Switch to full style
Post a reply

Re: recent Garmin gps mapping installation

Thu Sep 03, 2020 4:33 am

Good morning all,
yes it is true that I did not specify, it would be for the Topo V5 France cards, my device is the new Montana 700, and the FID: 7453, or the Topos CN Europe NTU fid: 4813 cards,
I will read the link you give me, I tried a lot of tips that I used and that worked, but with recent gps this is no longer the case, my Monterra and Oregon 750 supported 64 maps go and I could quickly patch ALL the cards, but this is no longer the case now, on Montana, it only accepts 32gb cards and it no longer wants some patched cards apart from the Osm, some Garmin cards however work, for example "Mountain" cards
HWID is in your garmindevice.xml
<PartNumber>006-B3484-00</PartNumber>
<SoftwareVersion>270</SoftwareVersion>
<Description>zūmo XT</Description>

Unfortunately it looks like Drive, DriveSmart 52,55,65, zumo XT ,Alpha 200i, Montana 700 are all in the same category.
No solution yet as the Universal Firmware Patcher does not recognise the new format.

Invalid Birdseye .jnx fles.

Thu Sep 03, 2020 10:44 am

I have an Etrex 30x and have downloaded a few Birdseye aerial images.
I have saved them to sd card and they open in Basecamp but show as invalid jnx file if I copy them to my device.
Ive searched Etrex 30x, Birdseye, Basecamp and jnx looking to find a way to get round the Invalid file message but I can't find anything.
I there a way to make the jnx files valid so that I can install them on the device?

Re: Invalid Birdseye .jnx fles.

Fri Sep 04, 2020 2:26 am

hiker999 wrote:I have an Etrex 30x and have downloaded a few Birdseye aerial images.
I have saved them to sd card and they open in Basecamp but show as invalid jnx file if I copy them to my device.
Ive searched Etrex 30x, Birdseye, Basecamp and jnx looking to find a way to get round the Invalid file message but I can't find anything.
Is there a way to make the jnx files valid so that I can install them on the device?

Search results "JNX"
eTrex 20x/30x | 2250 | 300 | MAP: Yes | GMA: Yes | MSV: Weak | GVS: --- | File: eTrex20x_30x_Webupdater__300.gcd
MSV: Weak - it verifies the validity of map signatures in a simple way, you can unlock an .img using gimgunlock-0.04 (without patching your firmware), but in case of unicode maps (CP65001) you must modify the CP value
Your device can be Patched for Birdseye JNX this one also fixes MSV Weak
This board requires you to be registered and logged-in to view hidden content.

Download and unpack, eTrexXXx_XXx_Webupdater__XXX_JNX.gcd to your PC where your device is attached.
Then you drag-and-drop eTrexXXx_XXx_Webupdater__XXX_JNX.gcd onto the WebUpdater icon on your desktop.
The Firmware will be flashed on Device
Warning:
Be sure to remove All BirdEyes images (JNX files) already present on device before apply the Patch
BirdEyes images can be restored after patch is applied.

Re: Universal Firmware Patcher for Protected Garmin Devices

Fri Sep 04, 2020 6:24 pm

Hello everyone.... I'm getting the "Cannot unlock maps" message on my Garmin Nuvi 2689.
<PartNumber>006-B1948-00</PartNumber>
<SoftwareVersion>880</SoftwareVersion>
<Description>nüvi 2689</Description>
What's the procedure to unlock it?
Thank you in advanced.

Re: Universal Firmware Patcher for Protected Garmin Devices

Fri Sep 04, 2020 11:48 pm

mwitarsa wrote:Hello everyone.... I'm getting the "Cannot unlock maps" message on my Garmin Nuvi 2689.
<PartNumber>006-B1948-00</PartNumber>
<SoftwareVersion>880</SoftwareVersion>
<Description>nüvi 2689</Description>
What's the procedure to unlock it?
Thank you in advanced.

Welcome to the forum.
This board requires you to be registered and logged-in to view hidden content.

Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.

Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.
Final step

Re: Universal Firmware Patcher for Protected Garmin Devices

Wed Sep 09, 2020 10:21 am

I have echomap 74 .
Maps 2012 work perfect but when i bought another garmin echomap 62 plus , the maps dose not work. ( :022: )
i heard someone opend this device . or how can i let myy garmin echomap 62 plus accept all the maps.
plz give me ways to do this.
i want to put old map to echomap 62 plus

Re: Universal Firmware Patcher for Protected Garmin Devices

Wed Sep 09, 2020 9:25 pm

kingspeis wrote:I have echomap 74 .
Maps 2012 work perfect but when i bought another garmin echomap 62 plus , the maps dose not work. ( :022: )
i heard someone opend this device . or how can i let myy garmin echomap 62 plus accept all the maps.
plz give me ways to do this.
i want to put old map to echomap 62 plus


Search this topic result "echomap"

EchoMAP Plus & UHD v13.20 Patch

Re: Universal Firmware Patcher for Protected Garmin Devices

Wed Sep 09, 2020 9:53 pm

what about garmin drivesmart 65 ?????

