Becker Traffic Assist Highspe 7934 - want the newest upto ma   

Becker Traffic Assist Highspe 7934 - want the newest upto ma

Postby StixUK » Tue May 10, 2011 11:18 am

Hello all,

I am wondering if someone can help me with my sat nav system and installing some new maps onto the device.

I have unlocked the Sat Nav already and have a handy interface on my 2GB SD card that allows a good looking GUI to select many different map systems.

The unit is running Windows 4.2CE with 64MB RAM.

I would like a different map interface that allows me to get the most up-to-date maps and that are likely to be updatable as well for the forseeable future.

If I could have that and some detailed instructions on how to do it then I would be a very happy camper.

Regards

Michael
StixUK offline


Junior Member



 
Joined: Sun May 08, 2011 11:01 pm
Posts: 7
Has thanked: 0 time
Been thanked: 0 time

Postby nabi » Tue May 10, 2011 11:43 am

Much useful info here and here and here
________________________________________________________________________
When I do good, no one remembers, when I do wrong, no one forgets
.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
nabi offline


Ex Super Mod



 
Joined: Mon Dec 28, 2009 5:22 pm
Posts: 2429
Location: somewhere unknown
Has thanked: 39 times
Been thanked: 233 times

Postby Fatboyfun » Tue May 10, 2011 11:46 am

This version of iGO Primo is from my WinCE 4.2 64MB device, It's built for a screen resolution of 320x240 though, but can be easily converted, I don't know what your device's resolution is.

:link:
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby StixUK » Tue May 10, 2011 12:50 pm

Is this the latest version and what date is it from? Regards
StixUK offline


Junior Member



 
Joined: Sun May 08, 2011 11:01 pm
Posts: 7
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Tue May 10, 2011 1:01 pm

Not quite the latest version but it's stable and works very well, plus it already has the WinCE 4.2 TTS Dll's installed.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby StixUK » Tue May 10, 2011 1:10 pm

and how do I get it onto my Sat Nav once it has downloaded, is it just a cut and paste job onto the SD card or is there other stages involved (((this is the bit that confuses me particularly)))
StixUK offline


Junior Member



 
Joined: Sun May 08, 2011 11:01 pm
Posts: 7
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Tue May 10, 2011 1:47 pm

Download, extract and place Primo folder onto your storage card, download ONE map to start with and copy to map folder (\{card}\Primo\Content\Map\*.fbl)

Configure your unlock shell to run iGO.exe

You will need to make some edits to sys.txt to match your device, we'll go through those later.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby StixUK » Tue May 10, 2011 10:10 pm

I downloads one Igo8.3 Map for the UK as don't need any others.

I have set shell to run the IGO application and now I just need to edit the sys.txt. From what I understand you have to alter the baud rate and port but is there anything else at all?

Regards
StixUK offline


Junior Member



 
Joined: Sun May 08, 2011 11:01 pm
Posts: 7
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Tue May 10, 2011 10:21 pm

Depending on your device resolution, You may need to edit the resolution entries in sys.txt and replace the data.zip. My device was 320x240.
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby StixUK » Wed May 11, 2011 6:24 pm

The resolution is fine. I have the screen up with the map visible but I keep getting the "Autodetecting GPS receiver" message continually and nothing else
StixUK offline


Junior Member



 
Joined: Sun May 08, 2011 11:01 pm
Posts: 7
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Wed May 11, 2011 6:58 pm

Edit the port and baud settings to match your device in sys.txt
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times

Postby StixUK » Wed May 11, 2011 7:21 pm

I have already done that so did a quick search on the forum to help with locating satellites for Becker and came up with this one http://www.navitotal.com/forums/showthread.php?5375-Autodetecting-GPS-receiver../page4&highlight=Autodetecting

It helped immesnely except I jusst cut the whole Becker program off the Windows memory and pasted it to my desktop and then turned the Sat Nav back on, reset it and then I had the GPS working. Seems like the Becker program was getting to the Satellites first and then creating somekind of conflict.

So now I have the IGO8.3 Q4 2010 maps on my Windows CE 4.2 device...muchly happy!!!

And thank you very much for all your help!!!

THREAD CLOSED!
StixUK offline


Junior Member



 
Joined: Sun May 08, 2011 11:01 pm
Posts: 7
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Wed May 11, 2011 8:09 pm

Thank you for the feedback.

Enjoy your device :)

THREAD_CLOSED
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times


Return to Other Systems

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 25 guests