@obeids : The different versions are the same except for the paths of the SD card.
Since it all works fine on most devices including the MS CE Emulator it seems you have missing system files on your device.
I have 3 different noname devices (1 YATLAS) and they all work fine.
You can try use a dependency scanner to check if you have to add some dll files.
A good way to be sure a noname device will have most files is to check if it supports a complete CE desktop (unlocked and accesible throught the normal menu) with Word and a PDF viewer.
Also make sure you put all in the folder "Garmin" in the root of your SD card- otherwise it won't work.

@bryanchew : I've seen this problem in a few forums but so far I have newer heard of a solution.
Have you tried a different map to make sure it is no problem with the one you are using?
Is the basemap working?

I cannot download from megaupload, cannot open it...
Can someone upload it on some other hosts as rapidshare, mediafire od something else, thanks in advance

The links are working fine, so no need to upload elsewhere, if however, a user want to provide a mirror than it is fine with me.
In the meantime I suggest that you learn how to download files and use a packer.

What's the default COM and Baud that comes with this version/package? I'm having problem with the Map so I'm trying to install Papago on it, but I don't know how to get the COM and Baud as my ChinaHU doesn't allow me to access the OS.

hi guy, its work on my device. but after when i exit it the garmin from my device. after i on back, it go back to the default for chinese langauage......may i know how to keep the setting for forever?

thanks

The com port and Baud rate should be working on autodetect.

If you loose your settings than it is most likely that you use the wrong version, but that is only guessing....

Hi Downunder,
Firstly thanx for all your effort,we appreciate!
I recently bought a Chinese doubledin-800x480 car/dvd/Gps unit,link to unit --> [Please Register or Login to download file]
It has 128mb ram of memmory,I don't know where to find out what type of cpu it has?

I tried several versions of Garmin xt on it and it failed to start at all,except one I found on a local site(don't know their source,so can't comment on the version of Garmin).The only problem I found on that version is that it crash on "where am I" and "poi search".
I tried your version(StorageCard) as my unit identifies the sd-card in Total Commander as "StorageCard" ,I also ran your app,NaviTotal(nice app by the way;) ) with success and could run foxit,mobipocket etc..with no probs.
Your Garmin version couldn't start at all,I excecuted Garmin.exe and Que.exe from default Navi in unit and via Total commander.In totalcommander nothing happens,except I get a error message which is in Chinese when I excecute Que.exe

I would appreciate if you can tell me where I went wrong with your version or if you have advise as how to fix the "poi search crash" in the other version I have.
Thanks in advance

I have this problem, picture will explain by itself...



And my device is:

Code: Select all

CPU：SiRF Atlas-IV, 500MHz  AT840
LCD：6.0＂TFT(800*480) 4-line resistance touch screen
OS：Win CE  6.0  SDRAM: 128M
Built-in antenna/Game / Calculator / Digital Photo Album
Support files: RM/RMVB/WMV9、Mpeg4、Asf 、AVI、Mp3、Wav 、Jpg、Gif、Bmp、TXT.
Support TF Card slot(max.8GB)
Support Blue-tooth / FM Transmitter / AV-in
Support DVB-T/ISDB-T                                   Build-in Nand Flash4GB
Size：156*101*13.5mm   Weight:250 g
 Battery:1500mAh      COMMPORT=COM1
BAUDRATE=4800                                                                                       

And I dont have a problem viewing the 3D mode, it is just fine:



So is there any solution?
Thanks in advance!

@ Phrozin:You might want to check if you have any missing DLL files, Dependency walker is quite good for that.
If still no luck and all is installed correctly than your device might be incompatible.
There arestill some devices out there with a CE system that is too modified for Garmin.
It runs fine on all standard installations and inside the Microsoft CE emulator.

@ no_name:Not sure what is causing this problem, it looks like the font is too big or misaligned.
Is that all over the menu or just for your POI`s?

no as you can see on 3D view it is ok, and also for the menu, just for the POI....
here is some pictures of menu



and also when i want to spell a name of city or country... its open a WinCe6 small keypad rather the Garmin's one...?
p.s.
thanks for the fast respond

hi..i had same problem...running on 7" pna mtk platform ...for small keyboard error...go to setting..>display..>keyboard and tick the first box...any way thank
for the happy file....

no_name wrote:no as you can see on 3D view it is ok, and also for the menu, just for the POI....
here is some pictures of menu



and also when i want to spell a name of city or country... its open a WinCe6 small keypad rather the Garmin's one...?
p.s.
thanks for the fast respond

http://www.navitotal.com/forums/showthread.php?2329-Garmin-Mobile-XT-CE-for-Chinanavi-with-800x480/page7

I cant download from link "http://www.navitotal.com/forums/noref.php?url=http://protect-my-links.com/?id=j2a881b1" They seys wrong capcha, but it is not thru. Please upload on other link.

Dear Downunder

Thank you for software. It works well. However, I also found similar problems as above persons:
1 When click Option button, the system will be crashed. This is not 100% occured but 95%, only 5% OK.
2 Text of search result is too big.
3 in 2D road size is too thin.

I run it on YF PNA Sirf IV 128MB 500MHz. If run on YF shell, it become very slow. Must quit shell and run
on WinCE.

I try with many Garmin versions (Artful, ....) but there are same problems.