Moderator Note
Again !
Use "search this topic"at the top of the page.
Search results "Drivesmart 65"

Re: Universal Firmware Patcher for Protected Garmin Devices

Wed Sep 09, 2020 9:59 pm

GarmanNuvi wrote:
kingspeis wrote:I have echomap 74 .
Maps 2012 work perfect but when i bought another garmin echomap 62 plus , the maps dose not work. ( :022: )
i heard someone opend this device . or how can i let myy garmin echomap 62 plus accept all the maps.
plz give me ways to do this.
i want to put old map to echomap 62 plus


Search this topic result "echomap"

EchoMAP Plus & UHD v13.20 Patch

thank you . but how can i use ?
i do not know. if you have a picture please Explain to me

Moderator Note
This link EchoMAP Plus & UHD v13.20 Patch has the download and another link to instructions to install.
You really have to slow down with the posting before reading.

Re: Universal Firmware Patcher for Protected Garmin Devices

Sat Sep 19, 2020 1:05 pm

Hello,

I have an Alpha 100 and a supposedly unlocked map. However when booting up the device it says "Cannot unlock maps". What do I need to do to unlock a map for an Alpha 100?

Re: Universal Firmware Patcher for Protected Garmin Devices

Sat Sep 19, 2020 11:04 pm

@martincb
Alpha 100 (HWID 1562) has 'weak' MSV protection in firmware, so can use maps with Code Page 1252 (Latin) unlocked with latest gmunlock but need fw patching to use CP 65001 (Unicode) unlocked map data although there are workarounds for that too.

The screen messages when you load incompatible maps have a sense however. "Cannot unlock maps" generally means there's at least one map tile in the data which hasn't been unlocked. "Maps are corrupt and cannot be used" message means that the device needs patched fw to use the map, or the map data has to be manipulated for a 'weak' protected device to use a map with unicode data.

Use GMapTool to check the map data. You may simply need to run gimunlock.exe again to fully unlock it if it's exclusively CP1252 data.

Re: Universal Firmware Patcher for Protected Garmin Devices

Sun Sep 20, 2020 9:40 am

GarmanNuvi wrote:
<PartNumber>006-B2586-00</PartNumber>
<SoftwareVersion>620</SoftwareVersion>
<Description>Garmin Drive 51</Description>

Only when you have confirmed the HWID 2586
you can use this SD card Patch kit
This board requires you to be registered and logged-in to view hidden content.


This link is no longer working.
Please update the link or pm me the file.
Thanks

Moderator Note
Link works fine, you might have to use a VPN if your government or ISP has blocked certain Hosting sites

Re: Universal Firmware Patcher for Protected Garmin Devices

Thu Sep 24, 2020 5:56 pm

<PartNumber>006-B1562-00</PartNumber><
Version>780</SoftwareVersion><Description>Alpha 100 EMEA/APAC</Description>

Any help with this? Cant find it in the search function. Thanks.

Re: Universal Firmware Patcher for Protected Garmin Devices

Thu Sep 24, 2020 7:59 pm

elgosaurus wrote:<PartNumber>006-B1562-00</PartNumber><
Version>780</SoftwareVersion><Description>Alpha 100 EMEA/APAC</Description>

Any help with this? Cant find it in the search function. Thanks.


This board requires you to be registered and logged-in to view hidden content.



[Please Register or Login to download file]

How to install WebUpdater
[Please Register or Login to download file]

Download and unpack Alpha100_780_Patched_JNX.gcd on to the PC where your device is attached.Your desktop is easy

Then you can drag-and-drop Alpha100_780_Patched_JNX.gcd onto the WebUpdater "Short cut icon" on your desktop.
[Please Register or Login to download file]

Re: TOPO Norway Premium

Fri Sep 25, 2020 8:28 pm

How do I unlock this for my Alpha 50 unit? I have tried the included gimgunlock, but Alpha 50 still says my map is locked. I dragged the .img file on gimgunlock when the file before and after transfering the file to my SD-card.
Post a reply