iGO Primo Speed Camera Installation and Enabling


1. Download Speed Camera txt file from here – http://www.navitotal.com/showthread....7-2012-for-iGO
2. Insert downloaded Speed Camera txt file in to Speedcam folder on the iphone. *You can do this by downloading a free program called iFunbox (google)
3. Once you have installed iFunBox and plugged your iPhone in, under the iFunbox Classic Tab go to
‘Raw File System’ – ‘var’ – ‘mobile’ – ‘Applications’ – iGO World – iGO World – content – Speedcam
4. Lastly you have to edit your sys.txt file, to do this go to ‘Raw File System’ – ‘var’ – ‘mobile’ – ‘Applications’ – iGO World – iGO World – look for the last file sys.txt – Extract to PC – open sys.txt file and add the following text (please be advised that you may or may not need all these extra commands, however, this is what has worked for me)


[folders]
secondary_app="../Documents/"

[3d_config]
disable_roadsign_navigation_mode=1
use_all_building_textures=1
fade_distance_for_car=0
fade_distance_for_guidance_arrow=0
fade_overlap_tolerance=0

[debug]
skip_eula=1
experimental_features=1

[dynamiccompressor]
a0=56806
compressor=1
gain=12
ratio=9
thrs=24703

[feature]
signpost_coloring=1
text_guidance=1

[gps]
port="0"
baud="57600"
delay_after_pos_valid="1000"
delay_after_pos_invalid="1"
disable_advanced="0"
set_messages="0"

[interface]
laneinfo_signpost_enabled=1
signposts_without_laneinfo=1

[map]
show_labels=1
show_oneway=1
textured_poly=1
alternative_roadnames=1

[navigation]
autoreplan_action="AUTO"
gps_pos_to_road=1

[network]
available=1

[poi]
sort_icons=0
use_multi_poi_icon=0
multipoi=1

[route]
auto_enable_crossborder=1
allow_offroad_waypoints=1
has_carpool=0

[sound]
use_method=1
queue_length=200
os_volume=255
sound_volume=255
voice_volume=255
use_os_volume=0
dynamic_volume_type=0
auto_mute=0
voice_muted=0
os_muted=0
sound_muted=0
ding=0
pause_mp3_sooner=1
csv_voice_enabled=1

[sound.announcer]
gps_signal_lost="0"
gps_disconnected="0"

[tmc-http]
enabled=1

[tts]
tts_buffer=43008
announce_exit_directions=3
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=1

[warning]
speedcam_enabled=1
speedcam_visualtype=1
speedcam_warning=1
speedcam_soundtype=2
speedcam_maxdistance_from_road=20
speedcam_max_lookahead=500
speedcam_max_angle=45
speedwarn_toltype=1
speedwarn_alt_toltype=1
speedwarn_alt_tolerance=100
speedwarn_tolerance=100
warn_distances="120:500,110:460,100:420,90:380,80: 340,70:300,60:26 0,50:220,40:180,30:140,20:100"
approach_beep_distances="50,90,150,250"


5. Save the text file (keeping the name) and place back in the same place that you got it from on the iPhone, Restart iPhone and launch iGO – You will get a message on start up saying that "Cameras are on by default if this is not allowed in your country please click to disable" (or something like that) depending on what device / map you are using I suppose?

*Please note there are no settings in the application itself to switch the cameras on and off and the only time that you will know they are working is when the little camera icons appear when you are near speed cameras.

Enjoy

Very nice marcy99! I did pretty much what you wrote to get my speedcams working on my iphone 5. Although I get the visual icons on the map, there is no audio such as "red light camera." I'm assuming that it's the same as the TTS that you can't get on the iphone. Unless I'm wrong. If you did get the audio, please tell how. Thanks.