Universal Firmware Patcher for Protected Garmin Devices   

Re: Universal Firmware Patcher vs SD Card Unlock Kit

Postby GarminNuvi » Fri Oct 04, 2019 8:49 pm

@flinserl1

Where did you get the Patch ?
It is imperative you check your HWID is the same as below

<PartNumber>006-B2269-00</PartNumber>
<SoftwareVersion>590</SoftwareVersion>
<Description>DriveLuxe 50</Description>


DriveLuxe 50 fw5.90 Patch kit FWID 2269 ONLY
Code: Select all
https://anonfile.com/U4Y5Db73nf/DriveLuxe_50_2269_fw5.90_rar


Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card into device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.
Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2099
Location: On the move
Has thanked: 170 times
Been thanked: 4225 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby GarminNuvi » Fri Oct 04, 2019 9:50 pm

jorgiyo wrote:hi my friends!
please, I need patch for 2588 and 6.20...
Muchas gracias desde Argentina!! I read you... :023:

sorry!
is for Drive Smart 61. Tanks!!


DriveSmart 61 FW 6.20 HWID 2588 ONLY
This board requires you to be registered and logged-in to view hidden content.


Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card into your device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.
Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2099
Location: On the move
Has thanked: 170 times
Been thanked: 4225 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby GarminNuvi » Tue Oct 08, 2019 9:57 pm

NICOLAS1409 wrote:Hi , I'm french so forgive me for my bad written english,
There is something weird happens to me with tha map I dowload here :
both north america NT 2020.20 ( lower version) and 2019.30 works perfectly on my very old NUVI 860 ( from 2008 !)
I put the gmapsupp.img on a garmin folder on my sd card and all is ok

then I put the same card on my new garmin drive 51 lmt-s and I have a french message said " Mpas are corrupted and can't be used. go to garminexpress.com....."

My old nuvi don't work perfectly ,the tactil screen is not very responsive , ...
that's why I would love to take my drive51 .
it's for an raodtrip from SF to LV and more.

I try to unlock the file with the .exe we all know but still the same message

What goes wrong ith the drive 51 ?
thank you for your response


Your device will need to be Patched to use Unlocked maps
Check in your Garmin folder for garmindevice.xml open with Notepad and Find and confirm your HWID number

<PartNumber>006-B2586-00</PartNumber>
<SoftwareVersion>620</SoftwareVersion>
<Description>Garmin Drive 51</Description>

Only when you have confirmed the HWID 2586
you can use this SD card Patch kit
This board requires you to be registered and logged-in to view hidden content.


Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card into device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.
Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2099
Location: On the move
Has thanked: 170 times
Been thanked: 4225 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby Piven » Wed Oct 09, 2019 9:25 am

Hi gents,
Could you please send me the firmware patched?

<Model>
<PartNumber>006-B2268-00</PartNumber>
<SoftwareVersion>590</SoftwareVersion>
<Description>Drive 60</Description>
</Model>
Piven offline


Junior Member



 
Joined: Wed Oct 09, 2019 8:17 am
Posts: 2
Has thanked: 1 time
Been thanked: 0 time

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby arvi 1 » Wed Oct 09, 2019 12:19 pm

Hi.Does anyone have EHOMAP 52DV unlocked firmware?
arvi 1 offline


Junior Member



 
Joined: Tue Mar 08, 2011 4:20 pm
Posts: 82
Has thanked: 3 times
Been thanked: 50 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby fredderf » Wed Oct 09, 2019 2:23 pm

arvi 1 wrote:Hi.Does anyone have EHOMAP 52DV unlocked firmware?


Do not post the same message multiple times across the board...it won't help to get your answer any quicker but it could get your account suspended!
fredderf offline


Administrator



 
Joined: Sun Nov 17, 2013 2:23 pm
Posts: 3066
Location: UK
Has thanked: 622 times
Been thanked: 3757 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby GarminNuvi » Wed Oct 09, 2019 8:23 pm

Piven wrote:Hi gents,
Could you please send me the firmware patched?

<Model>
<PartNumber>006-B2268-00</PartNumber>
<SoftwareVersion>590</SoftwareVersion>
<Description>Drive 60</Description>
</Model>


Drive and DriveSmart 60-70 fw 5.90.rar HWID 2268 ONLY\
This board requires you to be registered and logged-in to view hidden content.

Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.

Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2099
Location: On the move
Has thanked: 170 times
Been thanked: 4225 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby Piven » Thu Oct 10, 2019 7:30 am

Thank you very much!!! All work good
Piven offline


Junior Member



 
Joined: Wed Oct 09, 2019 8:17 am
Posts: 2
Has thanked: 1 time
Been thanked: 0 time

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby bryans81 » Thu Oct 10, 2019 7:48 am

Hi, new to trying to put the firmware patcher on and getting quite confused, hoping for some help/guidance... I had seen in a previous post about the 2587 though it was the 600 version not the 620 (6.2). Tried the link before the unit was 6.2 (which was 6.0) but it just kept going to the uploader (mega.nz) homepage and not an actual file....or am going about this all wrong, thanks for any help in advance.

<Model>
<PartNumber>006-B2587-00</PartNumber>
<SoftwareVersion>620</SoftwareVersion>
<Description>Garmin Drive 61</Description>

edit: I am solely using a Mac and don't really have any access to a PC.


Thanks

Bryan
bryans81 offline


Junior Member



 
Joined: Wed Oct 09, 2019 4:15 am
Posts: 2
Has thanked: 2 times
Been thanked: 0 time

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby GarminNuvi » Thu Oct 10, 2019 7:52 pm

bryans81 wrote:Hi, new to trying to put the firmware patcher on and getting quite confused, hoping for some help/guidance... I had seen in a previous post about the 2587 though it was the 600 version not the 620 (6.2). Tried the link before the unit was 6.2 (which was 6.0) but it just kept going to the uploader (mega.nz) homepage and not an actual file....or am going about this all wrong, thanks for any help in advance.

<Model>
<PartNumber>006-B2587-00</PartNumber>
<SoftwareVersion>620</SoftwareVersion>
<Description>Garmin Drive 61</Description>

edit: I am solely using a Mac and don't really have any access to a PC.


Thanks

Bryan

All my Mega files where TAKEN down
No PC required to patch device with SD card Parch kit,just follow the instructions.
DriveDriveSmart61_620_Patch SD card kit For ONLY HWID 2587
This board requires you to be registered and logged-in to view hidden content.


Instructions
Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.

Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2099
Location: On the move
Has thanked: 170 times
Been thanked: 4225 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby bryans81 » Thu Oct 10, 2019 11:24 pm

You my friend, are an absolute legend!!!!

Thanks so much. All seems good testing it in Aust. now for the trip to the USA.

Cheers

Bryan
bryans81 offline


Junior Member



 
Joined: Wed Oct 09, 2019 4:15 am
Posts: 2
Has thanked: 2 times
Been thanked: 0 time

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby GarminNuvi » Fri Oct 11, 2019 3:30 am

bryans81 wrote:You my friend, are an absolute legend!!!!

Thanks so much. All seems good testing it in Aust. now for the trip to the USA.

Cheers

Bryan


If you haven't got the USA & Canada maps and additional files you can get them for your device from
new-maps/city-navigator-north-america-2020-fid-8033-t21333.html#p174259

SD card
SD card:\
Map\
gmapsupp.img
D4919170A.img

Garmin\
SID\
D4954190A.sid
D5571130A.sid
D6505110A.sid
D5567130A.sid
D6504110A.sid

JCV\
D3478280A.jcv

Copy to your device as they work better: .system\SQLite\
D6022100A.db
D4943190A.db
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2099
Location: On the move
Has thanked: 170 times
Been thanked: 4225 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby Hans_M » Wed Oct 16, 2019 8:21 pm

Hi GarmanNuvi!
Could you please provide me a patched firmware for the following device:
This board requires you to be registered and logged-in to view hidden content.


Thank you very much in advance!
Hans_M offline


Junior Member



 
Joined: Sun Jul 18, 2010 8:59 pm
Posts: 1
Has thanked: 1 time
Been thanked: 0 time

SD card Patch Kit (HWID 2267) FW 6.10

Postby GarminNuvi » Wed Oct 16, 2019 10:02 pm

Hi GarmanNuvi!
Could you please provide me a patched firmware for the following device:
<Model>
<PartNumber>006-B2267-00</PartNumber>
<SoftwareVersion>610</SoftwareVersion>


Drive and DriveSmart 40-50 fw 6.10.rar HWID 2267 ONLY
This board requires you to be registered and logged-in to view hidden content.


SD Card Kit
Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.

Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.
Last edited by GarminNuvi on Mon Dec 16, 2024 8:13 am, edited 5 times in total.
Reason: Updated link working 16/12/2024
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2099
Location: On the move
Has thanked: 170 times
Been thanked: 4225 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby arvi 1 » Thu Oct 17, 2019 4:25 am

Hi GarmanNuvi.Please Driveluxe 51 SD patched software.SoftwareVersion 6.20 HWID 2589.Thank you in advance.
arvi 1 offline


Junior Member



 
Joined: Tue Mar 08, 2011 4:20 pm
Posts: 82
Has thanked: 3 times
Been thanked: 50 times

PreviousNext

Return to Software

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 13 guests