please can someone help pls.....

Device: TomTom one 3rd edition ( it has the following numbers on it - N14644)

Problem:

i downloaded and installed an se navcore : SE_navcore.8.410.1218_32mb_Devices , as recomended in one of other posts.

after install, i disconected the usb wire, then started tomtom device.

device simply boots up and goes straight to telling me "no maps installed", did not even see the boot screen or anything!

device will not give me option to conect to pc .

i need to conect to pc to install maps!

what have i done wrong, can this be fixed....

i do have backup of previous tomtom, but cannot reinstall as the device will not connect to the pc, i know its not faulty wiring.

ps... the device does not hace a hole to reset it !

barny wrote:please can someone help pls.....

Device: TomTom one 3rd edition ( it has the following numbers on it - N14644)

Problem:

i downloaded and installed an se navcore : SE_navcore.8.410.1218_32mb_Devices , as recomended in one of other posts.

after install, i disconected the usb wire, then started tomtom device.

device simply boots up and goes straight to telling me "no maps installed", did not even see the boot screen or anything!

device will not give me option to conect to pc .

i need to conect to pc to install maps!

what have i done wrong, can this be fixed....

i do have backup of previous tomtom, but cannot reinstall as the device will not connect to the pc, i know its not faulty wiring.

ps... the device does not hace a hole to reset it !

TomTom disagrees.
[Please Register or Login to download file]

BTW, double posting is not good forum etiquette. Your other post has been deleted

barny wrote:please can someone help pls.....

Device: TomTom one 3rd edition ( it has the following numbers on it - N14644)

Problem:

i downloaded and installed an se navcore : SE_navcore.8.410.1218_32mb_Devices , as recomended in one of other posts.

after install, i disconected the usb wire, then started tomtom device.

device simply boots up and goes straight to telling me "no maps installed", did not even see the boot screen or anything!

device will not give me option to conect to pc .

i need to conect to pc to install maps!

what have i done wrong, can this be fixed....

i do have backup of previous tomtom, but cannot reinstall as the device will not connect to the pc, i know its not faulty wiring.

ps... the device does not hace a hole to reset it !

Do a hard reset, your device does have a reset button see tendrivers link or my pic below

• Hold reset for 30 seconds
• Hold on/off for 5 seconds (Untill you see the black config screen)
• Press reset once to turn off
• Turn on as normall with usb connected and your device will connect straight to your PC

sorry about double post tendriver - will not happen again .. .i think i paniced

yes you can reset tomtom using method on tomtom.com ... but this did not work ... still stuck with original problem

djc - my device does not have a reset hole,from tendrivers link i found out i have to hold on/off button until device restarts ... but still original problem there.,

i have now found out my device is - ONE (30 Series) / 125 / 130 - 512MB ... does that make a difference?

ok... manage to figure out ....

i had to keep device connected via usb ... then i did reset by holding on/off button until device restarted , but ....

now i keep getting windows pop asking me to do a scan disk and fix errors ... ? -0 why would that be happening EVERYTIME i conectect devic e to pc .. is it advisable to format and start again? if format which fs to format - fat 32 full format?? or quick format?

barny wrote:ok... manage to figure out ....

i had to keep device connected via usb ... then i did reset by holding on/off button until device restarted , but ....

now i keep getting windows pop asking me to do a scan disk and fix errors ... ? -0 why would that be happening EVERYTIME i conectect devic e to pc .. is it advisable to format and start again? if format which fs to format - fat 32 full format?? or quick format?

You can ignore that error that pops up, there is no need to scan the drive , [color="red"]DO NOT FORMATT THE DRIVE[/color]

barny wrote:i have now found out my device is - ONE (30 Series) / 125 / 130 - 512MB ... does that make a difference?

This does make a diffrence yes , your device has no reset pinhole but the on/off acts as the reset as you found out,

Also If i had known you had a ONE 125/130 i would have reccomend SE_Navcore.8.412.1236_32mb_devices.rar and NOT 8.410 , but if it is working now then there is no need to change

mmm.. too late i did fat format - is that gonna create a problem?

also is the a difference between tt one 3rd ed. and tt one 125/130?

barny wrote:mmm.. too late i did fat format - is that gonna create a problem?

also is the a difference between tt one 3rd ed. and tt one 125/130?

mm. it will not create a problem straight off, but formatting a tomtom device memory will shorten the life of it

One 125/130 was released in 2008 and looked like this -
1927


One v3 was released in 2007 and looks like this -
1926

barny wrote:mmm.. too late i did fat format - is that gonna create a problem?

also is the a difference between tt one 3rd ed. and tt one 125/130?

TT One 3rd Edition 3.5" screen, 32MB RAM Memory, no more than 1GB internal memory, no card slot.
TT One 125/130 3.5" screen, 32MB RAM Memory, 2GB internal memory, no card slot.

thank you very much guys for all your help and advice ...

have managed to install - SE_Navcore.8.412.1236_32mb_devices.rar with maps 855.2884.

seems a bit unstable, but will test for a while before deciding to keep or not...

when i say unstable . . i mean:-
1- every time i tap screen to make adjustments or to start navi, when screen goes back to map screen, for first few seconds no map is visible, then suddenly it appears.
2- i installed pgps cams, and when i was setting up to warn the sound stopped working
3- generally feels a bit jittery.


I am NOT complaining, just providing feed back. please dont be offended.

ps.. i no longer get a start up splash screen

wounder if these problems are specific to me?

barny wrote:thank you very much guys for all your help and advice ...

have managed to install - SE_Navcore.8.412.1236_32mb_devices.rar with maps 855.2884.

seems a bit unstable, but will test for a while before deciding to keep or not...

when i say unstable . . i mean:-
1- every time i tap screen to make adjustments or to start navi, when screen goes back to map screen, for first few seconds no map is visible, then suddenly it appears.
2- i installed pgps cams, and when i was setting up to warn the sound stopped working
3- generally feels a bit jittery.


I am NOT complaining, just providing feed back. please dont be offended.

ps.. i no longer get a start up splash screen

wounder if these problems are specific to me?

Is there a reason you are using 3rd party cams and not officiall tomtom ones ??
and dont worry about the missing splash, my nav runs in the same way

dunno realy???
have pda phone with tt navigator on it and have always used pgps cams as poi on that ... i suppose habbit really!

is there a way of getting the splash screens back maybe? - i did read (breifly, but now forgot where from!) from some other thread there there was a tool todoso? is it worth messing around with it?

barny wrote:dunno realy???
have pda phone with tt navigator on it and have always used pgps cams as poi on that ... i suppose habbit really!

is there a way of getting the splash screens back maybe? - i did read (breifly, but now forgot where from!) from some other thread there there was a tool todoso? is it worth messing around with it?

There is no such tool!!!!
For a splash screen from TT, go TTHome, Add Traffic, Voices etc, Images & Icons, Start-up images. To use a personal image, click "How do I create my own content" in the lower left corner of the Start-up images page.

barny wrote: from some other thread there there was a tool to do so? is it worth messing around with it?

Wich tool are you refering to,,, i can not recall anything other than tthome or manually adding them