Truck Navcore 8.398 for X50 devices testers wanted

It is not the GNS or map folder, the "drivers" used are often device specific.
That's wha I said you need all files with "rds" and TMC" in it - have you checked the root and the folder "bin" as well?

worked very good for me on my 550,i did not have to wait 5 minutes.started very quickly
the only problem is that you all know,you have to press the shut down button for 15 seconds
THANK YOU VERY MUCH!!!!

An alternative shutdown method I would personally recommend for the x50's is going through Change preferences/Battery saving preferences and untick Device stays on when external power is lost thus it will switch itself off after 10 seconds. Some report that pressing the power button down for 20-30 seconds also works but I've found this just puts it in sleep mode and therefore still drains the battery.

the best method to shut down is to etract the memory card and after that shut down your device

costell wrote:the best method to shut down is to etract the memory card and after that shut down your device

If you do this you WILL corrupt the MicroSD card for sure!

Never, ever remove a memory card with the unit switched on!!

Go through Change preferences/Battery saving preferences and untick Device stays on when external power is lost thus it will switch itself off after 10 seconds.

ok,thank you!but i did that many times and nothing happened

costell wrote:ok,thank you!but i did that many times and nothing happened

If you have "Switch off when external power is lost" screen, ensure that it [color="#FF0000"]IS[/color] ticked. You should, after disconnecting, get a 10 secs countdown

sorry all i am not used to all these options i just bought a 950 to replace my 520 truck. and i am a coach driver and want the truck system on my 950 i have downloaded this navcore that people seem to say works for 950 but i cant get anything to work. do i need download a map and other things also. which one? and how do i get on it as the ones on the site seem take me to a downloader managment thing. so can some one just post me links to what else i need to have with this navcore on my sd card... thank you

kieranja wrote:sorry all i am not used to all these options i just bought a 950 to replace my 520 truck. and i am a coach driver and want the truck system on my 950 i have downloaded this navcore that people seem to say works for 950 but i cant get anything to work. do i need download a map and other things also. which one? and how do i get on it as the ones on the site seem take me to a downloader managment thing. so can some one just post me links to what else i need to have with this navcore on my sd card... thank you

Password; navitotal

Europe_TRUCK_880_3845OR
Europe_TRUCK_880_3845 with Automatic Installer & Patcher

Scroll toward the bottom of the LinkSave.in page, that opens, until you see "The visitorpassword that you have entered is wrong" notice.
Below this notice, is a gray box titled Visitorpassword. Type navitotal in the gray box & click enter. The download link/links will be at the bottom
of the page that opens. Use the single downward pointing arrow under the word "Download" to download the map.

so i put the map stright on to sd card then add the navcore onto it and then that is it? all should work?

i click on down arrorws then that takes you to file factory then there no down load links there to click :S

kieranja wrote:i click on down arrorws then that takes you to file factory then there no down load links there to click :S

Scroll to the bottom of the filefactory page an left click on the big red & white slow download button.

thank you so once i done all the part down loads what do i do then it got be more work than just copying the navcore into the same file lol

kieranja wrote:thank you so once i done all the part down loads what do i do then it got be more work than just copying the navcore into the same file lol

Use Winrar to click on Part 1. Winrar will unzip part 1 & all of the other parts at the same time. More instructions are in post 1.

I have read the first post over and over and wa I can garther un zip files from map. Then extract the files from this nav orr into same file and that should be that. But post 2 goes on about a boot number he using. What's that? Do I need?