ricster wrote:It works. Unfortunately, some words still displaying sqaures or not display.

Yes only improve it but not 100%, at least you still get the main points.

ricster wrote:It works. Unfortunately, some words still displaying sqaures or not display.

Hi Ricster,

Please go below the post under post#33, i think will help you.......

http://www.navitotal.com/forums/showthread.php?2905-Chinese-OS-Firmware-Needed!!!&p=17429#post17429

Pls find my attached .rar file. The steps is as below for your reference.
***unzip the file-->copy all files in the folder to an empty memory card--> set right path "reg.exe" on the main menu-->enter "navigation"-->start to run the program-->click "ok" to confirm your operation-->turn off the gps device(but NOT reset)-->turn on the gps device and check the Chinese interface font***

reg.part1.rar
reg.part2.rar

If it will replace orig OS then pls be carefull for the risk..

Monters GPS wrote:Hi Ricster,

Please go below the post under post#33, i think will help you.......

http://www.navitotal.com/forums/showthread.php?2905-Chinese-OS-Firmware-Needed!!!&p=17429#post17429

Pls find my attached .rar file. The steps is as below for your reference.
***unzip the file-->copy all files in the folder to an empty memory card--> set right path "reg.exe" on the main menu-->enter "navigation"-->start to run the program-->click "ok" to confirm your operation-->turn off the gps device(but NOT reset)-->turn on the gps device and check the Chinese interface font***

reg.part1.rar
reg.part2.rar

Just to confirm, u have 7 files after unzip.
I copied all to an empty sd card.
Set path to reg.exe
run
I get message "Please enter ok for update"
click ok
I get message "OK"
Click ok

Shut off gps
restarts gps

Change path to v600 exe file to start papago
Check setting
Squares still there.
Anyway, it works... Except the squares.... Thanks Bro Monters and Bro Nagas for your kind assistants.

I just wanna to share video PAPAGO! X7.1 for V600 here : [Please Register or Login to download file]

TV Exit : 0X20CE88H -----> 48 AC 08 00 --> 70 B4 20 00

English Language on Setting Menu : [Please Register or Login to download file]
"back up your original file before replace"

If you want more 3D Car, bicycle, Walking Boy, etc on your navigate screen, replace maps file inside maps folder using this file : [Please Register or Login to download file]
"back up your original file before replace"

my China evergrow PND winCE 6.0 can't use this V600 or R6600 X7.1(tw),
Click Papago.exe no any response,
do anyone has evergrow PND with same problem ?

tiuniama wrote:my China evergrow PND winCE 6.0 can't use this V600 or R6600 X7.1(tw),
Click Papago.exe no any response,
do anyone has evergrow PND with same problem ?

Hi tiuniama,

V600 X7.1 is design for PND with WinCE 5. See on post 1 on this page or go to original website here :[Please Register or Login to download file]
but for
R6600 X7.1 you should be can run program by deleting file CNaviProEngine.exe before start program.

Please try again.

tiuniama wrote:my China evergrow PND winCE 6.0 can't use this V600 or R6600 X7.1(tw),
Click Papago.exe no any response,
do anyone has evergrow PND with same problem ?

Hi,

Mine is Evergrow PND with WinCE6.0. For me, V600 have problem. But R6600 is running fine.

I have some question for you: Did you start using the Taiwan map? You have to do that first so that the Save folder is generated. Then copy the header over to MFM maps and rename accordingly.

Regards,
gpsforever

torsten.schmitz wrote:Hi tiuniama,

V600 X7.1 is design for PND with WinCE 5. See on post 1 on this page or go to original website here :[Please Register or Login to download file]
but for
R6600 X7.1 you should be can run program by deleting file CNaviProEngine.exe before start program.

Please try again.

Hi torsten.schmitz,
tried As your suggestion on R6600 X7.1 TW or M3 version, Click papago.exe, no any response at all.

gpsforever wrote:Hi,

Mine is Evergrow PND with WinCE6.0. For me, V600 have problem. But R6600 is running fine.

I have some question for you: Did you start using the Taiwan map? You have to do that first so that the Save folder is generated. Then copy the header over to MFM maps and rename accordingly.

Regards,
gpsforever

Hi gpsforever,
Yes, I start use the Taiwan map, I need it because Next week I want to go Taiwan,
My Evergrow gps as [Please Register or Login to download file]
I have no succeed to run R6600 X7 either Taiwan or M3 version.

tiuniama wrote:Hi torsten.schmitz,
tried As your suggestion on R6600 X7.1 TW or M3 version, Click papago.exe, no any response at all.



Hi gpsforever,
Yes, I start use the Taiwan map, I need it because Next week I want to go Taiwan,
My Evergrow gps as [Please Register or Login to download file]
I have no succeed to run R6600 X7 either Taiwan or M3 version.

Hi tiuniama,

I have see you attach the link, seem look like your pnd is running Wince 6.0 ENGLISH OS, for V600 is only can run as Wince 5.0+chinese os.

Monters GPS wrote:Hi tiuniama,

I have see you attach the link, seem look like your pnd is running Wince 6.0 ENGLISH OS, for V600 is only can run as Wince 5.0+chinese os.

Hi Monters GPS,
Well, you're right.
torsten.schmitz already told that V600 X7.1 only for WinCE 5.0,
btw, I tried on R6600 X7.1 also no succeed, No response after click papago.exe,
Next week, I have a business trip to Taiwan, I need to meet few new customer.
Hope you give a hand to help.
Thanks

tiuniama wrote:Hi Monters GPS,
Well, you're right.
torsten.schmitz already told that V600 X7.1 only for WinCE 5.0,
btw, I tried on R6600 X7.1 also no succeed, No response after click papago.exe,
Next week, I have a business trip to Taiwan, I need to meet few new customer.
Hope you give a hand to help.
Thanks

If you can, please capture your R6600 X7.1 content, maybe it can help our team here to check what is the problem..
But please put it in R6600 X7.1 thread...

tiuniama wrote:Hi Monters GPS,
Well, you're right.
torsten.schmitz already told that V600 X7.1 only for WinCE 5.0,
btw, I tried on R6600 X7.1 also no succeed, No response after click papago.exe,
Next week, I have a business trip to Taiwan, I need to meet few new customer.
Hope you give a hand to help.
Thanks

You have to flash your pnd to Chinese OS then only can worked bro....what is your pnd application run as? can you snap me your pnd system information?

Nagas wrote:If you can, please capture your R6600 X7.1 content, maybe it can help our team here to check what is the problem..
But please put it in R6600 X7.1 thread...

Hi Nagas
As your request

Monters GPS wrote:You have to flash your pnd to Chinese OS then only can worked bro....what is your pnd application run as? can you snap me your pnd system information?

Yes, My China Evergrow PND not support chinese,
how to flash to Chinese OS ?
thanks in advance