kleobis wrote:Sucro, looking for the file in internet, I found it. Here you have the adress if anybody need it [Please Register or Login to download file] .
I could install it and it works!!
You are a genious!
Another two questions.
Can you add another language? and buy the end, I take care that my gps is near 50 meters late it means, it marks a position, freezes and then jumps to a new location.
Is it possible a solution?
Regards
Kleobis

Great, i'm glad to hear that ! No, i'm not genious, i'm sucro ... Anyway thanks!

Yes, i know for that problem with time lag, unfortunately that's problem of this cracked version... Karagiosis didn't make some fix for that problem, cause that's not oficially version for win ce by garmin...

kleobis wrote:Sucro I read the Forum and I´ve resolved the language item. Thanks the same. Only rest about that the gps is near 50 meters late it means, it marks a position, freezes and then jumps to a new location.
Regards
Kleobis

please share with other people here about solution for language, if you speak for changing menu language in diferent language than english and chinese?

Solution for that time lag for now doesn't exist...

barbiearg wrote:Hello downunder!

i was able tu run the garmin soft on my unit..but ..after it runs..starts checking for satelites...can get satelite and then when pressing "where to/address...i get this :
"detailed maps are requiered to use this feature"

i put on the gmapsupp.img with maps of my country inside the garmin folder...and my unit shows once getting inside "settings/about" IMEI :1111111111 and then another number of 8 digit below..as card id.

i tried generating sw.unl for both...tried using the original sw.unl (checked all files setting) ...

but nothing...i still get the "no map" message below the screen where the car is once i click "view map" is like as if i wouldnt have loaded any map at all...

what should i try??? any ideas?

thanks a lot!!
Barb.

Put map with title GMAPSUPP.IMG , find unlocked .IMG file and just copy-paste in Garmin folder on your SD CARD. Use CARD ID, copy-paste it in JETMOUSE keygen which you can find in Garmin software section, then generate key for GARMIN XT , generated key copy - paste in notepad, with option SAVE AS in notepad, for SAVE AS TYPE choose ALL FILES, and give name to that file SW.UNLG !

Another solution, use 0 for CARD ID and then generate key from jetmouse with that number and save as described above sw.unl, not sw.unl.txt file!

The solution is quit simple: you must rename the voice
For example if you want an specific voice in spanish, you must change the name: Espanol_European_.vpm, by English_American_.vpm.
So you cheat the Gramin program. The name is American, but the language is spanish:dance:
Regards
Kleobis

kleobis wrote:The solution is quit simple: you must rename the voice
For example if you want an specific voice in spanish, you must change the name: Espanol_European_.vpm, by English_American_.vpm.
So you cheat the Gramin program. The name is American, but the language is spanish:dance:
Regards
Kleobis

I know for that solution i talked for sharing with other members here , i though that you spoke about changing menu language instead voice language... Menu language for now isn't possible to change , just english and chinese menu langs...

Enjoy in spanish

Greetzz

Hello, sorry for the English I am using a translator. I request please help, I recently bought a GPS Whitson, Chinese 800 * 480, with WinCE 5.0.
I downloaded the software from Downunder, I installed the garmin on my team, tested in all versions, router to start, RunGMXT/Garmin.exe.
But when you press the Navigation button, nothing happens, does not open the Garmin. If anyone has a suggestion, please put it in the forum.

- I tried the same SD, in another Gps Whitson, oldest, with a resolution of 320 * 240 and the Garmin works perfectly,

Miguel de Arequipa - Peru

Miguelious wrote:Hello, sorry for the English I am using a translator. I request please help, I recently bought a GPS Whitson, Chinese 800 * 480, with WinCE 5.0.
I downloaded the software from Downunder, I installed the garmin on my team, tested in all versions, router to start, RunGMXT/Garmin.exe.
But when you press the Navigation button, nothing happens, does not open the Garmin. If anyone has a suggestion, please put it in the forum.

- I tried the same SD, in another Gps Whitson, oldest, with a resolution of 320 * 240 and the Garmin works perfectly,

Miguel de Arequipa - Peru

Not problem for your english, the most importan thing here is that we can understand each other ! First of all, provide us more details when you ask for help, you didn't write the most importan thing, that's how is recognized your sd or micro-sd card by your device? If it's recognized like Storage Card, MMC Storage, etc, then use appropriate version according to your device !?

Our dear friend downunder made 4 variation - packed garmin xt 800x480 depended how is sd card-micro sd card recognized by some of 800x480 devices

http://www.navitotal.com/forums/showthread.php?2329-Garmin-Mobile-XT-CE-for-Chinanavi-with-800x480

another thing, some of manufacturers sell 5" items with 480x272 resol, are you sure that your device is 800x480?

If your device is unlocked, and you can access to windows ce, then through file explorer go directly in folder \Apps\WM where is located QUE.EXE and try to run it manually from there, just to see is everything ok by your os!

