Universal Firmware Patcher for Protected Garmin Devices   

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby superflt » Sat Nov 06, 2021 6:03 am

Hello GarmanNuvi
Please assist to provide a patched firmware for my Garmin Drive 51, many thanks :

<Model>
PartNumber>006-B2586-00
SoftwareVersion>620
<Description>Garmin Drive 51
superflt offline


User avatar Junior Member



 
Joined: Thu Aug 23, 2012 1:49 am
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby AdmNelson » Sat Nov 06, 2021 6:21 am

q8com wrote:Or is there a way to install version 16.10

You can 'force update' the ECHOMAP Plus/UHD 7x/9x by turning off the unit and then starting it by pressing the '4' button and power button at the same time and keeping them pressed until 'recovery region loading - recovery loader ready' text is shown on the display. After that you can release both buttons and the unit will now load the software from the SD card.
AdmNelson offline


User avatar Junior Member



 
Joined: Wed Mar 29, 2017 4:43 pm
Posts: 29
Location: Trafalgar Square
Has thanked: 0 time
Been thanked: 35 times
Age: 55

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby q8com » Sun Nov 07, 2021 9:42 am

The unit that i have is version 17.
Ok then what do i put in the sd card do i put the file version 16? If yes how do i get it because i dont have it.

Moderator Note
You quoted version 16.10 and the link to it
software/universal-firmware-patcher-for-protected-garmin-devices-t17987-810.html#p184337
q8com offline


Junior Member



 
Joined: Fri Nov 05, 2021 12:10 pm
Posts: 5
Has thanked: 0 time
Been thanked: 0 time

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby mimichris » Fri Nov 12, 2021 10:07 am

Hello,
One question: Can Garmin see when studying the GPS file, what it asks me to check what is not working regarding the Galileo satellites, that we have a patched version of the firmware to read IMGs and JNXs? Thank you for your answers.
mimichris offline


Member



 
Joined: Mon Jan 16, 2012 5:35 pm
Posts: 113
Has thanked: 20 times
Been thanked: 43 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby Cnfhbr » Fri Nov 12, 2021 7:41 pm

mimichris wrote:Can Garmin see when studying the GPS file, what it asks me to check what is not working regarding the Galileo satellites, that we have a patched version of the firmware to read IMGs and JNXs?

They won't know anything if you haven't changed the name or firmware version in the patcher settings.
Cnfhbr offline


User avatar Junior Member



 
Joined: Tue Sep 28, 2010 7:07 am
Posts: 48
Has thanked: 0 time
Been thanked: 21 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby mimichris » Fri Nov 12, 2021 7:47 pm

Cnfhbr wrote:
mimichris wrote:Can Garmin see when studying the GPS file, what it asks me to check what is not working regarding the Galileo satellites, that we have a patched version of the firmware to read IMGs and JNXs?

They won't know anything if you haven't changed the name or firmware version in the patcher settings.


I leave the firmware number as the origin of course, but that must change a few bytes in the file?
mimichris offline


Member



 
Joined: Mon Jan 16, 2012 5:35 pm
Posts: 113
Has thanked: 20 times
Been thanked: 43 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby Cnfhbr » Sat Nov 13, 2021 6:23 am

mimichris wrote:I leave the firmware number as the origin of course

In addition, you should not uncheck the "Don't change the About page and the firmware version name" checkbox in the patcher settings.

mimichris wrote:but that must change a few bytes in the file

Don't confuse the .gcd firmware file with the GarminDevice.xml file that is being asked for ...
Cnfhbr offline


User avatar Junior Member



 
Joined: Tue Sep 28, 2010 7:07 am
Posts: 48
Has thanked: 0 time
Been thanked: 21 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby mimichris » Sun Nov 14, 2021 10:08 am

Cnfhbr wrote:
mimichris wrote:I leave the firmware number as the origin of course

In addition, you should not uncheck the "Don't change the About page and the firmware version name" checkbox in the patcher settings.

mimichris wrote:but that must change a few bytes in the file

Don't confuse the .gcd firmware file with the GarminDevice.xml file that is being asked for ...


the GarminDevice.xml did have firmware 3.82 so modified however when I see the 66sr info page it is 3.80.
I modified the GarminDevice and put 3.80.
mimichris offline


Member



 
Joined: Mon Jan 16, 2012 5:35 pm
Posts: 113
Has thanked: 20 times
Been thanked: 43 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby GarminNuvi » Sun Nov 14, 2021 9:05 pm

mimichris wrote:
Cnfhbr wrote:
mimichris wrote:I leave the firmware number as the origin of course

In addition, you should not uncheck the "Don't change the About page and the firmware version name" checkbox in the patcher settings.

mimichris wrote:but that must change a few bytes in the file

Don't confuse the .gcd firmware file with the GarminDevice.xml file that is being asked for ...


the GarminDevice.xml did have firmware 3.82 so modified however when I see the 66sr info page it is 3.80.
I modified the GarminDevice and put 3.80.

The Patched Firmware you used was advanced in the Patcher, if you are returning the device to Garmin just reinstall the original firmware.
There is no file size change as you can see.
Image
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2033
Location: On the move
Has thanked: 168 times
Been thanked: 4097 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby mimichris » Mon Nov 15, 2021 8:45 am

GarmanNuvi wrote:
the GarminDevice.xml did have firmware 3.82 so modified however when I see the 66sr info page it is 3.80.
I modified the GarminDevice and put 3.80.

