Tue Oct 09, 2012 3:30 pm
As above mentioned.
Its originally running speednavi, too bad i have lost the original SD card.
suspect the shell is lock in the unit & there is no usb connection to PC to explore it more.
any1 please help, thanks in advance.
Tue Oct 09, 2012 4:30 pm
I know nothing about this device or software, but from a quick search the speednavi software seems to run on WinCE 5 hardware.
I suspect at least iGO8 will run.
Does anything happen when the 'navigate' button is tapped?
Wed Oct 10, 2012 2:56 am
thanks for fast reply.
when no SD card insert, press at GPS button it will prompt for speednavi is missing, check SD card.
Thu Oct 11, 2012 10:53 am
It's easy enough to build a SD card with new software, but as the device looks for a specific filename, getting the new software to start is the problem.
In the device settings is there an option to change or setup the nav programme?
Sun Oct 14, 2012 9:36 am
there is no path to set the nav programme.
been dismantle the unit & look at the unit mainboard, there is an empty space for USB port, but due to can;t find any information of the board diagram, giving up.
Tue Nov 13, 2012 2:24 pm
finally i have obtain the RAW image of the SD card, should i upload it to let every1 look at it?
Tue Nov 13, 2012 2:37 pm
nsxt99 wrote:finally i have obtain the RAW image of the SD card, should i upload it to let every1 look at it?
Yes, if you can. Forums like this only exist because of the excellent contributions of its members.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.