One 3rd edition   

One 3rd edition

Postby Gman4MF » Mon Nov 17, 2014 2:17 am

Yep, it's ancient, my One 3rd edition, but it will suffice... :004:
It's been a while since it was updated but it's badly needed...
Hopefully all i need to do is get the right/best/fastest navcore & latest map for Benelux

Would i be able to run navcore 9 or would that be overkill ?
And if so which one ? :017:

I have downloaded "UNCI.exe" (Universal Navcore Installer) :024:
but i'm not shure if i should use it...
Any help/suggestions welcome...
Thnx in advance :023:

Current setup on my One v3
Navcore version 8.410 1218/090213
OS: 286217
GPS v1.20
Boot 5.5001
Map: Benelux v830.2305
Last edited by Gman4MF on Mon Nov 17, 2014 8:50 pm, edited 2 times in total.
Gman4MF offline


User avatar Junior Member



 
Joined: Sun Nov 16, 2014 11:52 pm
Posts: 13
Has thanked: 3 times
Been thanked: 0 time

Re: One v3

Postby tendriver » Mon Nov 17, 2014 3:04 am

Gman4MF wrote:1. Would i be able to run navcore 9 or would that be overkill ? And if so which one ?
2. I have downloaded "UNCI.exe" (Universal Navcore Installer) but i'm not shure if i should use it...
3. latest map for Benelux

Welcome to Navitotal.

1. Yes.
2. Yes, you can use it. The 9.510 version has been modded, so the 32MB units can use it.
3. [Please Register or Login to download file] [111MB] OR
[Please Register or Login to download file]
; Benelux v935.5753
04 37 9A 38 E1 FA 63 FA 73 86 40 21 FF 81 6A 43 Benelux-100104.meta

4. DO US BOTH A FAVOR. READ THE UNCI POST 1 INSTRUCTIONS SEVERAL TIMES BEFORE YOU START.
I do not give help by PM. It deprives our other members of a chance to learn. Please post your issue in the appropriate forum/thread. You will get an answer.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Re: One 3rd edition

Postby Gman4MF » Mon Nov 17, 2014 10:03 am

Thnx ! :023:
Ok, already backed up the contents of my One v3 (copied all to my laptop)
1.
Read the unci post and after formatting the TomTom
i figure i need to copy the "voice"-folder and ttgo.bif back to the TT ?
I guess computer voices won't work on my Onev3 but i would be happy to keep my current voices...
2.
maybe a stupid question but isn't there a way/tool that can generate a meta for the recent 9.40-version maps ?
Or can that only be done with already activated maps? Did some reading but don't kow exactly how that works... :003:
3.
if i use the suggested 935-maps-version do i need to create a meta.txt in the Benelux folder containing the code you posted with the links ? or how do i use/integrate that meta-code ?
Last edited by Gman4MF on Mon Nov 17, 2014 8:51 pm, edited 1 time in total.
Gman4MF offline


User avatar Junior Member



 
Joined: Sun Nov 16, 2014 11:52 pm
Posts: 13
Has thanked: 3 times
Been thanked: 0 time

Re: One v3

Postby tendriver » Mon Nov 17, 2014 12:46 pm

Gman4MF wrote:1. Read the unci post and after formatting the TomTom
1b. i figure i need to copy the "voice"-folder and ttgo.bif back to the TT ?
1c. I guess computer voices won't work on my Onev3 but i would be happy to keep my current voices...
2.maybe a stupid question but isn't there a way/tool that can generate a meta for the recent 9.40-version maps ? Or can that only be done with already activated maps? Did some reading but don't kow exactly how that works...
3. if i use the suggested 935-maps-version do i need to create a meta.txt in the Benelux folder containing the code you posted with the links ? or how do i use/integrate that meta-code ?

