GO 300 - Will NAVCORE 9 work?

Hi, My Dad has a TT GO300 Will Ver.9 Navcore work on it?

I have a 2Gig SD card.

Thanks in advance

Most likely not to your satisfaction.
The 300 has only 32mb but to make things worse only a very slow CPU.
IMHO a good choice for a Go300 is the 8.412 of the 8.414.
I posted a 8.414 with support for TTS not long ago, might be working ok.
If worse comes to worse you'd have to remove the folders "ASR" and LoquendoTTS" to speed things up.

Another option is navcore 9.205 for the Rider 3, which is a 3.5" 32MB motorcycle device.

All sound advice, I will check out them both to get a feel for the best one, I only want to use the latest map for the UK - but if a NavCore could work then I am all for giving it a go.
Thanks DownUnder35 and Tendriver

tendriver wrote:Another option is navcore 9.205 for the Rider 3, which is a 3.5" 32MB motorcycle device.

Thanks, that has worked for me. 2 questions though..

UK Map 875.3613 isn't recognised but 860.3100 is. Would you know why?

SD max capacity 2Gb with original bootloader 5.5259, can you advise which is best to use for SDHC compatibility plse?

fairytooth wrote:Thanks, that has worked for me. 2 questions though..

1. UK Map 875.3613 isn't recognised but 860.3100 is. Would you know why?

2. SD max capacity 2Gb with original bootloader 5.5259, can you advise which is best to use for SDHC compatibility please?

1. Did you update the keygen meta.txt to include the 875 maps?
2. 5.5259 supports SDHC cards.

tendriver wrote:1. Did you update the keygen meta.txt to include the 875 maps?
2. 5.5259 supports SDHC cards.

Yes I thought so but will check again.
Weird, I thought so too but it doesn't. Very strange
Thanks for your replies.

fairytooth wrote:Yes I thought so but will check again.
Weird, I thought so too but it doesn't. Very strange
Thanks for your replies.

If this is in response to #2 in post 6, all bootloaders, 5.5015 & higher, support SDHC cards.

fairytooth wrote:SD max capacity 2Gb with original bootloader 5.5259

To me, original means what was on the device when it was bought. It wasn't 5.5259. Are you sure 5.5259 is the current installed bootloader?

tendriver wrote:If this is in response to #2 in post 6, all bootloaders, 5.5015 & higher, support SDHC cards.



To me, original means what was on the device when it was bought. It wasn't 5.5259. Are you sure 5.5259 is the current installed bootloader?

Well, the full answer is that it was on the device when I was given it but I had no reason to think that it had been updated. Not to worry I will persevere with it and post an update if I fix it. Many thanks for your help tendriver.

fairytooth wrote:Well, the full answer is that it was on the device when I was given it but I had no reason to think that it had been updated. Not to worry I will persevere with it and post an update if I fix it. Many thanks for your help tendriver.

Thanx for the update.

Tomtom GO 300 works with SE_Navcore.9.160.567967 (TESTED)

I just replace the old files with the new Navcore

Thanks

Is there any bootloader for TT GO 300, to support SDHC card 4GB? Anybody tried?

esko.jukic wrote:Is there any bootloader for TT GO 300, to support SDHC card 4GB? Anybody tried?

ANY b/l 5.5015 or higher supports SDHC cards of ANY size, unless your current b/l is 1.0100 or 1.0200!!!

And there is more info about that in the tutorial section...

tendriver wrote:ANY b/l 5.5015 or higher supports SDHC cards of ANY size, unless your current b/l is 1.0100 or 1.0200!!!

Yes, i know that, i jus asked here, to be sure which one to try, i'm afraided to try it before ask here is somebody who tried some of 5.xxx bootloaders on TT GO 300, cause i know that's danger to play with bootloaders, and that can't be downgraded from higher to lower version, once we updated it...

Thanks for info!

Downunder35m wrote:And there is more info about that in the tutorial section...

Yes, downdy, i read it for sure before posting in this thread, but like i wrote above in reply to 10driver, just want to be sure, to avoid some new problems .