problem with map

you cannot use this map on this device: Benelux-524

i will run a config check and post it here

TTGO.BIF:
DeviceName=TomTom GO 910
DeviceVersionHW=GO 910
BootLoaderVersion=55022
ApplicationVersionVersionNumber=9430
ApplicationVersion=890926.2
CurrentMap=
CurrentMapVersion=0.0
TTGO.BAK:
Not Found...
TTGO.ORI:
Not Found...
TTNAVIGATOR.BIF:
Not Found...

zworba wrote:English ONLY, Please!!

i found the map however it gives an error

problem with map

you cannot use this map on this device: Benelux-524

i will run a config check and post it here

TTGO.BIF:
DeviceName=TomTom GO 910
DeviceVersionHW=GO 910
BootLoaderVersion=55022
ApplicationVersionVersionNumber=9430
ApplicationVersion=890926.2
CurrentMap=
CurrentMapVersion=0.0

You must patch the navcore & map. Go here: AutoActivate & FastActivate 1.8.8.5 Read the instructions, then select the FastActivate Premium version. Run FA P & click the first 3 buttons, 1 at a time, left to right. Disconnect & reboot.

thank you for you reply, that was the problem indeed. However the navcore suggested doesnt support music and pics. This is a shame since i have 20gig of internal memory. Anyone got a better suggestion or can you endulge me as to why this one is the best?

thx for your aidance!!!

zworba wrote:thank you for you reply, that was the problem indeed. However the navcore suggested doesnt support music and pics. This is a shame since i have 20gig of internal memory. Anyone got a better suggestion or can you endulge me as to why this one is the best?

thx for your aidance!!!

http://www.2shared.com/file/_bp-1ufn..._ttsystem.html Download this .rar. Copy the 2 files into your unit, overwriting the common file. Open the model.txt file with Notepad & change it to modelid:24. Disconnect & reboot.