No Sound (at all) on iGo Primo 1.2

DigitalMedia here is the link
Primo1.1:
[Please Register or Login to download file]
and this is for Igo8.3 :
[Please Register or Login to download file]

will try out primo 1.1 now.

i have given up on 8.3 as i have tried about 5 version that will not work on my unit. I have ver8 working but NO AUDIO at all.

just can' take a trick.

thanks for the share.

thanks again holyland for primo 1.1

how do i go about reverting it back to factory skin and look?

Have you tried all my different versions from here in the iGO program sub-section? They are designed to work "out of the box" with TTS.

DigitalMedia wrote:how do i go about reverting it back to factory skin and look?

this is my another issue this version is works good with me but i didnt like the skin

what about Primo1.2 can anyone help us to solve rhe problem?

holyland wrote:this is my another issue this version is works good with me but i didnt like the skin

what about Primo1.2 can anyone help us to solve rhe problem?

There seems to be a difference of opinion among some people. A lot of members like Primo 1.1 better than 1.2. Seems that some members have found bugs in 1.2. As for the skins for 1.1, look in the iGO skins sub-forum.

EDIT: If you're interested, I installed this first http://www.navitotal.com/forums/showthread.php?1728-Working-Primo-from-my-device
Then did this http://www.navitotal.com/forums/showthread.php?3990-Primo-1.1-basic-updated-pack-8.5.11.168090-Nov-17-2010 I find this the best of all!

chas521 wrote:EDIT: If you're interested, I installed this first http://www.navitotal.com/forums/show...from-my-device
Then did this http://www.navitotal.com/forums/show...90-Nov-17-2010 I find this the best of all!

i downloaded them but they are for the resilution 480_272
but my device is 800_480
how can i modefy them?

You need an other data.zip that supports 800*480, I give 2 links hereafter (for v1.2 and v1.1)
Choose one from the next 2 lines (visible after selecting the lines)
http://www.filefactory.com/file/ca90e8e/n/Blueprint_v1.1_multidata.rar
[Please Register or Login to download file] ... tidata.zip

Or you can go here http://www.navitotal.com/forums/showthread.php?4789-official-Primo-1.1-multires-data.zip-!!

@chas521
i downloaded the version you uploaded (primi1.1) and tried it, the problem is the same issue with primo1.2 happened with me (radio voice muted when pres any key) !!!
it will made me mad :(, just this version ( [Please Register or Login to download file] ) is worked good with me!!
where is the problem i dont know!

holyland wrote:@chas521
i downloaded the version you uploaded (primi1.1) and tried it, the problem is the same issue with primo1.2 happened with me (radio voice muted when pres any key) !!!
it will made me mad :(, just this version ( [Please Register or Login to download file] ) is worked good with me!!
where is the problem i dont know!

Then it's obviously some entry thing that has been added to the 1.1 sys.txt to make it work for you. Compare the two sys.txt[s] and copy the entry if you see it. 1.2 is based upon 1.1 and the kernel is pretty much the same so it might be just a sys.txt entry thing.

this is the sys.txt of the primo1.1 warked on my device

Code:

[device]
type="navon_N480"


[rawdisplay]
highres=0
screen_x=800
screen_y=480
stretch=1


[interface]
show_exit=1
resolution_dir="800_480"
[rawdisplay]
highres=0
screen_x=800
screen_y=480
stretch=1




"primo/ui_igo9"



[sound]
use_method=0
mute_os_key=0
sound_volume=255
voice_volume=255



[Switchmap]
1 = "map_ta, \ SDMMC \ primo,"
2 = "map_nt, \ SDMMC \ primo,"
3 = "map_ot, \ SDMMC \ primo,"


[feature]
tunnel_guidance=0

[warning]
speedcam_warning=1
speedlimit_warning_visual=1
speedlimit_warning_voice=1
speedlimit_warning=1
speedwarn_alt_tolerance=110
speedcam_maxdistance_from_road=10
warn_distances=150:2000,130:1500,110:1000,90:750,6 0:400,40:150
speedcam_max_lookahead=3000
overspeed_sound=0
is_spoken=1

[camera.roundabout]
enabled=0

[sound]
ding=0


[debug]
hnr=1
show_hnr=1


[3d_config]
disable_roadsign_navigation_mode=1
rotated_roadsigns=1

[3d]
use_all_building_textures=1
fade_distance_for_car=0
fade_distance_for_guidance_arrow=0
fade_overlap_tolerance=0


[warning]
speedcam_warning=1
is_spoken=1

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Achtung Blitzer."
overspeed_spoken_type=1

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Achtung Mobilblitzer."
overspeed_spoken_type=1

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Achtung Blitzer."
overspeed_spoken_type=1

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Achtung Durchschnittsgeschwindigkeitskontrolle."
overspeed_spoken_type=1

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Achtung Ampelblitzer."
overspeed_spoken_type=1

[speedcam_category:6]
activated_spoken_type=speech
activated_speech="Achtung Bahnübergang."
overspeed_spoken_type=1

[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Achtung Bus-Spur-überwachung."
overspeed_spoken_type=1

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Achtung Unfallschwerpunkt."
overspeed_spoken_type=1

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Achtung Schule."
overspeed_spoken_type=1

[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Achtung Orts-eingang."
overspeed_spoken_type=1

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Achtung Ampelüberwachungs-kamera und Geschwindigkeitskontrolle."
overspeed_spoken_type=1

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Achtung Mautstelle."
overspeed_spoken_type=1

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Achtung Krankenhaus."
overspeed_spoken_type=1

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Achtung Feuerwache."
overspeed_spoken_type=1

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Achtung Staugebührzone."
overspeed_spoken_type=1

[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Achtung Gefährliches Gebiet."
overspeed_spoken_type=1


