News of General Discussions about iGO core - Page 15

Kind of embarrassed that as an experienced IT guy I can't seem to figure out how to update my GPS' firmware/maps. There is not much identifying info on the hardware or through the OS, so I put the SD card in my laptop and found the following info in various files:

• Delco_QX-BH751T
• iGO Primo 2.4
• Log file which seems to indicate it is using Windows CE

Google didn't give me much resources! How do I ...

Hello;

My GPS Igo Primo 2.4.9.6.13.405512 asks me to turn much too late, I would like it to give me the alarm earlier.
I think we need to change the distance from the alert.

I think it's in file you need to change the info.
D:\Program Files\Primo2\save\profiles\01\system.ini

I think the infos are these.


preshow_distance_cat0="700 "
preshow_distance_cat1="700"
preshow_distance_cat2="700"
preshow_distance_cat3="700"
show_cat0="1"
show_cat1="1"
show_cat2="0"
show_cat3="1"
show_cat4="0"
warn_cat0="0"
warn_cat1="0"
warn_cat2="0"
warn_cat3="0"
warn_cat4="0"


are you ok with me ? ...

Hi all.
I have a Uniden Igo500 that has a problem.
When turning it on an error comes up telling me that the application failed to start last time and asks if I want to reset to factory defaults.
No matter whether I select yes or no a black square appears in the middle of the screen and won't dissapear.
I have checked the crash log and it shows an out of memory error.
Its ...

Hi,
I recently purchased a used vehicle,I went to use the navigation and got directed to the calibration screen. After the step I received "error, failed to save touch" followed by "cannot find nngnavi,(or one of its components) Make sure the path and filename are correct and all the required libraries are available ". On the actual unit it has a slot for the SD card but it's missing, so I assume the previous owner ...

Hi, I have a Chinese no name double din. I run Primo 2.4. Primo runs fine and I hear the audio and TTS when the application is 'open', but even if I leave Primo running in the background on my double din, for example if I press the Home screen to listen to a CD, I no longer hear Primo.

Obviously I want to be able to hear Primo wherever I am on the double ...

Does junction view work on simulation? I was sure it did. Anyway i am pulling my hair out trying to get it to work. This is my android sys,txt for primo 9.6.29..636270

Quick edit: I do have FJW maps 2015 Q3

[device]
type="android"

[2d]
traffic_lights=1

[3d]
use_all_building_textures=1
render_buildings_as_shapes=0

[3d_config]
navi_mode_roadsign_dist_limit=800
rotated_roadsigns=1

[android]
fullscreen=0
tablet=0
has_physical_home_button=0
show_status_bar=0

[folders]
has_secondary_root=1
addons="/storage/extSdCard/addons"
android_secondary_root_path="/storage/extSdCard/addons"

[navigation]
sim_speed_factor=1.5
;junction_view_type=mixed
junction_view_blink_time=500 ;(0)
show_current_city=0
show_city_in_next_street=0


[camera.intersection_zoom]
enabled=0

[kml]
default_icon=1

[camera.roundabout]
enabled=0

[contacts]
really_read_android_contacts=1 ...

G'day all. I have a problem and I can't figure it out. I have Igo 9 CE running on a Clarion VX506AU head unit. The program loads ok and starts tracking in map mode. A few mins later the tracking on the map stops. When i press on the screen it updates to the current position and then will keep going a few more mins and then stops again. It's like the auto-tracking is stopping ...

My device has the odd habit to reset the navigation to an old setting:
autoreplan_action=”AUTO” is what I want
but the device changes this random or after a cold start to
autoreplan_action=”ON” or "OFF".
I have been playing with options to prevent turning off autoreplan.

So I have to check and select that option every time I start.
I've looked up "Save" where the old SYS.INI is stored and that will also change.
So probably ...

Something isnt right cos BOTH IGO8 and Primo arent sounding out TTS on my chinese double din. IGO8 is not even sounding out the preview sample TTS anymore.

What do you experienced guys think this is pointing to when this is happening on BOTH applications? Thanks in advance.

I mean, before I update the maps came out areas and on highways since parquin update the maps q2 2016 no longer appear here if anyone knew why this happens and I can explain it be obliged