1. Navitotal NEVER suggests formatting anything, except in the most severe cases.
1b. Correct.
1c. This is addressed in THE UNCI POST 1 INSTRUCTIONS.
2. A user can generate a meta code with FastActivate only for a map that the user has bought from TT.
3. No. ALL of the 935 meta codes are already included in the Integrated Meta.txt, that is in the downloaded FastActivate package. We post the meta codes with the maps, so members will know that the map is usable.
I do not give help by PM. It deprives our other members of a chance to learn. Please post your issue in the appropriate forum/thread. You will get an answer.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Re: One 3rd edition

Postby Gman4MF » Mon Nov 17, 2014 2:22 pm

Followed instrfuctions to the letter...
It says after reset & reboot (translated from Dutch)

"Problem with Map
You can not use this map
on this navigation system:
Benelux-100104
"

:hunter:

[EDIT]
I did the latest fastactivate thing and now it seems to work well
Thought activation was included, but ok, i kinda figured it out ;)

Now i will try to activate my preferred voice because it only does the old standard voice and i forgot how to add/change it...
I copied all the voices i had, but they don't seem to be recognised.
Maybe some skins too...
Any pointers are more than welcome

Thnx for the help so far :023: :024:
Last edited by Gman4MF on Mon Nov 17, 2014 8:51 pm, edited 3 times in total.
Gman4MF offline


User avatar Junior Member



 
Joined: Sun Nov 16, 2014 11:52 pm
Posts: 13
Has thanked: 3 times
Been thanked: 0 time

Re: One v3

Postby [DaY]BooM » Mon Nov 17, 2014 2:56 pm

Gman4MF wrote:Followed instrfuctions to the letter...
It says after reset & reboot (translated from Dutch)

"Problem with Map
You can not use this map
on this navigation system:
Benelux-100104
"

:hunter:


follow this link http://www.navitotal.com/tomtom-tools-f127/albert-easyactivator-t12699.html
it's giving that error because your map is not patched or ttsystem file.

EDIT: run as admin then once it's running from navigator then click on "ACTIVETE ALL MAPS AND POI'S" one finish that click on "PATCH NAVCORE" that's it, try and let us know.
Last edited by [DaY]BooM on Mon Nov 17, 2014 3:00 pm, edited 1 time in total.
SEND ME PRIVATE MESSAGE IF ANY MY LINK IS DEAD.
PreSS ThAnKs BuTToN iF i HelpeD YoU.
[DaY]BooM offline


Junior Member



 
Joined: Tue Nov 04, 2014 7:22 pm
Posts: 53
Has thanked: 1 time
Been thanked: 338 times

Re: One 3rd edition

Postby Gman4MF » Mon Nov 17, 2014 2:59 pm

I did the latest fastactivate thing and now it seems to work well
Thought activation was included, but ok, i kinda figured it out ;)

Now i will try to activate my preferred voice because it only does the old standard voice and i forgot how to add/change it...
I copied all the voices i had, but they don't seem to be recognised.
Maybe some skins too...
Any pointers are more than welcome

Thnx for the help so far :023: :024:
Last edited by Gman4MF on Mon Nov 17, 2014 8:52 pm, edited 1 time in total.
Gman4MF offline


User avatar Junior Member



 
Joined: Sun Nov 16, 2014 11:52 pm
Posts: 13
Has thanked: 3 times
Been thanked: 0 time

Re: One v3

Postby [DaY]BooM » Mon Nov 17, 2014 3:06 pm

if it's still asking for patch "Problem with Map You can not use this map on this navigation system: Benelux-100104" then send me private message then i give you support with teamviewer IT WIL BE ON YOUR RISK
SEND ME PRIVATE MESSAGE IF ANY MY LINK IS DEAD.
PreSS ThAnKs BuTToN iF i HelpeD YoU.
[DaY]BooM offline


Junior Member



 
Joined: Tue Nov 04, 2014 7:22 pm
Posts: 53
Has thanked: 1 time
Been thanked: 338 times

Re: One 3rd edition

Postby Gman4MF » Mon Nov 17, 2014 3:11 pm

I repeated it with your suggested Albert Easy Activator
Also updated the gps...

result:
('Benelux-100104.meta') -Not in meta.txt
'Benelux-100104.meta'- Not Generated
Requesting QuickFix download from [Please Register or Login to download file]
Download complete! QuickFix Data Applied!

