tendriver wrote:Is the SDHC card a good quality major brand, like Kingston, Sandisk, ETC?
With the new setup on the 4GB card, please run this little program & post the results here. tomtom-tools-f127/tomtom-current-configuration-2011-t7501.html

yes the sd is a SanDisk Ultra 4GB SDHC

Just to give more info the Fast gives these infos after run:

BIF file .... e:\TTGO.BIF
KeyGen Type : 8
Device Name : TomTom Go
Application 7903
Bootloader 48600
Device ID AK.....
Storage size 3775MB free 2378MB

The tomtom-current-configuration gives this (with the new SD and new conf in the pc as if I put the SD in the tomtom it does not read the sd and ask to format it):

TTGO.BIF:
DeviceName=TomTom GO
DeviceVersionHW=GO
BootLoaderVersion=48600
ApplicationVersionVersionNumber=7903
ApplicationVersion=9183
TTGO.BAK:
Not Found...
TTGO.ORI:
Not Found...
TTNAVIGATOR.BIF:
Not Found...

while if I put the old SD old conf I have:

TTGO.BIF:
DeviceName=TomTom GO
DeviceVersionHW=GO
BootLoaderVersion=55128
ApplicationVersionVersionNumber=7903
ApplicationVersion=9183
TTGO.BAK:
Not Found...
TTGO.ORI:
Not Found...
TTNAVIGATOR.BIF:
Not Found...

Is the BootLoaderVersion the problem?

But if I check the BootLoaderVersion on the TomTom (without the SD by pressing the start/stop more then 5sec) is
s5.5128 clist#300688RVCT

Your GO creates a full new ttgo.bif file EVERYTIME it is booted. The info on the old card is of very limited use.

tendriver wrote:Your GO creates a full new ttgo.bif file EVERYTIME it is booted. The info on the old card is of very limited use.

then what does this means? there is no solution?

lukesw74 wrote:then what does this means? there is no solution?

It was meant to be just an advisory, nothing more.

tendriver wrote:It was meant to be just an advisory, nothing more.

ok but then how I solve my issue? how do I put the 4GB with the new map on my Tomtom? do you know a solution?

lukesw74 wrote:1- copied the ttgo.bif in the old SD OK
2- installed navcore 9.510 for Go on old SD OK
3- copied the old map Western_Europe_1GB_815.2024 to the old SD
4- copied the bootloader
- put the old SD in Tomtom and everything is ok, Go starts well and have this parameter:
- App 9.510.
- 32Mb ram
- Boot 5.5128
- Map Western_Europe_1GB_815.2024

1- OK
2- Has 9.510 been patched for this setup?
3- Has 815.2024 been patched for this setup?
4- OK

tendriver wrote:1- OK
2- Has 9.510 been patched for this setup?
3- Has 815.2024 been patched for this setup?
4- OK

2- Has 9.510 been patched for this setup? YES, installed on old SD and patched
3- Has 815.2024 been patched for this setup? NO, was already pateched and working on the ols SD with old navcore, do I have to re-patch when I install the map on the new navcore?

lukesw74 wrote:2- Has 9.510 been patched for this setup? YES, installed on old SD and patched
3- Has 815.2024 been patched for this setup? NO, was already pateched and working on the ols SD with old navcore

OK, I want you to copy this working setup from the old sd exactly as it is and paste it onto the new card exactly as it is. Give it a GO.

tendriver wrote:

lukesw74 wrote:2- Has 9.510 been patched for this setup? YES, installed on old SD and patched
3- Has 815.2024 been patched for this setup? NO, was already pateched and working on the ols SD with old navcore

OK, I want you to copy this working setup from the old sd exactly as it is and paste it onto the new card exactly as it is. Give it a GO.

to check if I got it, I copy on the new 4Gb SD card all the files that I have on the old SD with this configuration:

- navcore 9.510 for GO on old SD and patched (on the old SD)
- the old map Western_Europe_1GB_815.2024

I will be travelling for businness till Sunday, I will try it on Sunday and post the result

lukesw74 wrote:to check if I got it, I copy on the new 4Gb SD card all the files that I have on the old SD

Yes. Copy onto the new BLANK 4Gb SD card all the files that you have on the old SD.

tendriver wrote:

lukesw74 wrote:to check if I got it, I copy on the new 4Gb SD card all the files that I have on the old SD

Yes. Copy onto the new BLANK 4Gb SD card all the files that you have on the old SD.

here I am ... tested:

used the file on the old SD as we said, copied them in the new SD and is not working... the Tomtom remain blocked on the screen that ask to insert the SD....

retested on the old SD on is working

lukesw74 wrote:retested on the old SD on is working

OK, please post the ttgo.bif file that was generated when you did this retest.

tendriver wrote:OK, please post the ttgo.bif file that was generated when you did this retest.

here it is:

[TomTomGo]
DeviceName=TomTom GO
DeviceVersionHW=GO
DeviceSerialNumber=XXXXXXXXXXXX
DeviceUniqueID=XXXXX XXXXX
RamDiskVersion=20130404
BootLoaderVersion=55128
LinuxVersion=547200
ApplicationVersionVersionNumber=9510
ApplicationVersion=1234792.1
UserLanguage=Italiano
UserName=
LastConnectionTime=Never
GPSFirmwareVersion=2.4.12.09-XTomTom2.0-C1EVAL1.0 0000003729
CurrentVoiceInfo=Jane
CurrentMap=Western_Europe_1GB_815.2024
CurrentMapVersion=815.2024

Thanks

lukesw74 wrote:BootLoaderVersion=55128

I can only conclude that you have a bad SDHC card. Do you have any other devices [camera etc.] that you can test it with? Or a mate that has a device that you can use.

tendriver wrote:

lukesw74 wrote:BootLoaderVersion=55128

I can only conclude that you have a bad SDHC card. Do you have any other devices [camera etc.] that you can test it with? Or a mate that has a device that you can use.

yes, tested into a camera Canon EOS, took some pictures everything is fine, in the PC I can read the SD and the photo as well.....SD seems working good