DUH!:7:
5197
If it airn't broken...

any ideas what is it?

Was looking and adding, clearly mixed up and added something from a different iGO folder...:smilie_a_003:

I added speedcams, cars, skins, languages and hell knows what...

OBVIOUSLY this time didn't back up!

[interface]
shutdown_time=0

0 means disabled, 1++ is the number of seconds for the countdown timer, you will get a temporary dialogue box stating "external power disconnected" when disabled.

The error you get about the missing log collection or eula can be dismissed, you won't see it again unless you delete the save directory, I don't tend to worry about it, which version of primo are you using, some of the early data.zips had missing files within the 320x240 folder.

Its yours Primo 1.1 from couple of years ago now
the actual error is in reports? where?
I mean it shuts down iGo...

uh yah, I added

[interface]
shutdown_time=0

now it's like:

Code: Select all

[debug]
skip_eula=1
cache=2048
reserve_memory=2000000
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400

[gps]
 Port=7
 Baud=57600

[interface]
resolution_dir="320_240"
extra_settings=1
vga=0
shutdown_time=0
[navigation]
sim_speed_factor=3.0

[power]
backlight_sync_with_OS=1
powermgm_state=0
backlight_day=100
backlight_night=54
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1

[rawdisplay]
screen_x=320
screen_y=240
stretch=1

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[speedcam]
enable_at_startup=1

[tts]
automatic_direction_conversion=1
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="CRITICAL"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[warning]
speedcam_enabled=1
speedcam_visualtype=1
speedcam_soundtype=2
speedcam_soundtype_4=2
speedcam_warning=1
speak_tts_only=1
speedwarn_alt_builtup_based=1
speedwarn_alt_limit=1
speedwarn_alt_tolerance=100
speedwarn_alt_toltype=1
speedwarn_tolerance=100
speedwarn_toltype=1


Atasas wrote:Primo 2.0 version on a torrent comes up as [color="#FF0000"]1623MB[/color]

[color="#FF0000"]Not true.[/color] You are looking at an entire torrent which likely contains far more than you actually need on your device/SD Card. The base Primo files are around 90 MB-100MB. Only if you add EVERY POSSIBLE TTS voice would it go much above 200MB total (without maps). ONE English TTS voice would add about 90MB or so.

Yurbuh Tuggly wrote:[color="#FF0000"]Not true.[/color] You are looking at an entire torrent which likely contains far more than you actually need on your device/SD Card. The base Primo files are around 90 MB-100MB. Only if you add EVERY POSSIBLE TTS voice would it go much above 200MB total (without maps). ONE English TTS voice would add about 90MB or so.

Thanks for that!
will have look for more sensible Primo 2.0 then....

Atasas wrote:DUH!:7:
5197

deleted all the extras I added (I think) she isn't starting....
Either complete re'do with Primo 1.1
or you guys would know as how to get rid of process or notice that causes it?

meanwhile dl'ing

iGO PRIMO V.2.0 WinCE 5.0 + maps europe

[Please Register or Login to download file]

Code: Select all

/igo-primo-v-2-0-wince-5-0-maps-europe-t6968380.html

One a fatal error had occurred you will probably need to delete the save directory to clear it.

If you note the file that's missing (in the failed to open ... box) you can usually copy it from the 480x272 folder to the 320x240 folder in data.zip, also note it may be in the skin_night folder as well, copy that one to the corresponding folder as well.

Atasas wrote:meanwhile dl'ing
iGO PRIMO V.2.0 WinCE 5.0 + maps europe
[Please Register or Login to download file]

And you download some unknown version from some unknown source and then expect to get appropriate answers here?
I suggest you take Fatboyfun's advice from many posts ago:

use the one from my guide

Guide-to-Binatone-devices

Fatboyfun wrote:One a fatal error had occurred you will probably need to delete the save directory to clear it.

done- she started with
5198

Fatboyfun wrote:If you note the file that's missing (in the failed to open ... box) you can usually copy it from the 480x272 folder to the 320x240 folder in data.zip, also note it may be in the skin_night folder as well, copy that one to the corresponding folder as well.

well, clearly as for me noting- nana! last couple of years I've gone downhill... re'learning as you taught/shown.
So once I had this error, deleted all the extra bits put on (most likely mixed up and place from some incmpatable version of iGo(instead of Primo 1.1)) it created something in save folder, that is deleted now and is looking for GPS signal.. probably same as last time round for about half an hour...
Meaning, that in case I will run Primo 1.1 I'll be more careful as what I'll put in it next time.


Edit- she's running(found signal already)

Thanks guys!................................................................
Next step... once I'll have Primo 2.0 downloaded.(in 5 min)
.. I do promise to back up this version (1.1 as is) and keep backing up before adding each extra, in case I'll want to get back to this one

Yurbuh Tuggly wrote:And you download some unknown version from some unknown source and then expect to get appropriate answers here?
I suggest you take Fatboyfun's advice from many posts ago:

Guide-to-Binatone-devices

Search returned only one 2.oPrimo version of 1623MB, but particular thread and tutorial or more specifically as dl link got missed by me

Getting

[Please Register or Login to download file]

Code: Select all

/en/index.html

192MB:thumbup:

Atasas wrote:Search returned only one 2.oPrimo version of 1623MB

iGo-Primo-2.0-Build-9.6.5.211211 Torrent

Depending what is chosen to download in the full Torrent, the size will vary. EVERYTHING downloaded will equal about 1.38 GB.
ONLY the Primo 2 Program will equal about 240 MB.
If you want to pick and choose what you want to download (for example; to exclude TTS Voices that you don't want or need), when your client opens the downloaded *.torrent file, go to FILES (how you do this varies with the Torrent Client you have installed on your PC), and UNCHECK what you don't want to download. For example, in the folder TTS Voices, uncheck any language Voice Files that you don't want.

But you will probably be better off with FBF's version...since it should already be optimized for your device.

Surprise surprise!
Kat.ph file loaded up (78 mb)- copied SYS.txt and SHELL.ini from working Primo 1.1 version; Cppied maps; Speed Camera Database; renamed (i3-Primo in to MobileNavigator) and she works!- in appearance it is almost like Primo 1.1, has Bluetooth support (actual Binatone don't have one)- Loving it!
(downside set up language is American English and it didn't like English set up language)
Despite it not being from navitotal:crazy:
(if one wants I will upload working contents of whole such SD card)
.....................................................................................
Off to Primo 2.0 by FatBoyFun!
Works just fine so far!
got to load the maps

edit:- i3 is 90% as Primo 2.0 (I know now)

FatBoyFun's Primo 2.0= dog's bollok$!:thumbup:

Thanks guys!
:D
I'll have a look a bit later regarding annoying (the same) pop up or even shutting down by itself command, when charge goes, but so far it seems the best!
current sys.txt

Code: Select all

[debug]
skip_eula=1
experimental_features=1

[gps]
Port=7
Baud=57600

[interface]
show_exit=1
extra_settings=1
show_programs=1
shutdown_time=5

[other]
demo_enabled=0

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1
csv_voice_enabled=1

[speedcam]
enable_at_startup=1

[vr]
disabled=1

[warning]
warn_distances=130:800,110:600,90:400,60:200,40:150
speedcam_max_lookahead=1000
:dance:

Could I offer an upload of SD card contents for future readers?

Change shutdown_time=5 to shutdown_time=0

I left it in because most users like the auto power on/off with the ignition.

You are more than welcome to upload a working installation!