Binatone B350 (CE6.0) (trying) Amigo or iGO variant   

Post a reply

Binatone B350 (CE6.0) (trying) Amigo or iGO variant

Postby Atasas » Mon Feb 04, 2013 8:44 am

Hi guys!
(the usual suspects- FatBoyFun and chas521):dance:
What an pleasure to have me here!:crazy:

Today I'm trying to get OLD Binatone B350 to be dancing:7:... why not?:mil:
dah specs:
5193
Display (Touch Screen): 3.5” TFT LCD
Resolution: 320 x 240 pixels
SD-Card Memory: 256MB - GB SD up to 2GB
GPS chipset: Sirf Atlas III or IV
Speaker: Yes
USB: USB 1.1
Standby Time on Battery: Up to 5 hours
Operating Time on Battery: Up to 3 hours
Memory on Board ROM/RAM: up to 2GB / 64MB
Battery/Type: Built-in 1000 mAH li-polymer


Trying chas521'es Amigo (as could be found)
[Please Register or Login to download file]
Code: Select all
/files/ncpbf7mo2

(62.58 MB)

So... loaded extra Navteq 2012 Q2 few areas .flb maps in to :\content\map

and had
5194
content of SD card
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Share On:

Share on Facebook Facebook Share on Twitter Twitter Share on Digg Digg Share on Reddit Reddit Share on Delicious Delicious Share on Tumblr TumblrShare on Google+ Google+Share on MySpace MySpace

Postby Atasas » Mon Feb 04, 2013 8:53 am

however it failed to load
[Please Register or Login to download file]
downloaded
Amigo Resolutions
(as could be found)
[Please Register or Login to download file]
Code: Select all
/v/42182131/file.html
by chas521 23.58 MB
Placed the 320x240 file in SD card
5195

Still- ERROR!:chok_mini:

I meant to play a bit with a sys.txt, do have now
[sound]
ding=1

[gps]
Port=COM:7
Baud=57600

[interface]
resolution_dir="320_240"
extra_settings=1
vga=0

[folders]
;content="Storage Card\Igo8\content"

[warning]
speedcam_max_lookahead=200

[rawdisplay]
screen_x=320
screen_y=240
stretch=1


whilst I started with
[sound]
ding=1

[interface]
shutdown_time=0

[folders]
;content="Storage Card\Igo8\content"

[warning]
speedcam_max_lookahead=200


The SHELL.ini
\SDMMC\MobileNavigator.exe


still the same thingy about it failing to load interface
[Please Register or Login to download file]

Where am I going wrong?
Many thanks!:thumbup:
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Atasas » Mon Feb 04, 2013 9:09 am

DUH!:7:
I should have replaced data.gro- now works! iGO AMIGO!:dance:
been few minutes, still looking for signal.
'll post back soon!:tease:
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Atasas » Mon Feb 04, 2013 10:08 am

Problemo remains that It just refuses to find satellites with either one or other sys.txt,
what would the fix for that?
(as it's not 100% working yet)- do like it for simplicity, unsure if post code search is as good as on Primo, but definitely don't like limited way as how settlement search works...


Meanwhile going to have go at iGO 8 (8.3) and if still not (managing) or too happy back to iGO Primo 1.1:thumbup:
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Fatboyfun » Mon Feb 04, 2013 10:19 am

Primo 2 with TTS pro works ok, just leave out the dem and 3D building files for speed reasons, use the one from my guide which is already configured for your device...
Fatboyfun offline

User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times
Top

Postby Atasas » Mon Feb 04, 2013 10:46 am

I'm on a Primo 1.1 at the mo- same old (bad)- looking for GPS signal..
Fatboyfun wrote:Primo 2 with TTS pro works ok,

I think, I fear, you've lost me "with TTS pro" part...?

Fatboyfun wrote:use the one from my guide which is already configured for your device...

I'll have to get back- once read your tut!
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Atasas » Mon Feb 04, 2013 10:59 am

OK iGO Primo 2.0 version on a torrent comes up as 1623MB... leaving way too little space for maps... 2GB card handling size limit
I will be glad to get back good old Primo 1.1 to work!:chok_mini:

@ FatBoyFun- once again- (sorry to be so dumb!), just can not remember as weather I should use port splitter or else way as how to alter the way boud or else is wrong at the mo?
Thanks!
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Fatboyfun » Mon Feb 04, 2013 11:12 am

Within the default shell is a GPS test programme, does this pick up satellites?

By the sys.txt should be...

