Thread Courtesy of Downunder35m

Ever wondered how to configure the "switchfiles" and what all the setting mean?
Well ,I'll try to explain it here...

With a SE Navcore you can use the switchfiles to emulate different devices - meaning that a cheap x10 unit can get the look and feel of the biggest x40 unit.

To use the switchfiles you need a folder "config" in the root of your device.
Within this folder you can ...

Too little memory can not be solved in sys.txt.
Sorry. It can! By appointing some memory to iGO, but that is device dependable. So there is no general rule. It's a emergency solution, so to speak, and naming the wrong amount of memory can crash the device!
And in general sys.txt should be as short as possible. So that is memory saving after all.

From my experience, I know different solutions that work, however you ...

In this thread I intend to explain how to solve common errors installing iGO8.


Application database not found
The program database error message is exactly what it says. iGO8's program looks for its proprietary folder where it expects to find everything necessary to run and compile the program. But, in the case of this error doesn't.

Most likely you are trying to run iGo off an SD card. I have no information about what you ...

Only iGO8, Amigo, and Primo releases for Windows CE,

8.0 R0 => 1st generation IGO 8
8.2 => China Thailand build
8.3 R3 => 2nd generation IGO 8/Becker
8.4 => Amigo builds8.5 => Becker only builds
8.5 => iGO Primo

NOT UPDATED ANY MORE !!

Updated as a X-mas gift 2016

===> ATTENTION for build number and dates - There are fake builds around ! So far there is no malware involved - as ...

Originally posted by Chas521

I've been informed that Loquendo voices will not work with WinCE 6.

TTS_LOQ engine folder for Primo

Here's what I did and it works fine. I downloaded my modified TTS_LOQ folder and extracted it to Primo in addition to the tts folder already there. Then I put the iGO8 modified louder voices from content\voice in addition to those voices already in the Primo folder. Now I have a ...

Text To Speach (TTS)

What do I need for TTS to work ?
________________________________________

Originally Posted by kamotekaTTS has several components and these have to be all included for it to work. The first component is the TTS engine which is found in the folder TTS_LOQ. The second component is the set of dll files to support TTS. These are loqmsx.dll, LoqTTS6.dll, LoqTTS6_util.dll for the English TTS (there are different sets for different languages) ...

How to install iGO8 from scratch
This is my (modified) general manual from the old disneyworld website, written for newbies.
It is no more than a guideline. I hope it helps. That is why I wrote it.

Initial instructions


to unzip or not to unzip?
Somehow users unzip files that do not need to be unzipped with the consequence that the installation fails on start up. Read careful what to unzip! When I say ...

The iGO in this thread is very old now - released in May 2009.
The time that GPS devices were low on memory is gone too. Memory chips are cheap.

Unless your device is older, the only use of this thread is a good read. and even if you do have an older and/or a low memory device, there are more modern solutions.

Like this program : http://www.navitotal.com/showthread.php?10941-iGo-8.3.5-Minimal-for-low-power-devices-TBM

How to install ...

Current official navcores for all devices

ONE, ONE XL, XXL, Start, Ease
ONE 1st & 2nd edition : 7.903
ONE XL, ONE 3rd edition : 8.010
ONE XL-S : 8.016
ONE/XL 30 series Serial (PE-PF-RL) : 8.042
ONE/XL 30 series : 8.083
ONE IQ Routes (One2009 Plus) : 9.541.2
XL IQ Routes (XL 2009 Plus) : 9.540.2
XL IQ Routes² (XL²) : 9.541.2
XL IQ Routes Live : 9.541.2
XXL 2009-2010 : 9.541.2
XXL 550 ...

Always before patching your map update the meta.txt file using the button "downloads" and always make shure you backup your original map if you have one on your system or sd card as this keygen will overwrite your original dct.

• The program works with XP, Vista And Windows 7

• This is an all in 1 keygen and is very user friendly the buttons are self explanatory

• To patch a map use ...