mimichris wrote:binbin1910 wrote:hello, when i transfer a xxxx.img and xxx.db in my (fenix 6 pro solar) and i disconnect my watch, my watch screen a error "map authentification inpossible".
have you a solution ?
thanks
If you can't patch your Garmin, try this method which works on my 66sr:
With IMGTool, open your *, img file, then go to "CodePage",
Check all the boxes and put 1252 and "apply". Close IMGTool.
Put the µSD back into the GPS then turn it on, you will see that your card opens. If it is the English language there is nothing else to do.
For the French language and to see the accented names, you must again take out the µSD from the GPS then open it with IMGTool, you open the file *, img and "CodePage", uncheck all the boxes then check the LBL box then you put 65001 then "apply". Then close IMGTool.
It is finished, put the µSD back in the GPS, turn it on and the map should be displayed with the names highlighted.
Be careful, each time the GPS and internal maps are updated, the above manipulation must be repeated otherwise, the map will not be displayed. This has happened to me at least for one map. To try after each update, if it works without doing anything so much the better.