I guess the activation didn't follow through because it was already completed with Fast Activator

Any idea how i can change back to the voices i already had in my previous setup ?
This navcore seems to be completely different from what i had before...
I had a selfmade startupscreen & sound, ditto for power off, doesn't seem to work...
Last edited by Gman4MF on Mon Nov 17, 2014 8:52 pm, edited 1 time in total.
Gman4MF offline


User avatar Junior Member



 
Joined: Sun Nov 16, 2014 11:52 pm
Posts: 13
Has thanked: 3 times
Been thanked: 0 time

Re: One v3

Postby [DaY]BooM » Mon Nov 17, 2014 3:21 pm

i found your problem, open block note then paste this code then save as meta.txt and copy it to navigator then try to click on "ACTIVETE ALL MAPS AND POI'S" one finish that click on "PATCH NAVCORE" post the results

 : ; Benelux v935.5753
04 37 9A 38 E1 FA 63 FA 73 86 40 21 FF 81 6A 43 Benelux-100104.meta
SEND ME PRIVATE MESSAGE IF ANY MY LINK IS DEAD.
PreSS ThAnKs BuTToN iF i HelpeD YoU.
[DaY]BooM offline


Junior Member



 
Joined: Tue Nov 04, 2014 7:22 pm
Posts: 53
Has thanked: 1 time
Been thanked: 338 times

Re: One 3rd edition

Postby Gman4MF » Mon Nov 17, 2014 3:46 pm

Like i said: it was already completed with Fast Activator

Any idea how i can change back to the voices i already had in my previous setup ?
This navcore seems to be completely different from what i had before...
I had a selfmade startupscreen & sound, ditto for power off, doesn't seem to work...
Last edited by Gman4MF on Mon Nov 17, 2014 8:53 pm, edited 1 time in total.
Gman4MF offline


User avatar Junior Member



 
Joined: Sun Nov 16, 2014 11:52 pm
Posts: 13
Has thanked: 3 times
Been thanked: 0 time

Re: One v3

Postby tendriver » Mon Nov 17, 2014 4:40 pm

[DaY]BooM wrote:i found your problem, open block note then paste this code then save as meta.txt and copy it to navigator then try to click on "ACTIVETE ALL MAPS AND POI'S" one finish that click on "PATCH NAVCORE" post the results


This is totally unnecessary. The meta code is already in the F/A Integrated Meta.txt.
; Benelux v935.5753
04 37 9A 38 E1 FA 63 FA 73 86 40 21 FF 81 6A 43 Benelux-100104.meta
I do not give help by PM. It deprives our other members of a chance to learn. Please post your issue in the appropriate forum/thread. You will get an answer.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Re: One v3

Postby tendriver » Mon Nov 17, 2014 4:58 pm

Gman4MF wrote:1. Any idea how i can change back to the voices i already had in my previous setup ?<br abp="1266">
2. This navcore seems to be completely different from what i had before...<br abp="1267">
3. I had a selfmade startupscreen & sound, ditto for power off, doesn't seem to work...

1. Confirm you have copied the Voices folder back into your unit.
2. You SHOULD have a folder titled "skins". In it SHOULD be a file titled "reskin". Open it with NotePad. You SHOULD see 1 line of numbers & letters. Copy that line & post it here.
3. Confirm you have copied all of this back into your unit.
I do not give help by PM. It deprives our other members of a chance to learn. Please post your issue in the appropriate forum/thread. You will get an answer.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Re: One 3rd edition

Postby Gman4MF » Mon Nov 17, 2014 7:56 pm

1. Confirm you have copied the Voices folder back into your unit.
2. You SHOULD have a folder titled "skins". In it SHOULD be a file titled "reskin". Open it with NotePad. You SHOULD see 1 line of numbers & letters. Copy that line & post it here.
3. Confirm you have copied all of this back into your unit.