GarmanNuvi wrote:The Patched Firmware you used was advanced in the Patcher, if you are returning the device to Garmin just reinstall the original firmware.
There is no file size change as you can see.


Hello,
I am not returning the 66sr to Garmin but some files from the 66sr as mentioned by Garmin below:

"Windows
Connect the Garmin device to the computer.
Press the Windows key + E on the keyboard to open Windows Explorer/File Explorer.
Select This PC (Windows 10 only).
Open the Garmin drive listed.1
Right-click the Garmin Folder and select Copy.2
Right-click on the Desktop and select Paste.
Double-click the new Garmin folder on the Desktop to open it.
Delete or drag any Disk Image Files (.img files) to the Recycle Bin.
Delete or drag any folders with names BirdsEye, Custom Maps, GGZ, JPEG/JPG, or Voice to the Recycle Bin.
Close the Garmin folder window.
Right-click the Garmin folder on the desktop.
Select Send to.
Select Compressed (zipped) folder.
Attach the new Garmin.zip file on the desktop to an email reply to Product Support."

Here is the GarminDevice.xml:

<?xml version="1.0" encoding="UTF-8"?>
-<Device xsi:schemaLocation="http://www.garmin.com/xmlschemas/GarminDevice/v2 [Please Register or Login to download file] " xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.garmin.com/xmlschemas/GarminDevice/v2">
-<Model>
<PartNumber>006-B3694-00</PartNumber>
<SoftwareVersion>380</SoftwareVersion>
<Description>GPSMAP 66sr</Description>
</Model>
<Id>XXXXXXXXXXX</Id>
-<Unlock>
<Code>WFF38COURTESP2V6JE2NV</Code>
</Unlock>
-<Unlock>
<Code>UEXP3QB5D645PONFESTD827H</Code>
</Unlock>
-<MassStorageMode>
-<DataType>
<Name>UserDataSync</Name>
-<File>
<Specification>

<Identifier>http://www.topografix.com/GPX/1/1</Identifier>

<Documentation>http://www.topografix.com/GPX/1/1/gpx.xsd</Documentation>

</Specification>

-<Location>
<Path>Garmin/GPX</Path>
<FileExtension>GPX</FileExtension>

</Location>

<TransferDirection>InputOutput</TransferDirection>

</File>

</DataType>


-<DataType>

<Name>CustomMaps</Name>

ETC.........................

Nothing in this files says I have modified firmware, there is no GUPDATE.GCD file.
mimichris offline


Member



 
Joined: Mon Jan 16, 2012 5:35 pm
Posts: 113
Has thanked: 20 times
Been thanked: 43 times

Re: Garmin Image Unlock - gimgunlock v.0.04

Postby klausb » Thu Nov 18, 2021 8:00 am

is this tool still working? I've tried US Map placed it on SD card but got an error and can't use the card.
klausb offline


Junior Member



 
Joined: Sun Mar 21, 2010 12:29 pm
Posts: 7
Has thanked: 1 time
Been thanked: 0 time

Re: Garmin Image Unlock - gimgunlock v.0.04

Postby GarminNuvi » Thu Nov 18, 2021 8:47 am

klausb wrote:is this tool still working? I've tried US Map placed it on SD card but got an error and can't use the card.

Yes still works to Unlock .img files, but some devices require patching to use unlocked maps and other later devices cannot be Patched
Not seen can't use the card ,only "Can't Unlock Maps" or "Can't Authenticate Maps"
Give more detail about the device and map then we can point you in the right direction
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2033
Location: On the move
Has thanked: 168 times
Been thanked: 4097 times

Software to create "Updater" file to unlock Garmin units

Postby ozwide » Fri Nov 19, 2021 4:05 am

Hi guys,
What a great forum this is so much information. I am a newbie to this forum so please excuse me if I ask a simple question.
Can someone please point me in the right direction please?

I am looking for software to create an "Updater" file that is used to unlock Garmin units. I am not sure if it is software or a tool?
Any help would be very much appreciated.

All the best and thank you.
Rob
ozwide offline


Junior Member



 
Joined: Sun Feb 01, 2015 10:23 am
Posts: 12
Has thanked: 0 time
Been thanked: 0 time

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby GarminNuvi » Fri Nov 19, 2021 4:42 am

@ozwide
I moved your post here, hardly a "newbie" I spent a lot of time via PM helping you with Australia & New Zealand maps and explained about Unlocked maps and devices that need to be Patched using the Universal Firmware Patcher for Protected Garmin Devices to use them. This patching is device specific determined by the HWID as shown in the garmindevice.xml as you can see by the previous posts here.

Fri May 29, 2020 10:07 am
by ozwide

Hi
Thanks for getting back to me. Its going to take me a little while to get my head around this. I will let you know how I go. Thank you for your time.
Kind regards
Rob
Before you post, "The archive is corrupt or damaged"
Please make sure your archive software is up to date or just Use the latest [Please Register or Login to download file]
GarminNuvi offline


User avatar Senior Moderator



 
Joined: Tue May 16, 2017 5:19 am
Posts: 2033
Location: On the move
Has thanked: 168 times
Been thanked: 4097 times

Re: Universal Firmware Patcher for Protected Garmin Devices

Postby lambda14 » Sat Nov 20, 2021 8:25 am

Hello,
I have a edge 830, and I can't read a map unlocked. I don't found any working patcher for the edge 830.
Are you a solution for this model of garmin ?
Thank you
lambda14 offline


Junior Member



 
Joined: Wed Aug 10, 2011 12:31 am
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

PreviousNext

Return to Software

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: Bing [Bot] and 31 guests