Thu Aug 09, 2012 7:14 am
Hi
When i bought my Start it has NC 9.057 and NZ map 855.2884, then by your generous help i did upgrade
NC to 9.430 and NZ map to 885.4003. All good, many thanks, working ok, but there is a small "but" you maybe can help to sort it out.
Before the upgrade in the right bottom screen corner was displayed ( clockwise) :
Tiny Check "Finish" Flag
Arrival Time
Remain Distance
Time To Go
After the upgrade "Remain Distance" is gone - it's just an empty place now
This week friend of mine gave me his TT Start to do the upgrade: from NC 9.056 NZ map 855.2884 to the same i did for myself and after the upgrade his screen remains with no changes.
I have noticed in Backup Info file after doing a Back Up by TT Home my TT is tts and his Plus - just FYI if it's important.
My bootloader 55274 and his 55273.
I hope i explained myself, tell me if you need any other details
Thanks for advance
Thu Aug 09, 2012 8:28 am
What about Status bar preferences. Remaining distance is it been ticked.
Thu Aug 09, 2012 8:40 am
Thanks for reply, where do i have this menu ?
Thu Aug 09, 2012 6:51 pm
Wahwahjahjah wrote:1. This week friend of mine gave me his TT Start to do the upgrade: from NC 9.056 NZ map 855.2884 to the same i did for myself and after the upgrade his screen remains with no changes.
2. I have noticed in Backup Info file after doing a Back Up by TT Home my TT is tts and his Plus - just FYI if it's important.
1. Did you copy your setup to your friend's device?
2. FYI we never use TT Home for backups. Copy & paste is the preferred method.
Fri Aug 10, 2012 4:25 am
1. No, i did separately all procedures for each TT
2. Ok, will do it next time
So is there any way to fix it ?
Cheers
Fri Aug 10, 2012 5:38 am
Wahwahjahjah wrote:So is there any way to fix it ?
Does the bad unit have anything on it, that the good unit doesn't have, like custom pois, music, voices, etc?
If not try coping the good unit setup into the other unit.
Fri Aug 10, 2012 8:32 am
Ok, i'll try once i have this "good" unit from friend of mine
But now i remember how i did upgrade his unit:
Back Up mine ( the bad one ) by TT Home
Connect friend's ( the good one ) back it up ( move it from Back Up folder, then delete his TT content ) then use restore option by TT Home
Means his "good unit" using my current TT Back Up, you see ?
What folders of files should i check, as i have my few old Back Ups with "good" settings but again when i'm trying to copy them to my TT - still no remaining distance
Cheers
Fri Aug 10, 2012 9:02 am
I seems youz never checked the tutorials or any NC installation guides.
Otherwise you would not use Home for backup and restore as it always be incomplete.
Fri Aug 10, 2012 9:27 am
DeviceID=
DeviceVersionHW=START
DeviceSerialNumber=
ApplicationVersionVersionNumber=9430
TTSystem 4509075 bytes, modified 08/08/12 18:49
PNDNavigator 8144020 bytes, modified 08/08/12 19:23
BootLoaderVersion=55274
RDS/TMC 'mctx.dat' size 212 bytes
CurrentMap=New_Zealand_885_4003
CurrentMapVersion=885.4003
# - - - - - End - - - - - #
And i run a TT Clear Flash Tool few times, still the same....
Thanks for Your help
Fri Aug 10, 2012 4:27 pm
Downunder35m wrote:I seems youz never checked the tutorials or any NC installation guides.
Otherwise you would not use Home for backup and restore as it always be incomplete.
He was made aware of this in post 4 & replied that he understood in post 5.
Fri Aug 10, 2012 11:46 pm
Post #7 and #9 indicate to me that he did not read any of it.
Apart from that the Start NC in standard emulation is pretty limited to what is shown - on the screen and the menu.
And it should be clear that a new Navcore will often affect the appearance of the device, same for modifying options that are hardcoded into the NC.
Sat Aug 11, 2012 12:10 am
tendriver wrote:He was made aware of this in post 4 & replied that he understood in post 5.
Downunder35m wrote:Post #7 and #9 indicate to me that he did not read any of it.
Apart from that the Start NC in standard emulation is pretty limited to what is shown - on the screen and the menu.
And it should be clear that a new Navcore will often affect the appearance of the device, same for modifying options that are hardcoded into the NC.
In post 7 he is explaining what he did PRIOR to post 1. Post 9, who knows!!
Sat Aug 11, 2012 12:59 am
Sorry, only now i understand that "he" in both your posts is "me"
"Post 9, who knows!!" - again misunderstanding, i just treat your signature as the way to figure it out my current TT settings
Does it mean someone is about to help here or nothing to do ?
Cheers
Sat Aug 11, 2012 5:50 am
As said earlier, the Start is pretty limited in what is on offer in the menu and the screen.
Since it is only a small screen TT limits the output to the status bar.
Only otion to get everything would be to use a different emulation, otherwise you have to accept some limitations - it is one of the cheapest models ;)
Sat Aug 11, 2012 6:42 am
No worries, thanks for your help anyway, i'll let you know if i'll get any further progress
Cheers
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.