ForumI need some help with my Binatone A430! I upgraded it to TomTom 7.450 with UK Maps 880.3811 and used AutoActivate to create the META.txt file. However when turning on the satnav, the tomtom software loads fine but it says 'No GPS device!', hence its unable to connect to any satellites. My SD card contains the following:
Navigator (folder)
United Kingdom and Republic of Ireland 880.3811 (folder)
ttnavigator
META.txt
SHELL
Where am i going wrong here? Help would be appreciated!
- Contact •
- FAQ •
- Register •
- Login
- View unanswered posts • View active topics
-
Board index ‹ GPS Utilities & Unlock ‹ GPS Utilities ‹ Tools & Tutorials
Guide to Binatone devices
by andyd21_8 » Sun Aug 19, 2012 12:20 am
Hi mate, your incredibly knowledgeable about all this stuff can you help me out please?
I have the CE6 i assume as i have a 4 tone chime when starting up, I have downloaded all the igo primo files and put them on to a SD card but don't work when i plug it in :( now I came across your post here now I am lost? :( I have a binatone F430 I just want to be able to get European maps for free if you can help be great thanks :) oh by the way I'm thick at this kind of stuff :( hack an iphone is my best LOL
I have the CE6 i assume as i have a 4 tone chime when starting up, I have downloaded all the igo primo files and put them on to a SD card but don't work when i plug it in :( now I came across your post here now I am lost? :( I have a binatone F430 I just want to be able to get European maps for free if you can help be great thanks :) oh by the way I'm thick at this kind of stuff :( hack an iphone is my best LOL
-
andyd21_8
offline
- Joined: Sat Aug 18, 2012 11:59 pm
- Posts: 8
- Has thanked: 0 time
- Been thanked: 0 time
by Fatboyfun » Sun Aug 19, 2012 1:28 am
Define don't work...
Original software starts
Primo starts but closes
Nothing happens
Check the primo folder on the sd card contains the executable among others and not just one folder...
Original software starts
Primo starts but closes
Nothing happens
Check the primo folder on the sd card contains the executable among others and not just one folder...
by andyd21_8 » Sun Aug 19, 2012 11:18 am
oh right yeah of course that would help sorry,
ok so i put the sd card in nothing just starts as normal,
I can open all the files through my laptop using the usb cable found the file called MobileNavigator not quite sure if i am men't to change that or the one on the sd card?
I have also put on the sd card \windows\explorer.exe in a shell ini file so i then opened the PDA/satnav as a pc and looked around and found both sets of files but just get it it start up as primo :( I do have to point out mate I am a complete novice at this thing and probably need more help than someone else very sorry :(
ok so i put the sd card in nothing just starts as normal,
I can open all the files through my laptop using the usb cable found the file called MobileNavigator not quite sure if i am men't to change that or the one on the sd card?
I have also put on the sd card \windows\explorer.exe in a shell ini file so i then opened the PDA/satnav as a pc and looked around and found both sets of files but just get it it start up as primo :( I do have to point out mate I am a complete novice at this thing and probably need more help than someone else very sorry :(
-
andyd21_8
offline
- Joined: Sat Aug 18, 2012 11:59 pm
- Posts: 8
- Has thanked: 0 time
- Been thanked: 0 time
by Fatboyfun » Sun Aug 19, 2012 11:36 am
You don't have to change anything in the internal memory, so there is no need to connect with a USB cable.
The package was designed to be as easy as possible to install, simply put the shell.ini and the mobilenavigator folder onto a blank sd card, so that when you open the card from (My) Computer that's what you see.
Put the card into the device, switch off and then back on and then tap navigation.
Make sure the shell.ini and MobileNavigator folder is not inside another folder like the one created by winrar, also make sure you're using a sd card not a sdhc card.
The package was designed to be as easy as possible to install, simply put the shell.ini and the mobilenavigator folder onto a blank sd card, so that when you open the card from (My) Computer that's what you see.
Put the card into the device, switch off and then back on and then tap navigation.
Make sure the shell.ini and MobileNavigator folder is not inside another folder like the one created by winrar, also make sure you're using a sd card not a sdhc card.
by andyd21_8 » Tue Aug 21, 2012 9:29 pm
I sorted it now I just downloaded another file i found and removed the original files to my pc for safe keeping and it worked perfect :) thanks for your help though
-
andyd21_8
offline
- Joined: Sat Aug 18, 2012 11:59 pm
- Posts: 8
- Has thanked: 0 time
- Been thanked: 0 time
by andyd21_8 » Tue Aug 21, 2012 11:17 pm
I tried using a SD card and renaming the file what you said to but it just would not open it that way at all :( so I then open the direct drive and removed the original files to my desk top and then put on the IGO files and renamed the file as you stated and it started and works really well, I do have one question for you if you don't mind. I put on 4 UK files as I didnt know which ones i was supposed to as in file name FBL, FDA FTR, etc etc which one do i use??
-
andyd21_8
offline
- Joined: Sat Aug 18, 2012 11:59 pm
- Posts: 8
- Has thanked: 0 time
- Been thanked: 0 time
-
- Related topics
- Replies
- Views
- Last post
-
- Mortscript Guide
1, 2, 3by Fatboyfun » Fri Dec 10, 2010 8:29 pm - 40 Replies
- 40108 Views
- Last post by justbyaccident
Mon May 18, 2020 7:35 pm
- Mortscript Guide
-
- Which Binatone ?
1, 2by Bootech » Sat Oct 19, 2013 10:23 am - 19 Replies
- 6436 Views
- Last post by Bootech
Mon Oct 28, 2013 7:33 pm
- Which Binatone ?
-
- Unlock Binatone u435 for iGo, if possible !
by ramses505 » Wed Dec 30, 2020 12:38 pm - 1 Replies
- 1859 Views
- Last post by jimmy888
Wed Mar 16, 2022 11:34 pm
- Unlock Binatone u435 for iGo, if possible !
-
- Binatone F350 power-up problem
by jobytug » Sat Nov 24, 2012 1:05 pm - 7 Replies
- 3895 Views
- Last post by Fatboyfun
Sat Nov 24, 2012 8:23 pm
- Binatone F350 power-up problem
-
- A Working Binatone A350 (model 4019) Boot Rom
by cupid_stunt » Fri Jul 19, 2013 2:50 pm - 0 Replies
- 3279 Views
- Last post by cupid_stunt
Fri Jul 19, 2013 2:50 pm
- A Working Binatone A350 (model 4019) Boot Rom
Who is online
Users browsing this forum: No registered users and 4 guests
News
Site map
SitemapIndex
RSS Feed