Hello,
The characteristics of my team are here [color="darkorange"]http://www.witson.com/view_pro.php?id=1464[/color]
do not know how the computer recognizes my card, so I tested with 4 versions of Downunder, but when I press the navigation key, the screen just flashes

Miguelious wrote:Hello,
The characteristics of my team are here [color="darkorange"]http://www.witson.com/view_pro.php?id=1464[/color]
do not know how the computer recognizes my card, so I tested with 4 versions of Downunder, but when I press the navigation key, the screen just flashes

then, ask the seller how is sd card reconized by your device, like SDMMC, STORAGE CARD, etc etc. !

It should be possible to change the USB settings on the device.
It is by default on memory access (card reader) by can be set to Active Sync. allowing you to see the drive letters and names directly in the Windows Explorer when connected.
But these all in one devices often use havily modified systems, so it is quite possible that it uses modified DLL files that Garmin can't access.
Check for the right version and than run the QUE.exe directly from the CE Explorer.
Than you might see an error message what would help us.

Downunder35m wrote:It should be possible to change the USB settings on the device.
It is by default on memory access (card reader) by can be set to Active Sync. allowing you to see the drive letters and names directly in the Windows Explorer when connected.
But these all in one devices often use havily modified systems, so it is quite possible that it uses modified DLL files that Garmin can't access.
Check for the right version and than run the QUE.exe directly from the CE Explorer.
Than you might see an error message what would help us.

nice suggestion , i forgot totally about ms active sync option, it seems i need some relaxation... Some of gps devices have problems with syncronization, and ms active sync or on new win OS-s windows like Vista, Win7, Windows Mobile Device Center can't see gps device, for example some of mio gps devices..

But anyway miguelious try this suggested by downdy !

Downunder35 and Sucro.
Do you remenber that I asked because I set the time of the radio, but in that part of the navi, navigation program (garmin xt) takes the system time, which has nothing to do with real and therefore does not work automatic switching day / night in the browser
Surfing in the web, I found [Please Register or Login to download file] .
Here they wrote:
Solution to the mismatch of the time zone wolfncu
As you know the wolfncu comes with the default time zone of korea, in a Russian forum I found this script and I have adjusted to our time zone
Download here

Code:
[Please Register or Login to download file]
[Please Register or Login to download file] employment, unzip and copy the folder in the root TimeCore of sd in the skin of wolfncu that we give the function as the clock;
[ButtonTime]
Action = \ MMC_STORAGE \ TimeCore \ TimeCor.exe
Motion = DISPLAY-TIME
Mark the route that is where the spell time Temne
This script is designed to work with MMC_Storage for other storage card names need to change the corresponding line in the file timecor.mscr
Now simply clicking on the hour and we will leave here the correct.
If you think that this may be a solution, please tell me

Regards
Kleobis

As long as it work for I don't see a problem, but it should be possible to include the registry settings for the timezone into a normal mortscript.
Test it out and if it solves the time problem feel free to write a short tutorial so that other users know how to get it working.

Downunder35, I ´ve tried in many ways to look for a solution, but I´ve a doubt.
Here:
[color=red]RegWriteDWord("HKLM","Software\Microsoft\Clock","AutoDST","1")[/color]
Run("\StorageCard\TimeCor\szt.exe"," /t-3 /ru")
folder = SystemPath("ScriptPath")
Run( "\StorageCard\Navitotal\Menu.exe" )
in red line, I can´t find where is the clock, that we see in the right inferior angle, so I don´t know what to write:helpsos:.
Maybe I´m wrong and there is nothing to do.
I ´ve written today to the my equipment reseller asking about the difference between the real time and the UTC, instead I fix -3 GTM hour (Argentine time).
I hope he can give a solution. If he give one, I´m going to post it here.
Regards
Kleobis

kleobis wrote:Downunder35 and Sucro.
Do you remenber that I asked because I set the time of the radio, but in that part of the navi, navigation program (garmin xt) takes the system time, which has nothing to do with real and therefore does not work automatic switching day / night in the browser
Surfing in the web, I found [Please Register or Login to download file] .
Here they wrote:
Solution to the mismatch of the time zone wolfncu
As you know the wolfncu comes with the default time zone of korea, in a Russian forum I found this script and I have adjusted to our time zone
Download here

Code:
[Please Register or Login to download file]
[Please Register or Login to download file] employment, unzip and copy the folder in the root TimeCore of sd in the skin of wolfncu that we give the function as the clock;
[ButtonTime]
Action = \ MMC_STORAGE \ TimeCore \ TimeCor.exe
Motion = DISPLAY-TIME
Mark the route that is where the spell time Temne
This script is designed to work with MMC_Storage for other storage card names need to change the corresponding line in the file timecor.mscr
Now simply clicking on the hour and we will leave here the correct.
If you think that this may be a solution, please tell me

Regards
Kleobis

What mapset do you use? For timezone problems, you can use gmaptz.img, put it in garmin folder with other .img file...

I know for wolf utility, you can use it, it's ok shell unlock...

P.S.

detailed about editing settings for time zone through registry, daylight saving time etc. for win ce versions...

[Please Register or Login to download file]

[Please Register or Login to download file]

[Please Register or Login to download file]


[Please Register or Login to download file]

you can use ceregeditor

[Please Register or Login to download file]

Check [Please Register or Login to download file] , I think the first 5 or 6 hits should be of interest.
That should help to get the right registry keys and settings