yasser1234 wrote:Hello. i want some intersections or patch to put unlock maps in my garmin nuvi 2699 v8.80. thank you very much

yasser1234 wrote:<Model>
<PartNumber>006-B1948-00</PartNumber>
<SoftwareVersion>880</SoftwareVersion>
<Description>nüvi 2699</Description>

• Improved Russian translations.
• Improved software stability.

Hidden Content

This board requires you to be registered and logged-in to view hidden content.

yasser1234 wrote:sorry for the inconvenience. can you tell me the steps to follow to pass this flash kit. thank you very much

• Download the RAR file from the Link attached then extract directly to a clean microSD formatted in FAT32 (best using WinRar to extract).
• If your device has a Firmware version lower than 8.80 all is okay, otherwise a firmware downgrade is advisable, although it should not be necessary because I forced a firmware version of 8.81
  Anyway, you can download an older firmware release from here:

  Code: Select all

  [URL=https://web.archive.org/web/20200503191837/http://gawisp.com/perry/nuvi/]Index of /perry/nuvi[/URL]

• Ensure the device is fully OFF (not in standby), insert the card in device and power on.
• "Loader" will appear on screen for some time and the device will boot up when the flash of patched firmware is complete.
  The device can reboot itsself during the process.
• After the Patch is applied the device will be able to read Unlocked Maps.
• When the flash has completed remove the card, in its root will be a new file named 154.bin.
  That's a backup of the device's non-volatile memory region and may save your device at a later date.
  You would be best to keep a copy of it somewhere safe for as long as you have the device.
• In case of flashing of a new version of the Original Firmware the Patch must be repeated, so you have not run Garmin Express with device connected as the software update first Firmware Device if any available. Do one of the following alternative ways:
  Methode 1 (with device NOT connected)
  
  1. Get file GarminDevice.xml from your Device (you find it in folder \Garmin)
  2. Put the file in a Removable device, as an SD Memory or an USB stick (8 or 16 GB) in folder \Garmin
  3. Run Garmin Express, your Device will be recognized as well
  4. Do all the Update you want (when GE ask you to reboot device, simply secure remove your memory from PC and reinsert again)
  5. When Update finishes you will have ALL the files you need in the memory, simply move them into device.
  6. Using this Tip you have all the vantages of Garmin Express, without any problem of bricking, and you leave the Firmware release untouched
  Methode 2 (with device USB connected)
  
  1. With the device connected GE copy new Firmware Update (if any available) into device and ask for reboot
  2. Do not remove the device (this is very important) but move GUPDATE.GCD in your PC (you find it in folder \.System)
  3. Patch your Firmware using Firmware Patcher. You get a file renamed as GUPDATE_Patched.GCD
     This file must be renamed as GUPDATE.GCD and copied onto device overwriting the existing one
  4. Now you can surely reboot your device. The Firmware loaded will be patched as well

yasser1234 wrote:thank you very much.Loader does not want to appear

• Hold the power key until a prompt appears on the screen.
• The prompt appears after five seconds. If you release the power key before the prompt appears, the device enters sleep mode.
• Select Off.

pikitui wrote:Hi,
I need a custom firmware to test JNX maps.
<Model>
<PartNumber>006-B3445-00</PartNumber>
<SoftwareVersion>270</SoftwareVersion>
<Description>eTrex 32x</Description>

• Fixed routing on City Navigator maps

Hidden Content

This board requires you to be registered and logged-in to view hidden content.

nordicwild wrote:Bought Birdseye subscription but it can not be registrered to the Epix. Thanks