[gps]
Port=7
Baud=57600
Fatboyfun offline

User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times
Top

Postby Atasas » Mon Feb 04, 2013 11:28 am

Original- that runs without a card- finds GPS!
all of the playing now and none shell.ini or other text file makes it find it now...
that's the SYS.txt
debug]
skip_eula=1
cache=2048
reserve_memory=2000000
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400
///////////////////////////////////////////////////////////////////////
[color="#B22222"][gps]
Port=COM:7
Baud=57600[/color]
///////////////////////////////////////////////////////////////////////
(Now changed to)
[gps]
Port=7
Baud=57600

[interface]
resolution_dir="320_240"
extra_settings=1
vga=0

[navigation]
sim_speed_factor=3.0

[power]
backlight_sync_with_OS=1
powermgm_state=0
backlight_day=100
backlight_night=54
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1

[rawdisplay]
screen_x=320
screen_y=240
stretch=1

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[speedcam]
enable_at_startup=1

[tts]
automatic_direction_conversion=1
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="CRITICAL"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[warning]
speedcam_enabled=1
speedcam_visualtype=1
speedcam_soundtype=2
speedcam_soundtype_4=2
speedcam_warning=1
speak_tts_only=1
speedwarn_alt_builtup_based=1
speedwarn_alt_limit=1
speedwarn_alt_tolerance=100
speedwarn_alt_toltype=1
speedwarn_tolerance=100
speedwarn_toltype=1

and so far- nono! still looking for GPS signal...

Also what command I should enter/change for the disconnected charger not to have "turn off"" annoying pop up?
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Atasas » Mon Feb 04, 2013 11:51 am

am I wrong in believing, that this device understands this sort of configuration:
shell.ini:
\SDMMC\MobileNavigator.exe


SYS.txt as above

iGO Primo is renamed as MobileNavigator

GPS port bout is configured as:
[gps]
Port=7
Baud=57600

(on SYS.txt)

what have I uninvented here?:smilie_a_003:

Edit:
last "idea"- could it be because I am using NavTeq maps? (though on good old Looket- works) as I noticed map indicating unit being in France and looking for GPS signal...?
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Fatboyfun » Mon Feb 04, 2013 12:38 pm

If it's looking for satellites rather than autodetecting GPS receiver then it's found the GPS, it can take up to, 30 minutes to find the satellites, take it outside and give it some time.
Fatboyfun offline

User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times
Top

Postby Atasas » Mon Feb 04, 2013 12:47 pm

Fatboyfun wrote: take it outside and give it some time.

:mamba_mini:
Don't you get any ideas! (I know you figured where my gaff is!)
I left it oustide, but left also big- scary dog to guard it!:crazy:
:dance:
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Atasas » Mon Feb 04, 2013 2:34 pm

Fatboyfun wrote:If it's looking for satellites rather than autodetecting GPS receiver then it's found the GPS, it can take up to, 30 minutes to find the satellites, take it outside and give it some time.

Man you was right!:thumbup:
she works!:dance:
Dunno how to thank you!:D

Any chance of reminding one, as how to get rid of a nagging pop up for switch off when charge stops?
and... how to set up, that upon startup straight in to navigation (map) page?
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top

Postby Fatboyfun » Mon Feb 04, 2013 2:58 pm

In the interface section of the sys.txt look for shutdown time, change it to 0, don't remember the exact wording, you will get a dialogue box saying "External power disconnected" though.

To go to the map on startup go into the extra settings/ui labs and "skip preview map"
Fatboyfun offline

User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 408 times
Top

Postby Atasas » Mon Feb 04, 2013 3:14 pm

Fatboyfun wrote:In the interface section of the sys.txt look for shutdown time, change it to 0, don't remember the exact wording, you will get a dialogue box saying "External power disconnected" though.

To go to the map on startup go into the extra settings/ui labs and "skip preview map"

1- ehrm- not there...

[debug]
skip_eula=1
cache=2048
reserve_memory=2000000
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400

[gps]
Port=7
Baud=57600

[interface]
resolution_dir="320_240"
extra_settings=1
vga=0

[navigation]
sim_speed_factor=3.0

[power]
backlight_sync_with_OS=1
powermgm_state=0
backlight_day=100
backlight_night=54
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1

[rawdisplay]
screen_x=320
screen_y=240
stretch=1

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[speedcam]
enable_at_startup=1

[tts]
automatic_direction_conversion=1
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="CRITICAL"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[warning]
speedcam_enabled=1
speedcam_visualtype=1
speedcam_soundtype=2
speedcam_soundtype_4=2
speedcam_warning=1
speak_tts_only=1
speedwarn_alt_builtup_based=1
speedwarn_alt_limit=1
speedwarn_alt_tolerance=100
speedwarn_alt_toltype=1
speedwarn_tolerance=100
speedwarn_toltype=1


2- will do!

also, I had 5196
Hardly worth bothering?
Atasas offline

Member



 
Joined: Sat Feb 12, 2011 11:14 pm
Posts: 196
Has thanked: 0 time
Been thanked: 0 time
Top
Next
Post a reply

Return to Other Systems

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 7 guests

Switch to mobile style
Powered by phpBB® Forum Software © phpBB Group
phpBB SEO
Design: NaviTotal.com © 2015


NaviTotal.com tested by Norton Internet Security NaviTotal.com tested by McAfee Internet Security