TomTom Go 730 Australia map 905.4754

Updated the navcore to 9.465
Tried putting the map 905.4754 but not working.
I used fast activate to patch everything.
Still nothing.
Error is the typical red light message You cannot use this map for this GPS : Australia-710 (referring to the meta)
Is the map incompatible with my device?
Thanks!

Map and Navcore are correct.
You can check if the map is activated by confirming you have .dct file with the name of the map inside the map folder.
If so, you have to patch the Navcore.

Downunder35m wrote:Map and Navcore are correct.
You can check if the map is activated by confirming you have .dct file with the name of the map inside the map folder.
If so, you have to patch the Navcore.

@ rahulshankar

If you have not patched the 9.465 navcore, then download, unzip & copy this pre-patched SE ttsystem file into your 730 overwriting the current 9.465 ttsystem file: 9.465 SE ttsystem.rar
This SE file is defaulted to emu X40. If you prefer emu X50, then also download unzip & copy the attached model.txt file into your 730.

Thanks a lot tendriver. That ttsystem file did the job.
For some reason it wasn't getting patched with fastactivate downunder35m. Not sure why exactly?

Ok another problem. It keeps trying to acquire a GPS signal but can't. It just keeps trying, so it can't plot anything. I'll try the whole leave it on for an hour and see if it works, but on previous upgrades it connected right off the bat.

rahulshankar wrote:Ok another problem. It keeps trying to acquire a GPS signal but can't. It just keeps trying, so it can't plot anything. I'll try the whole leave it on for an hour and see if it works, but on previous upgrades it connected right off the bat.

Boot, then reboot several times.

Im having the same problems but even after doing as above stilll comes out the 'you cannot use this map-710. can anybody help me?? i got this from a friend.

[TomTomGo]
DeviceName=TomTom GO 730
DeviceVersionHW=GO 730
DeviceSerialNumberJ------
DeviceUniqueID=AK--------
RamDiskVersion=20130404
BootLoaderVersion=55120
LinuxVersion=842337
ApplicationVersionVersionNumber=9510
ApplicationVersion=1234792.1
UserLanguage=English UK
UserName= [(deleted by mod)]
LastConnectionTime=Never
GPSFirmwareVersion=#GSW3.2.4TT_3.1.00.12-C35B1.02
CurrentVoiceInfo=Jane
CurrentMap=
CurrentMapVersion=0.0

adewy91 wrote:Im having the same problems but even after doing as above stilll comes out the 'you cannot use this map-710.

You must patch the navcore and map with this tool: >>FastActivate<<.

adewy91 wrote:Im having the same problems but even after doing as above stilll comes out the 'you cannot use this map-710. can anybody help me?? i got this from a friend.

[TomTomGo]
DeviceName=TomTom GO 730
DeviceVersionHW=GO 730
DeviceSerialNumberJ------
DeviceUniqueID=AK--------
RamDiskVersion=20130404
BootLoaderVersion=55120
LinuxVersion=842337
ApplicationVersionVersionNumber=9510
ApplicationVersion=1234792.1
UserLanguage=English UK
UserName= [(deleted by mod)]
LastConnectionTime=Never
GPSFirmwareVersion=#GSW3.2.4TT_3.1.00.12-C35B1.02
CurrentVoiceInfo=Jane
CurrentMap=
CurrentMapVersion=0.0

The lack of any map data tells us that your map has not been patched. Mr. Anderson's post is on the right track.

Thanksss it worked liked a charm! i must have used a old fastactivate the previous times. =)

adewy91 wrote:Thanksss it worked liked a charm!

You are Welcome. Thanx for the update!