[oasis]
exclude_directories="%myflashdisk%\,%root%\windows ,%sdcard%,%My Flash Disk%\,%Storage Card%"
include_directories="%Storage Card%\mp3,%sdcard%\mp3,%Storage Card%\primo\,%sdcard%\primo\captures\"


[switchmap]
changer="\Storage card\primo\utility\MapChanger.exe"
1=",map_ta,\Storage Card\primo,,"
2=",map_nt,\Storage Card\primo,,"
3=",map_ot,\Storage Card\primo,,"




[interface]
laneinfo_signpost_enabled=1


[interface]
mapfontscale=90

[3d_config]
disable_roadsign_navigation_mode=0

[modules]
;IFM_TRANSMITTER="NNGHAL_FM_TRANSMITTER"
;IFM_TRANSMITTER_MANAGER="FM_TRANSMITTER_MANAGER_I MP"


;[tmc]
;saved_config_available="1"
;saved_config_classname="NMEA_GPSTMC_AMARYLLO"
;saved_config_portname="COM"
;saved_config_port="1"
;auto_tuning="1"
;saved_last_tuning_mode="1"
;saved_last_frequency="960"



[tmc]
port="COM,1"
baud=38400
source="gnsport"


[tts]
tts_buffer=131072
priority="HIGH"
announce_exit_directions=1
always_say_road_names=1
announce_street_name=1
tts_gc_size=524288
skip_exit_numbers=0

[gps]
port=2
baud=4800


[folders]
has_secondary_root=0




[Homework]
home="HOME"
work="WORK"

[bluetooth]
btappl="/StorageCard/Primo/BTOnOff.exe"
;btappl="/ResidentFlash/iPAQ/Bluetooth/BlueSoleil.exe"




[modules]
;IFM_TRANSMITTER="NNGHAL_FM_TRANSMITTER"
;IFM_TRANSMITTER_MANAGER="FM_TRANSMITTER_MANAGER_I MP"



[Interface]
shutdown_time = 0


[warning]
speedcam_warning=1  <----
warn_distances=130:500,110:450,90:300,60:230,40:12 0
overspeed_sound=”!camera”
speedwarn_alt_builtup_based=1
pedestrian_warning=0
speedcam_visualtype=1
speedcam_soundtype=1
speedlimit_warning_voice=0   <----
speedlimit_warning_visual=1
speedwarn_tolerance=110  <----
speedlimit_warning=1  <----
speedcam_snap_distance=200




[sound]
ding=0

[shutdown_time]
interface=0






;3d_building_color = 0,210,210,190
3d_building_roof = 0,210,210,190
3d_faded_building_body=0, 210,210,190
3d_tunnel_master_color=0, 100,100,100
3d_building_outline_color=0, 100,100,100
3d_faded_building_wireframe=0, 0,0,0

;3d_building_color = 0,210,210,190


[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_min = 1
backlight_max = 5
backlight_methods = 14
backlight_events= 1,2



[device]
sdcard_dsk_num = 2

[feature]
signpost_coloring=1

;[local]
;language_lcid="3081"


[route]
has_carpool=0

[warning]
send_warn_event=1
speedcam_soundtype=2
speedcam_need_approach_beep_on_section_cameras=1

[interface]
drive_carefully=1
clearcity=1



[map]
3d_min_zoomlevel=10
minimum_zoom_amount=5
minimum_tilt_amount=90

[camera]
minzoom=30
maxzoom=40

[camera1]
minzoom=30
maxzoom=40

[camera11]
minzoom=30
maxzoom=40

[camera2]
minzoom=30
maxzoom=40

[camera21]
minzoom=30
maxzoom=40

[camera3]
minzoom=30
maxzoom=40

[camera31]
minzoom=30
maxzoom=40

[camera.intersection_zoom]
enabled=0

[camera.roundabout]
enabled=0

when copy this code and paste in the sys.txt of the primo1.2, while the primo in the wellcome screen i receive an error tells me that the voice is not avilable!!

im a begginer in this field so can you help me?!
her also the sys.txt of the igo8.3 works good on my device:

Code:

[interface]
maxzoom2d=6000000
show_exit=1
show_minimize=0
skin="ui_igo8"
;resolution_dir="800_480"
;screen_x=800
;screen_y=480
vga=1
wide=1
recalc_voice=0
mapfontscale=200
drive_carefully=0
popup_info=1
laneinfo_signpost_enabled=1
shutdown_time=0
show_orientation=1
defaultzoom3d=40

[rawdisplay]
highres=0
autoconfig=1
;screen_x=800
;screen_y=480
;class="auto"
driver=gdi


OK, now I'm confused. You show me two sys.txts from two different programs and then you say they both worked fine. So, what exactly is the problem? Obviously, I'm missing something somewhere. Please tell me what is wrong even though you say both are working fine.

EDIT: Let me add [color="red"]my[/color] opinion. I use Primo 1.1 instead of 1.2 because I like its navigation ability better. However, I use iGO 8.3 almost exclusively because I like it better than 1.1 because of all the options I can control.

Don't know if anybody is still reading this thread, but well, I use iGo8 on my Pioneer AVIC X710BT fine with all sound, but can't get any from Primo 1.x since a while ... because I was since a while always listening to the radio ...

So I finally found the gimmick for the sound to work again in Primo 1.x.

Very simple and I found that out purely at random, after inserting an USB key with music in that and the A/V was automatically looking to play those songs, and the Primo sound went back to life instantly, both voice and key sound.

So USB, SD (or maybe iPod) music has to be played when running Primo to have sound, but the radio alone is not enough.

Weired behavior but that is it! Hope that this fixes your guys' problems.

Enjoy!

Did you try this with silent mp3's?

That tip could come in useful for someone...