Downunder35m wrote:Only other iption would be to use a mortscript to add the DLL files into the system and to register them.

I know how to add the dll's to the system, but please tell me, how can I do to register them?

thanks again...

Hi, Very good version.
Just tried, without success, to add another language following directions found here: http://www.navitotal.com/forums/showthread.php?1067-Language-files
Any help will be greatly appreciated,

Thanks and keep up the good work.

Downunder35m wrote:Only other iption would be to use a mortscript to add the DLL files into the system and to register them.

adrix000 wrote:I know how to add the dll's to the system, but please tell me, how can I do to register them?

thanks again...

anybody...???

adrix000,
Maybe the following link could help:
[Please Register or Login to download file]

The precess of registering is only needed for few DLL files.
Usually it is enough to copy the files into the Windows folder right after startup.
The big problem is that you need to know which files are missing and sometimes you have the DLL already on your system but is was modified by the manufacturer.
I'm afraid that there is no "final solution" to get Garmin working on all devices :(
As far as I know all DLL files needed for Garmin are included in the pack, and if it is complaining about DDL's or tells you that you have the wrong system I would say the CE is too limited.

You can try an emulator and run Garmin on you PC to check if you have missing files there too and maybe to figure out what is missing on your device.

Hello everyone,
This is my first speech at the forum, which I think is excellent, I apologize for the English, is that I write through a translator.
I purchased a brand GPS Whitson, Chinese, and their characteristics are:

Supported map: Route66, TOMTOM, IGO, Destinator etc.
Operation system: Windows CE 5.0
Processor: SAMSUNG High performance processor S3C2440A-40 400MHZ frequency Max.main.
EMS Memory: 64MB SDRAM
Storage device: 128MB NAND FLASH, Support SD Card.
Display output: CVBS S-VIDEO output. (Resolution: 800 * 480) or simulation RGB output.
Audio output: Stereo output of CD tone.
GPS specification: Adopt SiRF STAR III 20 channel high sensitivity GPS and Excessive Receiving module REB-3310, Orientation sensitivity reach-159dBm, Orientation Precision <10M, Orientation time of cold boot is 42S, Orientation time of warm boot is 35S, Orientation time of hot boot is 1S.
Power specification: Connect car power DC12V, Current <500mA; Max power
Consumption: 4.5W (12V/360mA) Normal Power Consumption 3W (12V/250mA).

I have everything ready on my PC to install GPS, the problem is not how to enter the software on your computer Whitson.
Adrix000, please tell me like you did, try to do it from the SD but does not open anything on the screen, I think I have to do it via ActiveSycn?
please help

Miguelious

Please, another question, it can install the Navitel in this kind of equipment?

Thanks

Miguelious

possible use this version in Thai Lang interface & voice ?

wonna ... Pls.

ksilenser wrote:possible use this version in Thai Lang interface & voice ?

wonna ... Pls.

you can't change interface lang in that cracked garmin xt for win ce version, for voice , download garmin thai voice (.vpm file), and just put it in voice folder...

here

http://www.navitotal.com/forums/showthread.php?1063-ALL-Voices-for-Garmin


you can download thai voice .vpm file

Can this version run on my double din 480 x 234 device?

matthewong wrote:Can this version run on my double din 480 x 234 device?

This version is for 800x480 devices, like title of thread says!

What's OS on your device, provide us more details, and thex expect more help !

Check these threads for your device, and try some of these versions on your device

http://www.navitotal.com/forums/showthread.php?1274-Garmin-Mobile-XT-for-WinCE5.0-program

http://www.navitotal.com/forums/showthread.php?1278-Garmin-Mobile-XT-v5.00.30w-ASN-for-Windows-CE-6.0

http://www.navitotal.com/forums/showthread.php?1276-Garmin-Mobile-XT-v5.00.20w-for-Windows-CE-6.0

sucro wrote:you can't change interface lang in that cracked garmin xt for win ce version, for voice , download garmin thai voice (.vpm file), and just put it in voice folder...

here

http://www.navitotal.com/forums/showthread.php?1063-ALL-Voices-for-Garmin


you can download thai voice .vpm file

ohhh very thank ...

Now . . i can use thai voice in this version

( But ... why not select thai voice in menu ... i'am rename thai.vpm to english.vpm .... that ok ^_^)

okey thai interface is not possible ...

but .. possible to use font thai for read Thai map (TSM 10.1_TH) and thai keyboard for search ??

now.. I'am use this version-- Eng interface + thai map EN (TSM 10.1_EN) + Chinese keyboard (for search in eng lang)

that dificutly for me -_-;

very thank again ^_^

Hello
I have a Toshiba PDA phone with integrated GPS TG01 800x480
Windows 6.5, Igo primo1.1 and Garmin Mobile XT for Windows Mobile + v.5.00.20w Basemap works on this device.
Can I run this version of Garmin XT?
Thank you for your reply
Excuse me for my english I used a translator

I followed the procedure mentioned above, but I do not understand the following sentences:


[color=red]Make sure you have ticked "in all sub-folders"
Click on "replace in files" and confirm.
All entries will be replaced and it should work correctly after you copied all to your SD[/color]

Tutoriales, nuevas guias y descargas, todo en Español creado por mi mismo en esta direccion --> [Please Register or Login to download file]

Todos los creditos para Downunder35m
All credits for Downunder35m

Just to clear up some of the confusion in regards to this release :
It is optimised for Hi-Res devices, but the software should run fine on all CE devices that are not too limited in terms of the Windows system.
But most of the other releases don't run on 800x480, so anyone can try and report back if it is working.

I followed exactly the tutorial installation but when I click Storage Card.exe knew nothing happens, I tried it with Garmin.exe it is not working. I do not understand this:

]"" "Directory": Browse for the Folder WHERE you unpacked the archive!
[color=red]Make sure You Have ticked "in all sub-folders"
Click on "replace in files" and confirm. ""[/color]