How To Unlock Cs9100?

please help me to unlock the cs9100 WinCE 5.
i bought new and i cant instal navigation softwares because its locked.
or help me to instal the navigation softwares.
the only thing they telling just but the exe into sd/nav/nav.exe

We need the entire specifications of the device or the complete name of the device not just the model number.

EDIT: Is this it? [Please Register or Login to download file]

When so, please confirm, it's easiest to install iGO8.3 like this.

• to install the software use a sd card, install in a folder called "Navi" and rename the executable file Navi.exe.
• Navigation software settings:
  
  • GPS receiver COM port: COM1
  • GPS receiver rate: 9600
  • Video output resolution: 480×234

When you instal iGO8 ( I suppose your device has only 64MB RAM, so iGO is the best choice), "install" is no more than "copy the files" and possibly/probably make some changes to sys.txt.

Thanks chas and nabi
Spec:

CPU: Samsung 2440 ARM9 400 MHz
OS\Language\Localization: WIN CE 5.0\Eng.\Rus.(Eng.)
Memory: Nand 64 MB, SDRAM 64 MB
Memory card: MMC, miniSD, SD, SDHD up to 16 GB (SDHC depends on the manufacturer)
Video Out:
RGB 480 × 234
1 x RCA NTSC 3.58 MHz
Audio Out:
1 x RCA stereo 0,25 W
1 x mono jack 3.5 mm (for speaker)
USB Host: 1 x Type A (for external devices)
USB Device: 1 x Mini USB (deactivated)
Control:
1 x Remote control with a touch pad
Touch screen (via USB controller or cable for multimedia receiver) *1
Onboard control devices (adapters for Toyota, Lexus, Mazda, Subaru) *2
GPS:
MTK MT3329T
Channels: 66
Frequency: L1 1575.42 MHz
Sensitivity -165 dB
Reacquisition: 1 s
Protocol: NMEA0183 V3.01: GPGGA (1 time/1 s), GPGSA (1 time/5 s), GPGSV (1 time /5 s), GPRMC (1 time /1 s), GPVTG (1 time/1s), (additionally GLL or MTK NMEA Command)
Hot\Warm\Cold start: < 1\28\30 s
Antenna: SMA active (cable length 5m)


I am new to these devicse if you just try to make it easy how to instal them or how to change the sys.

First go H E R E and read all, I suggest you do it slowly and twice so you understand. Download the program.


Unrar the downloaded file on PC, then you wil get a folder called igo. Open it and rename the file igo8.exe to Navi.exe.
Open the file called sys.txt in notepad. Search for ;resolution_dir="320_240" delete the ; then edit "320_240" to "480_234".
The sentence must now be : resolution_dir="480_234"
Close and save.
Rename the iGO folder to Navi.

Copy the folder to an sd card, put it in the device and start it. There should be a start navigation button somewhere, a hardware button or screen button, I don't know. Start the navigation program and do the initial settings. (language and voice). See that you have a clear view to the sky and wait for a gps fix.
Report back.

Remark : There are no maps and other content yet. We will see to that later. First get iGO up and running

thanks its working now.

what about tomtom or garmin can you help me with these too ?

Forget about TT for WinCE. Garmin XT here http://www.navitotal.com/showthread.php?9284-How-to-create-a-SW.UNL-for-WinCE5-XT