CONFIRMING:
1. Did copy voices-folder before i installed navcore & maps (as instructed)... :024:

2. Contents of "reskin":
25;25;25-GO x30;37-GO x50;37-GO x50;18-GO x20;24-GO x40

3. antitheft.bmp, splash.bmp, suspend.ogg & splash.ogg have been copied to the root from the backup of my prior setup.
the bmp's/visual work :023: , but the ogg's/audio unfortunately remain mute :thumbdown:

additionaly:
4. my voices selection-options in menu contain only two possibilities:
Bram, Dutch (which works)
Richard, English US (stays mute, selection causes TT to remain silent until selection of Bram AND reboot. If no reboot TT will remain mute)
:017:

5. contents of my voices folder: [Please Register or Login to download file]
(Preferred voice for me would be "Mike1978" = data89.chk + data89.chk.dct (*.dct was created by fastactivate) + data89.tlv + data89.vif + data89.bmp)
Note that these voices are not shown into the TomTom One voices-menu,
nor are they selectable/audible in any way, shape or form
:helpsos:

6. if needed, contents of "my versions.txt"
ttgo.bif:
DeviceName=TomTom ONE
DeviceVersionHW=ONE (v7)
DeviceSerialNumber=Y3xxxxxxxxxx
BootLoaderVersion=55001
ApplicationVersionVersionNumber=9510
ApplicationVersion=1234792.1
CurrentMap=
CurrentMapVersion=0.0

Map(s):
F:\Benelux_935_5753\

Storage:
Size 488MB, Free 166MB

7. btw:
Car-icons/symbols works perfectly fine.
I copied the "art"-folder from my previous backup to my TomTom and could select other icons after reboot

8 selecting Card-colors does NOT work
they are visible selections but the card-colours stay kinda grey-ish, no change after selecting another ...
Gman4MF offline


User avatar Junior Member



 
Joined: Sun Nov 16, 2014 11:52 pm
Posts: 13
Has thanked: 3 times
Been thanked: 0 time

Re: One 3rd edition

Postby tendriver » Tue Nov 18, 2014 2:53 am

Gman4MF wrote:2. Contents of "reskin": 25;25;25-GO x30;37-GO x50;37-GO x50;18-GO x20;24-GO x40
3. antitheft.bmp, splash.bmp, suspend.ogg & splash.ogg have been copied to the root from the backup of my prior setup.
the bmp's/visual work :023: , but the ogg's/audio unfortunately remain mute :thumbdown:
4. my voices selection-options in menu contain only two possibilities:
Bram, Dutch (which works)
Richard, English US (stays mute, selection causes TT to remain silent until selection of Bram AND reboot. If no reboot TT will remain mute) :017:
5. contents of my voices folder: voices.zip
(Preferred voice for me would be "Mike1978" = data89.chk + data89.chk.dct (*.dct was created by fastactivate) + data89.tlv + data89.vif + data89.bmp)
Note that these voices are not shown into the TomTom One voices-menu,
nor are they selectable/audible in any way, shape or form
8. selecting Card-colors does NOT work they are visible selections but the card-colours stay kinda grey-ish, no change after selecting another ...

2. Your menu looks different because the emulation is set for a GO X30 menu.
3. Put all of these in the map folder, not in the root. The .bmp & .ogg must have the same name. example: splash.bmp & splash.ogg
4. See point 5.
5. Delete all of the chk.dct files in the voices folder, then the voices SHOULD work.
8. I gotta do a bit of research on this one.
I do not give help by PM. It deprives our other members of a chance to learn. Please post your issue in the appropriate forum/thread. You will get an answer.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 627 times

Next

Return to > Navcores 9 for TomTom Devices

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 11 guests