Garmin Mobile XT CE for Chinanavi with 800x480

I have install Garmin Mobile XT CE for Chinanavi with 800x480 on my PNA Diret DT560 look like working, but default lang. is china, i have change to English, but every time when I run Garmin I have to readjust setting, exist some kind of possibility to save my setting???

Please read the first post completely and maybe a few that followed.
Your problem is explained in detail in this thread so no need for a new posting especially if half of the info we need is missing in it.

I think it should be possible.
Have you checked post 73 ?
I have not played around much with it as I only use it on the boat and might go back to use Ozi Explorer again with the Bluechart I converted but all is set up to the asian standard in the software.
It might be possible that for your device a different setting is needed and if post 73 is of no help I will try to find a way to get the garmin keyboard working by default but I can't make any promises

hi! i already download this garmin mobile xt,went i run garmin exe, my gps is hang ,can't not program,need reset for work.
what problem for my gps?

china brand

AtlasIV 500MH
ram: 4GB

No idea!
This release runs fine on any official CE system including CE emulators on the PC.
So I can only assume that it is a device specific problem since you have not provided any details.
Possible that you device needs a port splitter - no idea without more info.

I'm not artful but what do you mean by too small?
Maybe a look in the [Please Register or Login to download file] can help ?
It is for the original WM version but most of it should be valid.

Don'T forget that Garmin uses the full resolution of your screen!
That means a road will look finer and signs can be smaller due to the higher resolution.
It is not like with Tomtom where you have a fixed size for all in most zoom levels, Garmin always uses a very fine strukture for all that - most people prefer it that way.
You can adjust the size of the labels in the settings for the map but not the actual map display itself as far as I know.

Downunder35
Hi, Like you can see, I´ve taken a fews days to investigate about the hour.
I find this script, this puts the time zone and car´s time setting when the GPS satellites detected.

RegWriteDword("HKLM", "\Software\Microsoft\Clock", "AutoDST", 1)
RegWriteBinary("HKLM", "Time", "TimeZoneInformation", "C4FFFFFF52006F006D0061006E00630065002000530074006 1006E0064006100720064002000540069006D0065000000000 000000000000000000000000000000000000000000A0000000 50003000000000000000000000052006F006D0061006E00630 0650020004400610079006C006900670068007400200054006 9006D006500000000000000000000000000000000000000000 0000000000300000005000200000000000000C4FFFFFF")
RegWriteMultiString("HKLM", "Loader", "SystemPath", Array( IniRead("Autorun.ini", "Sys","DllPack"), IniRead("Autorun.ini", "Sys","SysExe"))
RegWriteString("HKLM", "Time", "Dlt", "Romance Daylight Time")

I don´t know if it works, and the most important thing, I don´t know how to adaptate to your fabulous program.
If you think that is posible...
Sorry for my insistence but if I can help you improve, I do with taste
Regards
Kleobis

i have dvd player using wince 6.0... the garmin don't be unlock
i try us generate by using unit id on my player but still lock

Why are you posting this question in different threads?
Since you not providing any info it is impossible to help you.
If you use my version than please read the instructions.

kleobis wrote:Downunder35
Hi, Like you can see, I´ve taken a fews days to investigate about the hour.
I find this script, this puts the time zone and car´s time setting when the GPS satellites detected.

RegWriteDword("HKLM", "\Software\Microsoft\Clock", "AutoDST", 1)
RegWriteBinary("HKLM", "Time", "TimeZoneInformation", "C4FFFFFF52006F006D0061006E00630065002000530074006 1006E0064006100720064002000540069006D0065000000000 000000000000000000000000000000000000000000A0000000 50003000000000000000000000052006F006D0061006E00630 0650020004400610079006C006900670068007400200054006 9006D006500000000000000000000000000000000000000000 0000000000300000005000200000000000000C4FFFFFF")
RegWriteMultiString("HKLM", "Loader", "SystemPath", Array( IniRead("Autorun.ini", "Sys","DllPack"), IniRead("Autorun.ini", "Sys","SysExe"))
RegWriteString("HKLM", "Time", "Dlt", "Romance Daylight Time")

I don´t know if it works, and the most important thing, I don´t know how to adaptate to your fabulous program.
If you think that is posible...
Sorry for my insistence but if I can help you improve, I do with taste
Regards
Kleobis

Kleobis,

I have a similar radio to the one you posted, i thinkis the same factory to make them.
I will give you a silly solution but sometimes this solutions are the ones you just pass over.
On my device the system time and the gps configures from diferent places.
The system time you can configure it on the configuration of the radio but if you go to navi and then enter to the configuration of the navi where you select the path to load and the other things you have another time that it does not update from the system time.
Try to see if your radio works the same way as it should be the same factory.

Let me know if you need more help or upload some pictures ofthe navi configuration to see if its the same one that i have.

Good luck

Hi, I have similar problem with my storage card which name "ResidentFlash", after follow the given solution now I can launch my Garmin but new problem occurred due to it can't find the GPS so I guess it cause from QUE.EXE? so could you please help me with SD card name "ResidentFlash"

Big thanks.

Go to the GMTX folder, and you must look for Garmin.exe, this is the one that launch the program, not Que.exe.
Regards
Kleobis

Jbrande. Yes is the same system.
Today I was with a friend who is an engineer who has the same program, and problem , and he said to me that he is going to write un script to fix the hours.
When I have it, I promise that I´ll post it.
Regards.
Kleobis

MS001 wrote:Hi, I have similar problem with my storage card which name "ResidentFlash", after follow the given solution now I can launch my Garmin but new problem occurred due to it can't find the GPS so I guess it cause from QUE.EXE? so could you please help me with SD card name "ResidentFlash"

Big thanks.

First of all, ResidentFlash in most of cases is name of Internal memory !!! Are you sure that's SD CARD or you have added Garmin XT on your Internal Memory - flash memroy?

Put Garmin XT on SD Card, then try to run it from there! How is recognized SD CARD by your device?