Sun Dec 11, 2016 6:17 pm
Sun Dec 11, 2016 7:07 pm
Mon Dec 12, 2016 12:33 pm
holyhead wrote:first check your bootloader
Checking bootloader (the only reliable method)
Enter a device reset 15 sec.
Then turn on the device and hold the start button until you
get info screen. Which bootloader is there.
---
Update (if your current bootloader version is lower)
This first to version 5.5022 .
!! BE SURE THAT THE BATTERY IS FOR MORE THEN 50% CHARCHED !!
http://www8.zippyshare.com/v/lpaabePt/file.html
Put the bootloader on a SD card 2GB or less. Read the txt file wich included in the
bootloader.
If your current boot loader, is version 1.xxxx stop first !! and report it here on the forum.
Mon Dec 12, 2016 2:15 pm
moonchild90 wrote:holyhead wrote:first check your bootloader
Checking bootloader (the only reliable method)
Enter a device reset 15 sec.
Then turn on the device and hold the start button until you
get info screen. Which bootloader is there.
---
Update (if your current bootloader version is lower)
This first to version 5.5022 .
!! BE SURE THAT THE BATTERY IS FOR MORE THEN 50% CHARCHED !!
[Please Register or Login to download file]
Put the bootloader on a SD card 2GB or less. Read the txt file wich included in the
bootloader.
If your current boot loader, is version 1.xxxx stop first !! and report it here on the forum.
Thanks guys
So my bootloader is at 5.3026
I'll have a look at the download.
Thanks again
Mon Dec 12, 2016 3:57 pm
Mon Dec 12, 2016 4:03 pm
moonchild90 wrote:Guys... plz.
I have now updated to S5.5022
But I still get this error when I put the card in...
Mon Dec 12, 2016 4:11 pm
holyhead wrote:moonchild90 wrote:Guys... plz.
I have now updated to S5.5022
But I still get this error when I put the card in...
And there is a navcore on the SD Card ?
Mon Dec 12, 2016 4:15 pm
Mon Dec 12, 2016 4:21 pm
holyhead wrote:Your device read from intern or extern (not both). So if you want to use an SD card with maps then you have to read from extern. So navcore and map on the SD card. Activate map. Card in Device and 15 sec reset. Now it should work.
Mon Dec 12, 2016 4:40 pm
Mon Dec 12, 2016 5:59 pm
moonchild90 wrote:holyhead wrote:Your device read from intern or extern (not both). So if you want to use an SD card with maps then you have to read from extern. So navcore and map on the SD card. Activate map. Card in Device and 15 sec reset. Now it should work.
I dont have any files named "navcore"
Mon Dec 12, 2016 6:11 pm
Mon Dec 12, 2016 6:16 pm
moonchild90 wrote:Ok
So now it works fine!
Thanks! :-)